We have added a case study page for solving problems【Resolving "compressor-related troubles" such as failures due to drainage and pressure loss!】

No power supply needed. There are no wear-prone moving parts, and maintenance is minimal!

In hollow fiber membrane-based compressed air dehumidification, the membrane dryer "DRYPOINT M PLUS" solves issues such as wanting to reduce running costs. Customers who have adopted this product have praised it for being energy-efficient and not requiring electricity or moving parts, thus eliminating the need for daily maintenance. 【Overview】 ■Challenges - Need for low dew point dry air for a specific application - Desire to reduce running costs of dehumidification equipment ■Proposed Product - DRYPOINT M PLUS ■Benefits - No power supply required, no daily maintenance needed - Energy-saving *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment

For high-pressure line filters, there is minimal pressure loss and reduced running costs! 【Short delivery time / Low cost】

The line filter "CLEARPOINT 3eco" solves your problems, such as wanting to reduce running costs in the removal of water droplets and solid particles from compressed air. Customers who have adopted this product have praised it for being a high-pressure line filter with short delivery times and low costs. 【Overview】 ■Challenges - Want to reduce running costs - Unable to find a high-pressure product with short delivery times and low costs ■Proposed Product - CLEARPOINT 3eco ■Benefits - Low pressure loss and high filtration efficiency - Available in two types: 1.6MPa(g) model and 5MPa(g) model - Minimal pressure loss - Short delivery times and low costs *For more details, please refer to the PDF document or feel free to contact us.

• filter
• air conditioning

With the leak detector "METPOINT LKD," air leaks can be detected visually and audibly! It is compact and can measure in tight spaces as well.

The leak detector "METPOINT LKD" solves the problems caused by air leaks from piping and other sources during air leak detection. Customers who have adopted this product have praised its ability to confirm air leaks visually and audibly through a display and headphones, as well as its capability to measure in small and narrow spaces. 【Overview】 ■Issues - Air leaks from piping and other sources ■Proposed Product - METPOINT LKD ■Benefits - High precision and simplicity - Ability to confirm air leaks visually and audibly through a display and headphones - Can measure in small and narrow spaces *For more details, please refer to the PDF document or feel free to contact us.

• Leak Testing Equipment
• Other inspection equipment and devices

With an oil-water separation device, no power supply is needed, allowing for cost reduction! Installation and element replacement are also easy.

The oil-water separation device "OWAMAT" solves problems such as high industrial waste disposal costs in the treatment of drain water. Customers who have adopted our product have praised it for being convenient since it does not require a power supply. They have also noted that installation and element replacement can be easily performed. 【Overview】 ■Issues - High industrial waste disposal costs ■Proposed Product - OWAMAT ■Benefits - No power supply required, cost reduction - Easy installation and element replacement *For more details, please refer to the PDF document or feel free to contact us.

• Hazardous material processing
• Oil-water separator

With the electronic level control drain trap, significant reductions in CO2 emissions are expected, leading to energy-saving effects! The LED display panel allows for instant confirmation of emission status.

The electronic level control drain trap 'BEKOMAT' solves issues such as aerosols of compressed air that occur during the discharge of drain water. Customers who have adopted this product have praised it for its energy-saving effects due to significant reductions in CO2 emissions and the ability to instantly check discharge status via the LED display panel. 【Overview】 ■Issues - Aerosols of compressed air ■Proposed Product - BEKOMAT ■Benefits - Electronic level control, zero aerosols - Energy-saving effects due to significant reductions in CO2 emissions - Instant discharge status check via LED display panel *For more details, please refer to the PDF document or feel free to contact us.

• Hydraulic Equipment
• Wastewater/wastewater treatment equipment

Resolve "troubles around the compressor" such as failures due to drains and the occurrence of pressure loss!

Our company offers a lineup of "compressed air-related products and systems" that can process compressed air from compressors at low cost and efficiently. Products that help solve issues around compressors and compressed air systems include the "Drain Trap," which prevents air loss through electronic control discharge; the "Air Filter," which excels in filtration performance and energy efficiency; and the "Leak Detector," which can detect even slight leaks in a short time. You can view a comprehensive catalog featuring each product by clicking on "Download." 【Product Lineup (Excerpt)】 ◎ Drain Trap "BEKOMAT" Sensors detect the drain and automatically discharge it. Over 2 million units sold worldwide. ◎ Air Filter "CLEARPOINT" Ensures reliable filtration of oil and other substances with high adsorption performance. Also available in high-pressure specifications up to 50MPa. ◎ Leak Detector "METPOINT LKD" Detects ultrasonic waves to accurately and quickly identify air leaks. Easy to handle. *We can also provide demo units for you to experience firsthand. Please feel free to contact us if you are looking for compressed air-related equipment.

• Hydraulic Equipment
• Wastewater/wastewater treatment equipment

In civil engineering sites, in addition to construction feasibility and safety, material selection that takes environmental considerations into account is required. Materials used for temporary roads, access roads, heavy machinery work yards, and material storage areas are now focusing not only on traditional steel plates but also on materials that can contribute to reducing environmental impact. Hyper CLT sheets are civil engineering CLT materials made from wooden CLT. Because they utilize wood, they are characterized by their ability to easily connect to proposals that consider site environments, such as CO2 fixation, glare reduction, and noise reduction. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to handle even with small machinery, thus helping to reduce the burden of transportation, installation, and removal. Furthermore, they can be used in a wide range of applications as an alternative to steel plates for measures against muddy conditions, ground protection, and ensuring work pathways. In public works, they are also easy to propose as materials that demonstrate the adoption of environmentally friendly materials and ingenuity during construction, which can lead to improved site evaluations. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," they can also be utilized as materials for proposals on creativity and environmental measures in public works. We recommend them as a new alternative to steel plates for companies considering environmental considerations, NETIS, civil engineering utilization, and civil engineering CLT. Please feel free to consult us.

Hello everyone! We are Nikken Coating Industry Co., Ltd., a specialized manufacturer of contract processing for fluororesin coatings and PEEK coatings. Thank you very much for visiting our booth at the recent "Mechanical Elements Technology Exhibition." Thanks to you, we were able to conclude the event successfully. At the exhibition, we proposed surface treatment solutions for the "five challenges (release, sliding, corrosion resistance, impurity measures, and environmental response)" that arise in manufacturing sites. Were there any technologies that caught your interest? ■ We are currently responding to inquiries made at the venue We are sequentially contacting those who made technical inquiries or requests for prototypes at our booth on the day of the event. If you have requests such as "I would like you to look at additional drawings" or "I need a quote urgently," please feel free to let us know. ■ For those who could not attend the exhibition or missed our booth We also welcome inquiries from customers who could not come to the venue, such as "coating for special shapes that other companies have declined" or "switching from existing coatings." If you have any concerns regarding "surfaces," please feel free to consult or contact us.

The particle visualization technology developed under our brand "ViEST" has a very high level of detection sensitivity that allows for real-time visualization of the suspended and adhered states of micro and nano-sized particles. We are engaged in the sale of visualization systems and contract services for evaluation (investigating particles and airflow in production processes, manufacturing equipment, and factory environments, evaluating the performance of cleaning products, proposing yield improvement measures, etc.) both domestically and internationally. In manufacturing environments, invisible fine foreign substances, dust generation, particle adhesion due to static electricity, and airflow disturbances can lead to quality defects and reduced yield. Our company clarifies these contamination factors through visualization technology and provides consistent support from identifying the source of the problem to considering and confirming improvement measures. Do you have any of the following concerns? - Unable to identify the cause of foreign matter contamination - Want to check airflow and cleanliness in clean rooms - Want to understand dust generation from manufacturing equipment and transport systems - Want to reduce particle adhesion to films and substrates - Want to improve contamination that causes yield reduction

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without the application of heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.