Introduction of custom cases for draft chambers and exhaust hoods!

Achieving a safe and comfortable work environment with detailed innovations and ideas such as electrostatic curtains and guide rails!

This is an electrostatic roll curtain type exhaust hood. Since it is custom-made, it can be tailored to your desired size and application, ensuring a safe and comfortable working environment. 【Features】 ■ Detailed innovations such as electrostatic curtains and guide rails ■ Use of materials suited for various applications, including chemical resistance, UV cut, and darkroom specifications ■ Adoption of exhaust methods according to the nature of the gases generated (top exhaust and rear exhaust) *Please refer to the PDF data of the product catalog for "Custom-made Clean Benches and Exhaust Hoods" available for download.

• Clean bench
• Other clean room equipment and facilities

Due to the standard aluminum frame specifications, we can accommodate custom sizes.

We use our original molded aluminum frame, allowing for a high degree of freedom in design and manufacturing, including the size and specifications of the main body as well as the frame. *VOC (volatile organic compounds) measures are also possible. ■The roller curtain can be adjusted to the desired height.

• Other physicochemical equipment

Achieve a safe and comfortable working environment with localized cleaning! Fully customized clean benches and exhaust hoods.

Custom clean benches and exhaust hoods are fully tailored to your desired size. They create a safe and comfortable working environment through localized clean air solutions. They contribute to preventing foreign substance contamination, improving experimental accuracy, and enhancing the working environment! 【Features】 ■ Fully customized to your desired size ■ Uses materials suited for various applications, such as chemical resistance, UV protection, and darkroom specifications ■ Accommodates requests for positive and negative pressure airflow control, as well as temperature and humidity control *Please refer to the product catalog for "Custom Clean Benches and Exhaust Hoods" available for download in PDF format.

• Clean bench
• Other clean room equipment and facilities

We accept fully customized orders. We provide products made from materials such as stainless steel and PVC, tailored to your needs.

● This is a draft chamber with excellent durability and chemical resistance. ● It collects solvents that have evaporated using a scrubber. ● By consolidating the control panel at the front, it takes work efficiency and safety into consideration.

• Other physicochemical equipment
• Testing Equipment and Devices
• Draft chamber

We accept fully customized orders. We provide products made from materials such as stainless steel and PVC, tailored to your needs.

●This is a large PVC draft chamber with excellent durability and chemical resistance. ●The exhaust volume can be adjusted with a sliding damper. ●By consolidating the control panel at the front, it takes into consideration work efficiency and safety.

• Other physicochemical equipment
• Testing Equipment and Devices
• Draft chamber

We accept fully customized orders. We provide products made from materials such as stainless steel and PVC, tailored to your needs.

● This is a stainless steel draft chamber with excellent corrosion resistance, organic solvent resistance, and heat resistance. ● It is also possible to incorporate dry air and nitrogen gas piping, as well as leak detectors. ● By consolidating the control panel at the front, it takes into account work efficiency and safety.

• Other physicochemical equipment
• Testing Equipment and Devices
• Draft chamber

We accept fully customized orders. We provide products made from materials such as stainless steel and PVC, tailored to your needs.

● This is a stainless steel draft chamber with excellent corrosion resistance, organic solvent resistance, and heat resistance. ● It is also possible to incorporate dry air and nitrogen gas piping, as well as leak detectors. ● By consolidating the control panel at the front, it takes work efficiency and safety into consideration.

• Other physicochemical equipment
• Testing Equipment and Devices
• Draft chamber

Compact and lightweight, making it easy to carry!

● It is a tabletop mini draft that can exhaust only the area in front during work. ● It is compact and lightweight, making it easy to carry.

• Other physicochemical equipment

A two-part type designed for installation and movement. The inside of the scrubber is visible, allowing for confirmation of the cleaning status.

A draft chamber is a device for safely exhausting harmful gases when they are generated or when handling volatile hazardous substances. It is made of stainless steel and PVC materials, offering excellent resistance to organic solvents and corrosion. We have a range of sizes, from large box-shaped units with plumbing for water and gas to tabletop models, catering to all needs. The steel draft chamber with scrubber, DT-SC-1800, exhausts gas through a cleaning solution, filler material, and eliminator, improving cleaning efficiency. The interior of the scrubber is visible, allowing for monitoring of the cleaning condition. It is designed in a two-part type for easy installation and mobility. For more details, please contact us or refer to the catalog.

• Draft chamber
• Other clean room equipment and facilities

This is a large draft chamber made of PVC, excellent in durability and chemical resistance.

A draft chamber is a device used for safely exhausting harmful gases when they are generated or when handling volatile hazardous substances. It is made of stainless steel and PVC materials, offering excellent resistance to organic solvents and corrosion. We have a range of sizes, from large box-shaped units with plumbing for water and gas to tabletop models, catering to all needs. The PVC draft chamber DFP-900A is made of PVC and has excellent chemical resistance. It features a perforated work surface that allows for washing operations. Inside the draft chamber, a sliding damper is installed vertically, allowing for differentiation based on the type of gas being used. For more details, please contact us or refer to the catalog.

• Draft chamber

This is a large draft chamber made of PVC, excellent in durability and chemical resistance.

A draft chamber is a device used for safely exhausting harmful gases when they are generated or when handling volatile harmful substances. It is made of stainless steel and PVC materials, which provide excellent resistance to organic solvents and corrosion. We offer a range of sizes, from large box-shaped units with plumbing for water and gas to tabletop models, catering to all needs. The PVC cleaning draft DFP-1800 is a large cleaning draft with acid resistance. The main frame is reinforced with steel square pipes wrapped in PVC, providing excellent durability and acid resistance. For more details, please contact us or refer to the catalog.

• Draft chamber

In civil engineering sites, in addition to construction feasibility and safety, material selection that takes environmental considerations into account is required. Materials used for temporary roads, access roads, heavy machinery work yards, and material storage areas are now focusing not only on traditional steel plates but also on materials that can contribute to reducing environmental impact. Hyper CLT sheets are civil engineering CLT materials made from wooden CLT. Because they utilize wood, they are characterized by their ability to easily connect to proposals that consider site environments, such as CO2 fixation, glare reduction, and noise reduction. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to handle even with small machinery, thus helping to reduce the burden of transportation, installation, and removal. Furthermore, they can be used in a wide range of applications as an alternative to steel plates for measures against muddy conditions, ground protection, and ensuring work pathways. In public works, they are also easy to propose as materials that demonstrate the adoption of environmentally friendly materials and ingenuity during construction, which can lead to improved site evaluations. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," they can also be utilized as materials for proposals on creativity and environmental measures in public works. We recommend them as a new alternative to steel plates for companies considering environmental considerations, NETIS, civil engineering utilization, and civil engineering CLT. Please feel free to consult us.

Hello everyone! We are Nikken Coating Industry Co., Ltd., a specialized manufacturer of contract processing for fluororesin coatings and PEEK coatings. Thank you very much for visiting our booth at the recent "Mechanical Elements Technology Exhibition." Thanks to you, we were able to conclude the event successfully. At the exhibition, we proposed surface treatment solutions for the "five challenges (release, sliding, corrosion resistance, impurity measures, and environmental response)" that arise in manufacturing sites. Were there any technologies that caught your interest? ■ We are currently responding to inquiries made at the venue We are sequentially contacting those who made technical inquiries or requests for prototypes at our booth on the day of the event. If you have requests such as "I would like you to look at additional drawings" or "I need a quote urgently," please feel free to let us know. ■ For those who could not attend the exhibition or missed our booth We also welcome inquiries from customers who could not come to the venue, such as "coating for special shapes that other companies have declined" or "switching from existing coatings." If you have any concerns regarding "surfaces," please feel free to consult or contact us.

The particle visualization technology developed under our brand "ViEST" has a very high level of detection sensitivity that allows for real-time visualization of the suspended and adhered states of micro and nano-sized particles. We are engaged in the sale of visualization systems and contract services for evaluation (investigating particles and airflow in production processes, manufacturing equipment, and factory environments, evaluating the performance of cleaning products, proposing yield improvement measures, etc.) both domestically and internationally. In manufacturing environments, invisible fine foreign substances, dust generation, particle adhesion due to static electricity, and airflow disturbances can lead to quality defects and reduced yield. Our company clarifies these contamination factors through visualization technology and provides consistent support from identifying the source of the problem to considering and confirming improvement measures. Do you have any of the following concerns? - Unable to identify the cause of foreign matter contamination - Want to check airflow and cleanliness in clean rooms - Want to understand dust generation from manufacturing equipment and transport systems - Want to reduce particle adhesion to films and substrates - Want to improve contamination that causes yield reduction

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without the application of heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.