[Custom Case Study] Introduction of the Cleaning Glove Box!

It is possible to design and manufacture with a high degree of freedom regarding the size and specifications of the main body.

● This is a simple type glove box using our original molded aluminum frame. ● The size and specifications of the main body, as well as the stand, can be designed and manufactured with a high degree of freedom.

• Glove box

It is possible to design and manufacture with a high degree of freedom regarding the size and specifications of the main body.

● This is a double-chamber glove box equipped with a HEPA filter unit on the ceiling. ● This is a simple type glove box made using our original molded aluminum frame. ● The size and specifications of the main body, as well as the support frame, can be designed and manufactured with a high degree of flexibility.

• Glove box

This is a sheet glove box that improves workability by securing a vinyl sheet box with a frame.

It is possible to safely handle hazardous substances during the formulation and weighing processes of raw materials. The box made of vinyl sheet is made of incinerable material and can be disposed of or replaced entirely after use. The frame and box are designed to be connected with Velcro and plastic screws, allowing for easy removal and replacement.

• Other laboratory equipment and containers
• Testing Equipment and Devices
• Glove box

Design and manufacturing with high flexibility in size and specifications is possible.

It is a large vacuum glove box made of acrylic.

• Other physicochemical equipment
• Testing Equipment and Devices
• Glove box

It is possible to design and manufacture with a high degree of freedom in size and specifications.

It is a small vacuum glove box made of acrylic.

• Other physicochemical equipment
• Testing Equipment and Devices
• Glove box

It is possible to design and manufacture with a high degree of freedom regarding the size and specifications of the main body.

It is a large acrylic vacuum glove box.

• Glove box

It is possible to design and manufacture with a high degree of freedom regarding the size and specifications of the main body.

● This is a vacuum and gas replacement type glove box made of acrylic panels with a thickness of 30 to 50 mm. ● It is an independent two-chamber type with a pass box.

• Glove box

It is possible to design and manufacture with a high degree of freedom regarding the size and specifications of the main body.

● It is a large glove box made of acrylic. ● It is manufactured using sheet materials suitable for the products and chemicals being handled.

• Glove box

It is possible to design and manufacture with a high degree of freedom regarding the size and specifications of the main body.

● This is a glove box made of acrylic and PVC sheets. ● It is manufactured using sheet materials suitable for the products and chemicals being handled. ● It can also accommodate special specifications such as UV protection.

• Glove box

It is possible to design and manufacture with a high degree of freedom in terms of size and specifications of the main body.

● It is a large glove box made of PVC. ● It is manufactured with materials suitable for the products and chemicals being handled.

• Glove box

It is possible to design and manufacture with a high degree of freedom regarding the size and specifications of the main body.

● This is a simple glove box made using our original molded aluminum frame. ● The size and specifications of the main body, as well as the frame, can be designed and manufactured with a high degree of flexibility.

• Glove box

Are you having trouble managing the temperature in your workspace?

It has excellent airtightness and thermal insulation, allowing for precise temperature control within the box. It is effective for tests using materials that are sensitive to temperature and measurement instruments that are difficult to manage temperature-wise.

• Other physicochemical equipment
• Testing Equipment and Devices
• Glove box

Our "glove box" has been adopted as experimental equipment on the "Kibo" space station! A custom-made product that can be used in outer space.

Our "Glove Box" has been adopted as the equipment for mouse experiments at JAXA's "Kibo" space station! The glove box will be used for tasks such as changing and maintaining breeding cages and collecting samples. 【Features of the Glove Box】 ■ Usable in a wide range of fields including precision machinery, chemistry, biotechnology, pharmaceuticals, and medical applications ■ Custom-made with a proven track record of diverse specifications *Please view the PDF data of the "Glove Box" catalog available for download. *For more details on the adoption case, please refer to page 4 of "Mouse Breeding and Recovery Services in Microgravity Environment."

• Glove box

Glove boxes are required in a wide range of fields, including precision machinery, chemistry, biotechnology, pharmaceuticals, and healthcare! We will shape your needs into a custom-made solution!

Our glove boxes are completely custom-made. We have a proven track record of manufacturing in a wide variety of specifications. Please feel free to contact us!

• Glove box

Aseptic isolator designed for aseptic environment testing in regenerative medicine and pharmaceutical fields!

It can be used as a sterile isolator due to the materials that respond to decontamination work and complete airtightness. A HEPA filter air circulation system ensures a cleanliness level of Class 100.

• Other physicochemical equipment
• Glove box
• Other clean room equipment and facilities

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

The Ministry of Land, Infrastructure, Transport and Tourism has initiated various construction projects, and safety management and improvement of working conditions during the extreme heat of summer have become significant themes at civil engineering sites. Even as the concept of summer work stoppages spreads, it is important not to rely solely on stoppages but to focus on innovative temporary materials to improve daily site conditions. Hyper CLT sheets are civil engineering materials that utilize wooden CLT. They can be used in various civil engineering sites as a substitute for steel plates, including temporary roads, access routes, heavy machinery work yards, material storage areas, and pedestrian pathways. The 5×10 sheet weighs approximately 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to handle with small machinery, which helps reduce the burden of installation and removal. Thanks to the unique properties of wood, these sheets can help minimize glare compared to steel plates, making them useful for heat stroke prevention measures and environmental considerations during the summer. Additionally, they are expected to provide benefits in terms of construction efficiency and site environment, such as improved transportation efficiency and noise reduction. As a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS "TH-250021-A," they are also recommended for creative proposals in public works. Please consider them as a new option for civil engineering sites looking to address heat-related issues, including summer work stoppages. We also accept inquiries for consultations on implementation tailored to site conditions and requests for materials. We can provide proposals for public works and private civil engineering projects both within and outside Okayama Prefecture. Please feel free to contact us.

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching doorknobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot in front of it. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing types "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with a wide opening, vertical beam type "PF-01S" ○ Slim type with a wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.

In recent years, as infectious diseases have spread, there has been a demand for products that enable "contactless operation," and this trend has extended to environments where automatic doors were previously operated by touch switches. As the automation of doors and the non-contact operation of automatic doors become more widespread, do you have any of the following concerns? ☑ Although we have introduced automatic doors, they remain open due to people crossing frequently in busy areas. ☑ We implemented touch switches to reduce unnecessary opening and closing, but we are concerned about hygiene. ☑ Touch switches require battery replacements regularly since they are powered. The light beam touch sensor "HA-T401" allows automatic doors to open and close without physical contact, and its compact detection range makes it suitable for narrow passages and high foot traffic areas, contributing to energy savings and infection control. 【Benefits of Implementation】 ○ Adaptable to various door types with four different spot settings, ideal for busy roads and narrow passages. ○ Energy-saving effect with two setting modes that reduce unnecessary opening and closing of automatic doors. ○ Equipped with a light beam touch function, allowing doors to open and close simply by waving a hand, ensuring hygiene. ◎ For more details, please download the catalog or contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.