Thank you for visiting the Cosmetics Development Exhibition.

High power for reduced heating time! Stainless container with a heater that can warm up in a short time.

1. Compact Equipment The heater unit is directly attached to the container, making the equipment compact and space-efficient. Since all the devices are mounted on the container, moving it is easy. 2. No Initial Cost Chillers with both heating and cooling functions are expensive and have a higher initial cost compared to heaters. If only heating of the jacket is needed, heaters are overwhelmingly more cost-effective in terms of initial investment. 3. Can Quickly Heat the Jacket By adopting a 7.5kW heater, the water in the jacket can be heated to high temperatures in a short time, warming the contents. Product Features - The heater is installed in the jacket section, allowing for liquid heating with just this unit. - It has a dry-run prevention feature, so the heater stops when the water in the jacket is low. - Equipped with a level gauge to check the water level in the jacket. - The temperature of the mixed liquid can be adjusted through the linkage between the thermometer and the heater. - A stirrer can be attached to the container, allowing for uniform heating of the contents. As this is a made-to-order product, modifications to "dimensions" and "materials" can be made, as well as custom processing to suit specific applications.

• tank

Recommended for liquid stirring and discharge! A stirring unit that combines a stirrer and a valve with a stainless steel container.

○ The container has a bottom plate that is inclined in the discharge direction, allowing for complete liquid discharge without residue. ○ It is equipped with a centrifugal stirrer that can mix low to medium-high viscosity liquids, without any blades. ○ The stirrer can be selected between air motor type and electric motor type. ○ The valve is a straight type with low flow resistance and features a diaphragm design that is excellent in chemical resistance. ○ The stirrer and valve can be easily disassembled and cleaned with a Heller connection.

• Stainless steel container

This is an original air motor mixer from Nitto Metal Industry. It is ideal for preventing foaming during mixing and for stirring high-viscosity liquids.

- It can stir in a sealed state with a Heller connection. Pressure reduction is also possible. - It can stir liquids with low to medium-high viscosity. - It comes standard with a waste receiver to prevent contamination from wear particles generated at the shaft seal. - The stirring body is a Bernoulli flow stirring body type BEAG E, which is less likely to incorporate air. (Patent No. 6169207) - It can be used in explosion-proof areas. - Made entirely of stainless steel, it is resistant to rust and hygienic. - It can be used without lubrication, so there is no oil splatter. For more details, please visit our website. https://www.monovate.co.jp/shop/g/gntma-s/

• Mixer/agitator

This is an original electric motor stirrer from Nitto Metal Industry. It is ideal for preventing foaming during stirring and for stirring high-viscosity liquids.

- It features an easy-to-remove and attach connection. - It can stir in a sealed state and is usable under both pressurized and vacuum conditions. - It can stir liquids with low to medium-high viscosity. - It comes standard with a debris collector to prevent contamination from wear particles generated at the shaft seal. - The stirring element is a Bernoulli flow stirring element type BEAG E, which is designed to minimize air entrapment. (Patent No. 6169207) - It is equipped with a standard controller that allows for speed adjustment. For more details, please visit our website. https://www.monovate.co.jp/shop/g/gntme-a/

• Other energy equipment

All-stainless baffle plate (obstruction plate) that can be installed on the helix. It is easy to clean and has excellent sanitary properties.

- The liquid flow generated by the agitator creates turbulence when it hits the baffle plate, improving mixing efficiency. - It is ideal for uniformly stirring and mixing contents. - The tri-clamp connection allows for easy installation and removal. - With a sanitary design that eliminates gaps through full circumferential welding, it is easy to clean and hygienic. - If your current equipment or tank lid has tri-clamp piping, it can be installed immediately. - Custom design and manufacturing are also available.

• Stainless steel container

There are electric motor type and air motor type stirrers for general industrial use. I have summarized the differences between them.

The mixer is used in various applications such as stirring and blending liquid materials, combined with a stainless steel container. Here, we summarize the features, advantages, and disadvantages of electric motor mixers and air motor mixers.

• Stainless steel container

What is the optimal mixer for a stirring container, considering the installation method, drive system, and the shape of the stirring blades?

When using stainless steel containers, there are various requirements for the containers depending on their intended use. Stirring machines play a crucial role when mixing materials or agitating to produce products. Here, we will explain the various stirring machines that are commonly used with our stainless steel containers. However, what is written here is an introduction to those that are generally known, and there are many other types of stirring machines depending on the materials, applications, and usage environments. When considering containers, we will propose the most suitable stirring machine that matches the contents. We hope this explanatory document will serve as a reference when considering stainless steel containers.

• Stainless steel container

In civil engineering sites, the use of sheet piling methods is essential for safely utilizing the site, including temporary roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates have been widely used, but due to their weight, they can be cumbersome to transport, install, and remove. Hyper CLT sheet piles are civil engineering materials made from wooden CLT for civil use. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to handle with small machinery, contributing to reduced burdens during installation and improved work efficiency. They can be utilized in a wide range of civil engineering sites for measures against muddy conditions, ground protection, heavy machinery scaffolding, and ensuring pedestrian pathways. As a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism NETIS "TH-250021-A," it is also recommended as a material for innovative ideas, safety measures, and environmental considerations in public works.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites, there are many instances where temporary roads, access routes, heavy machinery workspaces, and material storage areas use ground plates. Traditional steel plates are heavy, requiring large machinery for installation and removal, which can make work difficult in narrow sites. Hyper CLT ground plates are lightweight civil engineering CLT materials made from wooden CLT for civil use. A 5×10 plate weighs about 230 kg, and a 5×20 plate weighs about 460 kg, making them easy to handle even with small machinery, thus reducing the burden of transportation, installation, and removal. They are easy to use in sites with limited space or where the use of large machinery is difficult. They can be widely used for temporary roads, heavy machinery scaffolding, pathways within the site, and material storage protection, contributing to glare reduction, noise reduction, and environmental consideration. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," they are also recommended as materials for innovative ideas and safety measures in public works.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!