◆◆Notice◆◆◆Regarding Product Deliveries Related to the G20 Summit◆◆◆

Extremely high holding capacity for the rebar position in the simple spray application formwork!

This is a glass stand type that uses four rebar bars for the Easy Shelf Method, which aims to create green slopes and disaster prevention. NETIS Registration Number: KK-160021-VE **Features of the Easy Shelf Method Power Stand:** 1. The punched steel plate structure is designed to be strong against deformation caused by external forces, demonstrating an extremely high holding capacity in relation to the specified rebar positions. 2. It can be stacked for easy transportation, enhancing work efficiency. **Features of the Easy Shelf Method Glass Stand:** 1. The glass stand, with its punched steel plate structure, is strong against deformation caused by external forces and exhibits an extremely high holding capacity in relation to the specified rebar positions. 2. The outer dimensions of the glass stand are designed to ensure that all parts maintain a cover of 40 mm, which helps reduce the occurrence of cracks after spraying. 3. The glass stand features numerous openings and cuts that eliminate mortar edge cutting, making it easy to bind and excellent in workability. The glass stand can be stacked, making it easy to transport.

• Other consumables
• others

It's called "Sanbo" because it's three bars! It's a simple spraying method framework using three rebar!

This is a type that uses three rebar for the Easy Shelf method of simple spray application frame construction. The Easy Shelf method is conducted under an association system, but if you are considering joining the association in the future, it is also possible to sell it in the form of a trial construction. NETIS Registration Number: KK-160021-VE 【Simple Spray Adhesive Frame - Easy Shelf Method Sanbo Type】 1. The punched steel plate structure is designed to be strong against deformation caused by external forces and exhibits an extremely high holding capacity against the specified rebar positions. 2. It can be stacked for transportation, improving work efficiency. For more details, please contact us or download the catalog.

• others

A simple spraying method framework that balances the creation of green slopes and disaster prevention! It has good workability and shortens the construction period compared to conventional spraying frameworks!

The "Easy Shelf Method" is a simple spraying framework designed for the creation of green slopes and disaster prevention. The framework is flexible and easy to construct, allowing for the preservation and restoration of green spaces. NETIS Number: KK-160021-VE Registered in Wakayama Prefecture Glass Stand Type A: R03-1235 Glass Stand Type B: R03-1236 Glass Stand Type Sanbo: R03-1237 【Features】 ■ Good workability and shortened construction period ■ Excellent flexibility ■ Increased resistance to surface erosion ■ Reverse construction is also possible ■ Economically advantageous ■ More reliable retention of rebar positions ■ Design of various frame spans is possible *Although it is an association system, trial construction is possible even for non-members, so please contact our sales staff for details. *For more information, please request materials or view the PDF data available for download.

• others

Due to its steel plate punching structure, it is strong against deformation caused by external forces and exhibits an extremely high holding capacity in relation to the rebar position! *It will be exhibited at the Wakayama Prefecture Ken Sanpin.

The "Easy Shelf Construction Method Sanbo Type" uses three rebar. It's called "Sanbo" because it has three bars. The Easy Shelf Construction Method Sanbo is designed with a punched steel plate structure, making it strong against deformation caused by external forces and demonstrating extremely high retention capability against the specified rebar positions. It can be stacked for easy transport, which also enhances work efficiency! NETIS Registration Number: KK-160021-VE ＊＊＊＊ Easy Shelf Construction Method Sanbo Type Registered Product in Wakayama Prefecture; Registration Number: R03-1237 *For more details, please refer to the PDF or contact us.

• Other consumables
• others

Less likely to clump! Short fibers for mortar spraying!

Easy Fiber for crack suppression reinforcement is a short fiber used for crack suppression and reinforcement in sprayed mortar. Its framework offers flexibility and workability, allowing for the preservation or restoration of green spaces through methods such as reinforced soil construction. For details on effectiveness and safety concerns, please contact us or download the catalog for more information.

• fiber
• others

For suppressing shrinkage cracks in sprayed mortar! Safe material made of polypropylene! Crack-suppressing short fibers that can be mixed with a mixer.

Crack-inhibiting polypropylene short fibers, Toughlight, are processed into bundles, making them less likely to scatter and less likely to pierce the skin. Furthermore, since polypropylene is the material used, no toxic gases are generated during combustion, making it a highly safe crack-inhibiting short fiber. 【Incorporation Effects】 ● Reduces scattering and collapse during spraying ● Reduces shrinkage cracks caused by temperature changes and drying during the curing period 【Excellent Workability】 ● Easily mixed with a conventional mixer ● Generates few fiber balls and has high degradability ● The flow value remains unchanged with the incorporation of Toughlight, maintaining fluidity ● During spraying operations, fibers do not pierce like needles due to rebound There are many other features as well! For more details, please contact us or download the catalog to view. 【Proposal: Weed Control through Reinforced Fiber Mixed Spraying】 At K.F., we propose "Weed Control Work through Mortar Reinforced Fiber Mixed Spraying." Please check the basic information section below for details.

• Other polymer materials
• others

Easy and low-cost crack prevention. It effectively suppresses breathing and demonstrates excellent results.

For the suppression of concrete cracking, please use Toughlight CP, a polypropylene fiber for concrete crack suppression. Features: 1. Easy mixing. Just add it directly from the bag and spin for three minutes at high speed. 2. Low cost. Can be installed for about 80 to 160 yen per square meter! *This is for a concrete thickness of 10 cm. 3. A reliable NETIS registered product. For more details, please contact us or download the catalog to view.

• fiber
• others

Non-absorbent fiber visibility rope for slope construction.

Due to the lack of water-absorbing fibers, there is no hardening of the rope from moisture absorption. There is no difference in strength elongation due to wet and dry conditions. Since it is a yellow rope, it has good visibility even in heavy snowfall areas, and because it uses non-water-absorbing fibers, the rope is less likely to freeze.

• Other consumables
• others

Event Date: October 7 (Wednesday) to October 9 (Friday), 2026 Time: 10:00 AM to 5:00 PM Venue: Intex Osaka Our company will be exhibiting at the 29th Monozukuri World Design and Manufacturing Solutions Exhibition, which will be held at Intex Osaka from October 7 (Wednesday) to October 9 (Friday), 2026. At the venue, we will showcase the upgraded "ReMacs Hybrid," as well as the eagerly awaited production management system for the precast concrete industry, "ReMacs TypePca," which will be unveiled for the first time following its release at the end of May! We will also display various solutions, including the newly equipped "AI Drawing Search System" with OCR functionality! We sincerely look forward to your visit.

In civil engineering sites, it is important to clearly communicate not only safety and workability but also "what kind of initiatives the site is undertaking." Hyper CLT mats are civil engineering mats that utilize wood CLT. They look significantly different from conventional steel plates, so when laid at site entrances, viewing routes, or material yards, they create a strong visual impact. In particular, during inspections by clients, site tours, and public open days for local residents, the use of wood, environmental considerations, and the application of new technologies can be conveyed in a "visible form." Additionally, they are lightweight and easy to install and remove, and they offer practical benefits such as reducing glare and metal noise, as well as CO2 fixation. Hyper CLT mats are registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." They combine wood, NETIS, civil engineering, and CLT, making them a new temporary material that can impressively convey the initiatives of the site.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.