Notice of Participation in InterAqua 2019 10th International Water Solutions Comprehensive Exhibition

Dehydration of sludge with a moisture content of 50-80 wt% is possible without the addition of a coagulant! The SS of the filtered water is achieved at less than 1 mg/L!

The Yuasa backwash-type flat membrane system is a device that forms a sludge cake layer on the surface of the flat membrane through suction filtration and detaches and collects the cake through backwashing. It can be used for the recovery of silicon polishing powder, rare metals, and other inorganic SS. It enables sludge dewatering with a moisture content of 50-80 wt% without the use of coagulants, and by employing a membrane with a nominal pore size of 0.25 μm, it achieves SS levels in the filtrate of less than 1 mg/L! ★ Free evaluation test campaign currently underway ★ 【Features】 ■ Enables sludge dewatering with a moisture content of 50-80 wt% without the use of coagulants ■ Achieves SS levels in the filtrate of less than 1 mg/L due to the use of a membrane with a nominal pore size of 0.25 μm *For more details, please refer to the PDF document or feel free to contact us.

• Separation device
• Water treatment equipment
• Wastewater/wastewater treatment equipment

Membrane technology holds great promise as a solution for challenging problems in the field of water treatment!

In recent years, as interest in environmental issues has increased, the demand for environmental purification using membranes has also been growing year by year. In particular, water is recognized as a globally important resource, and its significance is expected to increase even more in many countries and regions in the future. Over the past five years, interest and demand for environmental purification and water treatment methods using membranes have steadily grown, and our company has also expanded its performance through the introduction of membrane products focused on wastewater treatment. Today, membrane technology is highly anticipated as a core technology to solve challenging problems in all areas of water treatment. In this social environment, our company positions the purification and recycling of water through membrane technology as a top priority, and we will contribute to the harmony and improvement of the natural environment and people's lives through the development and supply of membrane products.

• Separation device

Reduction of sludge volume and reduction of transaction volume are possible!

The backwash-type Yuasa is a backwash immersion membrane separation device that can efficiently perform filtration, sludge recovery, and sludge concentration. It filters the concentrated liquid in the immersion tank by suction, causing sludge to adhere to the membrane surface. After a certain period, the membrane module rises and backwashes to detach the sludge from the membrane surface. It enables sludge volume reduction and the recovery of chemical-free sludge.

• Separation device

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.