[Custom Case] Introduction of the Seat Glove Box!

This is a sheet glove box that improves workability by securing a vinyl sheet box with a frame.

It is possible to safely handle hazardous substances during the formulation and weighing processes of raw materials. The box made of vinyl sheet is made of incinerable material and can be disposed of or replaced entirely after use. The frame and box are designed to be connected with Velcro and plastic screws, allowing for easy removal and replacement.

• Other laboratory equipment and containers
• Testing Equipment and Devices
• Glove box

Design and manufacturing with high flexibility in size and specifications is possible.

It is a large vacuum glove box made of acrylic.

• Other physicochemical equipment
• Testing Equipment and Devices
• Glove box

It is possible to design and manufacture with a high degree of freedom in size and specifications.

It is a small vacuum glove box made of acrylic.

• Other physicochemical equipment
• Testing Equipment and Devices
• Glove box

It is possible to design and manufacture with a high degree of freedom regarding the size and specifications of the main body.

It is a large acrylic vacuum glove box.

• Glove box

It is possible to design and manufacture with a high degree of freedom regarding the size and specifications of the main body.

● This is a vacuum and gas replacement type glove box made of acrylic panels with a thickness of 30 to 50 mm. ● It is an independent two-chamber type with a pass box.

• Glove box

It is possible to design and manufacture with a high degree of freedom regarding the size and specifications of the main body.

● It is a large glove box made of acrylic. ● It is manufactured using sheet materials suitable for the products and chemicals being handled.

• Glove box

It is possible to design and manufacture with a high degree of freedom regarding the size and specifications of the main body.

● This is a glove box made of acrylic and PVC sheets. ● It is manufactured using sheet materials suitable for the products and chemicals being handled. ● It can also accommodate special specifications such as UV protection.

• Glove box

It is possible to design and manufacture with a high degree of freedom in terms of size and specifications of the main body.

● It is a large glove box made of PVC. ● It is manufactured with materials suitable for the products and chemicals being handled.

• Glove box

It is possible to design and manufacture with a high degree of freedom regarding the size and specifications of the main body.

● This is a simple glove box made using our original molded aluminum frame. ● The size and specifications of the main body, as well as the frame, can be designed and manufactured with a high degree of flexibility.

• Glove box

It is possible to design and manufacture with a high degree of freedom regarding the size and specifications of the main body.

● This is a simple type glove box using our original molded aluminum frame. ● The size and specifications of the main body, as well as the stand, can be designed and manufactured with a high degree of freedom.

• Glove box

It is possible to design and manufacture with a high degree of freedom regarding the size and specifications of the main body.

● This is a double-chamber glove box equipped with a HEPA filter unit on the ceiling. ● This is a simple type glove box made using our original molded aluminum frame. ● The size and specifications of the main body, as well as the support frame, can be designed and manufactured with a high degree of flexibility.

• Glove box

Are you having trouble managing the temperature in your workspace?

It has excellent airtightness and thermal insulation, allowing for precise temperature control within the box. It is effective for tests using materials that are sensitive to temperature and measurement instruments that are difficult to manage temperature-wise.

• Other physicochemical equipment
• Testing Equipment and Devices
• Glove box

Our "glove box" has been adopted as experimental equipment on the "Kibo" space station! A custom-made product that can be used in outer space.

Our "Glove Box" has been adopted as the equipment for mouse experiments at JAXA's "Kibo" space station! The glove box will be used for tasks such as changing and maintaining breeding cages and collecting samples. 【Features of the Glove Box】 ■ Usable in a wide range of fields including precision machinery, chemistry, biotechnology, pharmaceuticals, and medical applications ■ Custom-made with a proven track record of diverse specifications *Please view the PDF data of the "Glove Box" catalog available for download. *For more details on the adoption case, please refer to page 4 of "Mouse Breeding and Recovery Services in Microgravity Environment."

• Glove box

Glove boxes are required in a wide range of fields, including precision machinery, chemistry, biotechnology, pharmaceuticals, and healthcare! We will shape your needs into a custom-made solution!

Our glove boxes are completely custom-made. We have a proven track record of manufacturing in a wide variety of specifications. Please feel free to contact us!

• Glove box

Aseptic isolator designed for aseptic environment testing in regenerative medicine and pharmaceutical fields!

It can be used as a sterile isolator due to the materials that respond to decontamination work and complete airtightness. A HEPA filter air circulation system ensures a cleanliness level of Class 100.

• Other physicochemical equipment
• Glove box
• Other clean room equipment and facilities

The Ministry of Land, Infrastructure, Transport and Tourism has initiated various construction projects, and safety management and improvement of working conditions during the extreme heat of summer have become significant themes at civil engineering sites. Even as the concept of summer work stoppages spreads, it is important not to rely solely on stoppages but to focus on innovative temporary materials to improve daily site conditions. Hyper CLT sheets are civil engineering materials that utilize wooden CLT. They can be used in various civil engineering sites as a substitute for steel plates, including temporary roads, access routes, heavy machinery work yards, material storage areas, and pedestrian pathways. The 5×10 sheet weighs approximately 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to handle with small machinery, which helps reduce the burden of installation and removal. Thanks to the unique properties of wood, these sheets can help minimize glare compared to steel plates, making them useful for heat stroke prevention measures and environmental considerations during the summer. Additionally, they are expected to provide benefits in terms of construction efficiency and site environment, such as improved transportation efficiency and noise reduction. As a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS "TH-250021-A," they are also recommended for creative proposals in public works. Please consider them as a new option for civil engineering sites looking to address heat-related issues, including summer work stoppages. We also accept inquiries for consultations on implementation tailored to site conditions and requests for materials. We can provide proposals for public works and private civil engineering projects both within and outside Okayama Prefecture. Please feel free to contact us.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites, there are many instances where sheet boards are used for temporary roads, access roads, heavy machinery work yards, material storage areas, and pedestrian pathways. Traditional steel plates are heavy, which can require large cranes or heavy machinery for installation and removal, increasing the workload depending on site conditions. Hyper CLT sheet boards are civil engineering materials made from wooden CLT for civil use. The 5×10 board weighs about 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which allows for easier installation without the need for large cranes. They also contribute to reducing the burden of transportation, installation, and removal, as well as improving maneuverability on site. Recommended as a registered technology by the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," it is suitable for companies considering civil engineering, civil use, and civil CLT. This material is easy to use for creative proposals in public works, such as alternatives to steel plates, common temporary structures, temporary roads, and curing for material storage areas.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!