Features of TEAC Load Cells

The TD-01 Portable Digital Indicator is a digital indicator for strain gauge transducers.

The signals input from the transducer are displayed as digital values or analog waveforms. The display screen features a highly visible color LCD, and it is equipped with an A/D converter capable of high-speed processing. It also includes data recording functionality, sensor disconnection check functionality, and compliance with the TEDS standard, achieving high functionality and low cost in a portable form. It supports two languages, allowing for use in overseas production facilities with the same feel as in the domestic market. It can be used with strain gauge-type load cell sensors regardless of the manufacturer.

• Weight related measuring instruments
• Other weight measuring instruments
• Other measurement, recording and measuring instruments

Due to its small size and low dosage, it is easy to mount on testing machines such as pressure testers.

Due to its small size and low dosage, it is easy to mount on pressure testing machines and the like. Old model name TU-MXR: The basic specifications remain the same as the conventional product, now compliant with environmental standards (RoHS). Features: Thin airtight structure, compact, lightweight, connector type.

• Scale
• Other weight measuring instruments

This is a load cell for crystal pulling.

It is a load cell used to lift silicon, which is necessary for semiconductor wafers, and single crystals such as sapphire.

• Other weight measuring instruments

It is a compact, lightweight, and easy-to-use load cell that can be used for both tension and compression, suitable for a wide range of applications from integration into production line equipment to experimental use.

This is a compact, lightweight, and easy-to-use load cell that can be used for both tension and compression, suitable for a wide range of applications from integration into production line equipment to experimental use. Standard features: Robot cable and TEDS functionality. The old model name TU-QR has retained the basic specifications of the conventional model while adding TEDS functionality and complying with environmental standards (RoHS).

• Scale
• Other weight measuring instruments

Ultra-high precision type, sealed structure, high stability in electrical characteristics and temperature characteristics, made to order.

This model has even higher precision than the high-precision tension and compression load cell TU-PGRS. It employs a high-impedance circuit to minimize temperature drift caused by self-heating. Old model name TU-PGRH: The basic specifications remain the same as the conventional model, now compliant with environmental standards (RoHS). Features: Ultra-high precision type, sealed structure, high stability in electrical and temperature characteristics, made to order.

• Scale
• Other weight measuring instruments

Thin type, shear type, center hole type

This load cell is suitable for situations where there are height restrictions due to its slim design. When applying continuous repetitive loads, extending the fatigue life can be achieved by using it at less than half of its rated capacity. It has excellent resistance to eccentricity and fatigue characteristics. Accuracy class: 0.05% (excluding some ratings) TU-GR-G: Direct cable output TU-NR-C: Connector type

• Scale
• Other weight measuring instruments

Slim, RoHS compliant, built-in TEDS, removable load button

This is a removable thin load cell with a road button. Standard robot cable. Built-in TEDS function. What is TEDS calibration? https://loadcell.jp/info/teds.html

• Scale
• Other weight measuring instruments

TEAC's load cell. It is compact, lightweight, high-precision, and customizable.

It is a compact, lightweight, and high-precision TEAC load cell for semiconductor production equipment.

• Weight related measuring instruments

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall