We have published a technical column titled "Does the Handle Make the Difference? What Makes a Stainless Steel Container Easy to Use."

Eliminate the difficulties of "hard to wash" and "hard to hold"! Introducing handles that improve cleanliness and work efficiency.

A "handle" to grip when carrying a stainless steel container. Are you dissatisfied with how difficult it is to grip or clean? Isn't it easy for dirt and cleaning solution to accumulate in the gaps of the handle? The gaps in the handle and its attachment points tend to be hard to clean and can become unsanitary. To prevent contamination and foreign matter from the container, it is important to eliminate such hard-to-reach gaps. By removing the gaps, dirt and cleaning solution won't accumulate, which can shorten cleaning time. This, in turn, leads to improved work efficiency. Our company selects and manufactures the optimal "handle" based on your desired specifications, usage environment, and application, so that you can use stainless steel containers comfortably.

• Stainless steel container

This is a cap with an L-shaped handle. It has an easy-to-hold handle, so it won't fall off when removed.

○ The large-sized cap can be held with one hand. ○ It is easy to apply force when attaching and detaching, and can be easily removed even when in close contact with the cap. ○ It is suitable for use in areas that are prone to falling off, such as the sides and bottom. ○ The inner surface of the cap can be placed stably without making contact with the ground. ○ The liquid contact part is made of SUS316L, which has excellent corrosion resistance.

• Other machine elements

Stainless steel cart with handles for easy transport of containers. The cart is made entirely of stainless steel, and the wheels are made of nylon urethane, which is less likely to damage the floor.

This is a dedicated cart for straight containers (ST/CTH/CTB/STB/SMA/KTT/DT). The cart for transporting containers [KMS] has been equipped with a handle. It is a hand-pushed cart ideal for moving small or heavy containers. The handle is attached by welding, so it does not wobble. The casters are made of nylon urethane wheels that are less likely to damage the floor. The casters are equipped with stoppers to prevent movement. Custom modifications, such as changing the height of the handle, are possible.

• Trolley

Stainless steel cart with handles for easy transportation of containers.

This is a dedicated cart for straight containers (ST/CTH/CTB/STB/SMA/KTT/DT, etc.). The cart for transporting containers [KM] has been equipped with a handle. It is an ideal hand cart for moving small or heavy containers. The handle is attached by welding, so it does not wobble. To prevent movement, the casters are equipped with stoppers. Custom modifications, such as changing the height of the handle, are possible.

• Trolley

Stainless steel round universal container with a folding handle. It does not take up unnecessary space when arranging or storing containers.

○ The handle collapses when not in use, so it doesn't take up unnecessary space. ○ It is a convenient storage container for temporary storage and transportation of powders, liquids, etc. ○ It has a lid to prevent dust and other contaminants from entering. ○ The corners of the bottom have an R structure that makes it difficult for dirt to accumulate.

• Stainless steel utensils and containers

A round stainless steel container with a handle at the bottom for easy pouring of water and materials. It is a standard open type.

This is a round stainless steel tank with a handle for hanging. By gripping the handle at the bottom when emptying the contents, the container can be easily tilted. It comes with a cover to prevent dust and other contaminants from entering. The corners at the bottom have a rounded design that makes it difficult for dirt to accumulate.

• Stainless steel utensils and containers

A stainless steel container with a handle at the bottom for easy pouring of water and ingredients. The handle is a compact foldable type, and the container has a standard open design.

This is a round stainless steel container with a handle for hanging. You can easily tilt the container by grabbing the handle at the bottom when emptying its contents. The handle is foldable, so it doesn't take up space when placed down. It comes with a cover to prevent dust and other contaminants from entering. The corners of the bottom have an R structure that makes it difficult for dirt to accumulate.

• Stainless steel utensils and containers

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall