【Event Date: 2019/3/5-8】Writing Fair 2019

This single unit provides reliable lighting for both normal and emergency situations! It is a waterproof emergency lighting fixture with an IP55 protection rating, suitable for outdoor use.

The moisture-proof and waterproof emergency LED lighting fixtures (VYAA and VYBA series) comply with protection rating IP55 and can be installed in indoor environments where dust is generated or in outdoor environments without a roof. The inherent energy consumption efficiency is 142 lm/W (*1), achieving one of the highest energy efficiencies in the industry for waterproof emergency LED lighting fixtures. Additionally, by offering two types of body materials—stainless steel for the LYAA series and steel plate for the LYBA series—we provide a total of 160 models with a rich variety of products, allowing you to choose the optimal model according to the installation location. Separate from the light source that operates normally, the emergency light source, which lights up during a power outage using a built-in rechargeable battery, is consolidated at the end of the fixture. When installed in the same area as the moisture-proof and waterproof LED fixtures (LYAA and LYBA series), the design can be unified. Furthermore, the installation spacing during emergency lighting can be wider than that of conventional light sources (fluorescent lamps), allowing for a reduction in the number of installations. This helps to keep initial costs down during new installations or upgrades. <Product Variations> Total of 160 models Brightness: 5 types Mounting types: 8 types Body materials: 2 types Light source color (color temperature): 2 types

• LED lighting

The first in the domestic industry: Emergency LED lighting equipment that can be used in explosion-proof areas. Certified by the Industrial Safety and Technology Association, approved by the Minister of Land, Infrastructure, Transport and Tourism, displaying the JIL mark.

The first in the domestic industry: Emergency LED lighting fixtures that can be used in explosion-proof areas Launch of explosion-proof emergency LED lighting fixtures (VZAA series) We have launched the first explosion-proof emergency LED lighting fixtures in the domestic industry that can be installed in explosion-proof areas where there is a risk of explosion or fire due to flammable gases or combustible liquids. Currently, emergency lighting fixtures specified by the Building Standards Act are limited to "incandescent lamps" and "fluorescent lamps," and the use of LEDs as emergency light sources has not been permitted. Therefore, while there have been LED emergency lighting fixtures that received certification based on the Minister of Land, Infrastructure, Transport and Tourism's certification system and passed the self-assessment of emergency lighting fixtures by the Japan Lighting Manufacturers Association, they could not be used in explosion-proof areas where there is a risk of explosion or fire. In response to the many voices wishing for the use of LED as an emergency light source even in explosion-proof areas, we have developed explosion-proof emergency LED lighting fixtures that have passed type testing from the Japan Industrial Safety and Health Association, received certification from the Minister of Land, Infrastructure, Transport and Tourism, and display the JIL mark from the Japan Lighting Manufacturers Association, making us the first in the domestic industry to do so. Orders will begin on September 15, 2016. Since the JIL mark is affixed to the product, the building confirmation process can continue smoothly as before.

• LED lighting

Contributing to the all-LED lighting in industrial areas! Launching fluorescent lamp alternatives equipped with LED emergency light units and sealed emergency LED lighting fixtures.

The sealed emergency LED lighting fixtures (VCMA series) comply with protection rating IP55 and can be installed in indoor environments where dust is generated or in outdoor environments without a roof. Utilizing our unique optical design technology, we ensure efficient brightness in both normal and emergency situations through light distribution control. Particularly during emergency lighting, the installation spacing can be wider than traditional light sources (fluorescent lamps), allowing for a reduction in the number of units installed and lowering initial costs. The straight tube LED lamp, which serves as the light source during normal operation, is housed in a highly sealed lamp protection cover, making it resistant to dirt and corrosion, and protecting the lamp from external impacts. Since a straight tube LED lamp is used, lamp replacement is possible. During a power outage, the emergency light source is consolidated at the end of the fixture and lights up using a built-in battery. When installed in the same area as the sealed LED fixtures (LCMA series), the design can be unified. Additionally, a lamp monitor (green) lights up to indicate the charging status of the emergency light at a glance. If the green lamp is lit during normal operation, it indicates normal function; if the lamp monitor is off, it is time to replace the rechargeable battery due to its lifespan. The estimated lifespan of the rechargeable battery is 4 to 6 years. Battery replacement can be easily and quickly performed while the fixture is installed.

• LED lighting

We will be exhibiting at the J AGRI (J Agri) / Agricultural Materials EXPO held at Gran Messe Kumamoto from May 22 (Wednesday) to May 24 (Friday), 2024. 【Booth Number】: B1-43 Outdoor Exhibition Area Japan's largest comprehensive exhibition for agriculture and livestock, Agricultural WEEK, will be renamed J AGRI starting in 2024. This is a place where you can actually see, touch, and compare products. At our booth, we will showcase our lightweight resin flooring boards "JULIGHT / SUPER JULIGHT / RAKURAKUBAN" along with new products. Starting with the agricultural-specific flooring board "RAKURAKUBAN," which can be easily laid in various scenes such as around greenhouses, agricultural work sites, temporary parking lots, for the movement of agricultural machinery and light trucks, and for protecting truck beds, there are various ways to use the lightweight resin flooring boards "JULIGHT / SUPER JULIGHT series." We offer a variety of sizes and protrusion shapes tailored to customer needs, and they are lightweight enough to be carried by hand, with excellent impact resistance, as well as superior water resistance, weather resistance, and durability, providing outstanding features not found in plywood or steel plates. We sincerely look forward to your visit.

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

We would like to inform you that we will be exhibiting our products at the 25th Annual Meeting of the Japanese Society for Protein Science. If you plan to attend, please feel free to stop by. ❚ 25th Annual Meeting of the Japanese Society for Protein Science Date: June 18 (Tuesday) - June 20 (Thursday), 2025 Venue: Acurie Himeji Exhibition Booth: For details, please visit the official website of the Japanese Society for Protein Science. URL: https://aeplan.jp/pssj2025/ ❚ Products to be Exhibited - Transporter Measurement Device | SURFE2R N1 This device allows for label-free and real-time direct measurement of transporter currents without using fluorescent probes or radiolabeled ligands. - Artificial Lipid Bilayer Experimental Device | Orbit mini This device simplifies the challenging tasks of forming lipid membranes, reconstructing membrane proteins, and measuring single-channel currents in experiments using artificial lipid bilayers, all with just a micropipette. - Liposome Preparation Device | Vesicle Prep Pro This single device enables easy preparation of liposomes without hassle, accommodating various lipid conditions (such as DPhPC, DPPC, DOPC, etc.).

We will be exhibiting at the "Kyushu Printing Information Industry Exhibition 2026" held at the Fukuoka International Center. During the event, we will showcase various products. We invite all related parties to come together and visit us. 【Suppliers】 ・Laser-X