★★Update★★★ The comparison table has been updated. Reinforcing fibers and safety nets★★★

On-site, the safety of workers is paramount! We propose a safety net for slopes that can be easily installed on standing trees!

At K.F., we propose the safety net "An'ei Net" to protect important workers from falling objects. The Ministry of Health, Labour and Welfare has revised the safety and health regulations, and Article 539-5 includes "Work Plans." This requires conducting and recording an investigation of the work site, creating a work plan based on that, and informing and carrying out the work with the relevant workers. Within this "Work Plan," there are measures to prevent dangers to workers from falling objects, and in the "Investigation and Record" section, there is an item regarding "the work area and below it..." Are measures being taken in your work environment to protect important workers from falling objects? 【Features】 ■ The flexibility of high-strength raschel knitted fabric and the effectiveness of high-strength, high-elasticity rope absorb a wide range of falling rock energy (maximum falling rock energy 100kJ) ■ Easily installed on standing trees ■ High shock absorption performance of the net and rope reduces the load acting on the supports ■ Components are compact, making them easy to transport and install ■ Can be reused if there are no significant injuries *For more details, please refer to the PDF document or feel free to contact us.

• others

Are measures in place to protect important workers from falling objects in the work environment? The components are compact, easy to carry and install, and easy to introduce!

The Ministry of Health, Labour and Welfare has revised the safety and health regulations, and Article 539-5 states that there should be a "work plan." This involves conducting a survey of the work site, recording the findings, creating a work plan based on that information, and informing the relevant workers to carry out the work accordingly. Are measures being taken in your work environment to protect important workers from falling objects? Our company proposes the slope safety net "An'ei Net." 【Features】 - Absorbs falling rock energy due to the flexibility of high-strength raschel knitted fabric and the effectiveness of high-strength, high-elasticity ropes. - Easily installable on standing trees. - Components are compact, making transportation and installation easy. - Reusable if there are no significant external damages. *For more details, please contact us or download the PDF.

• others

It is a polypropylene fiber for mortar reinforcement that excels in workability and chemical resistance.

For crack suppression in slope construction! NETIS registration number: KT-100021-VE. ■ Lightweight and excellent workability. With a density of 0.91g/cm3, it is light and easy to transport and mix. ■ Excellent chemical resistance and rust-free. It has superior alkali resistance and durability. ■ Adhesion to concrete. Embossed processing and hydrophilic treatment improve adhesion and enhance bending toughness. ■ Environmentally friendly. It does not produce dioxins (chlorine gas) when burned. 【Proposal: Weed prevention using reinforced fiber mixed spraying】 At K-F, we propose "weed prevention work using mortar reinforced fiber mixed spraying." Mortar reinforced fiber mixed spraying involves mixing polypropylene fibers for mortar reinforcement, "Balchip MK," with crack suppression polypropylene short fibers, Toughlight RG, and spraying them to further reduce the crack occurrence rate in mortar structures, thereby enhancing durability and reducing lifecycle costs. By performing reinforced fiber mixed spraying on slopes, such as at the base of the slope, more lasting weed prevention effects can be expected.

• others

Project duration and cost reduction possible! This is a lightweight mortar reinforcement fiber that is easy to transport and add compared to steel fibers.

Keif handles products such as polypropylene fibers and vinylon fibers, which are compatible with concrete. "Mortar reinforcement fibers" have good adhesion to cement, making it difficult for cracks to form, and if cracks do occur, they help suppress their growth. The binding force of the mortar reinforcement fibers reduces the weakening of the structure during freezing, improves freeze-thaw resistance, and enhances long-term durability. 【Advantages of Reinforcement Fibers】 ■ In surface work, the lath application can be omitted, reducing construction time and costs. ■ Compared to steel fibers, they are lightweight, making transportation and addition easier. ■ Being organic fibers, they do not rust and maintain aesthetic appeal. 【Expected Application Scenarios】 ■ Sprayed concrete (surface work, tunnels) ■ Secondary lining ■ Painting work, etc. 【Products Handled】 ■ Kratec ■ Valtip MK, etc. *For more details, please refer to the PDF titled "A Must-See for Surface Work Contractors! Comparison Table of Mortar Reinforcement Fiber Method and Conventional Methods."

• fiber
• others

For suppressing shrinkage cracks in sprayed mortar! Safe material made of polypropylene! Crack-suppressing short fibers that can be mixed with a mixer.

Crack-inhibiting polypropylene short fibers, Toughlight, are processed into bundles, making them less likely to scatter and less likely to pierce the skin. Furthermore, since polypropylene is the material used, no toxic gases are generated during combustion, making it a highly safe crack-inhibiting short fiber. 【Incorporation Effects】 ● Reduces scattering and collapse during spraying ● Reduces shrinkage cracks caused by temperature changes and drying during the curing period 【Excellent Workability】 ● Easily mixed with a conventional mixer ● Generates few fiber balls and has high degradability ● The flow value remains unchanged with the incorporation of Toughlight, maintaining fluidity ● During spraying operations, fibers do not pierce like needles due to rebound There are many other features as well! For more details, please contact us or download the catalog to view. 【Proposal: Weed Control through Reinforced Fiber Mixed Spraying】 At K.F., we propose "Weed Control Work through Mortar Reinforced Fiber Mixed Spraying." Please check the basic information section below for details.

• Other polymer materials
• others

Easy and low-cost crack prevention. It effectively suppresses breathing and demonstrates excellent results.

For the suppression of concrete cracking, please use Toughlight CP, a polypropylene fiber for concrete crack suppression. Features: 1. Easy mixing. Just add it directly from the bag and spin for three minutes at high speed. 2. Low cost. Can be installed for about 80 to 160 yen per square meter! *This is for a concrete thickness of 10 cm. 3. A reliable NETIS registered product. For more details, please contact us or download the catalog to view.

• fiber
• others

Less likely to clump! Short fibers for mortar spraying!

Easy Fiber for crack suppression reinforcement is a short fiber used for crack suppression and reinforcement in sprayed mortar. Its framework offers flexibility and workability, allowing for the preservation or restoration of green spaces through methods such as reinforced soil construction. For details on effectiveness and safety concerns, please contact us or download the catalog for more information.

• fiber
• others

Prevent cracks in slope construction! Safe! Easy! Shortened construction period!

NETIS Registration Number: CG-070010-A "Kuratec" is a vinyl fiber for reinforcing mortar on slopes. By adding "Kuratec," it is possible to shorten the construction period by cutting out the lathing process depending on the site conditions, which in turn achieves cost reduction. Additionally, it has good adhesion to cement, making it less prone to cracking, and if cracks do occur, it suppresses their growth. Furthermore, since the quality of the mortar improves, it is also possible to reduce the thickness of the spray application. For more details, please contact us or download the catalog to view.

• fiber
• Other polymer materials
• others

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.