Introduction of custom cases for desiccators!

Each room is independent, and there is no impact on other rooms from the opening and closing of doors.

The gas replacement independent desiccator N-1804C/CX and N-1802C/CX is a storage unit for N2 purging. Each chamber is independent, and there is no impact on other chambers when the doors are opened or closed. The doors are equipped with magnetic gaskets for high airtightness and ease of use. The flow meter has a range of 0 to 5 liters/min with a valve and independent piping. Additionally, the CX type comes with a joint for a φ6 tube, and the gas sealing valve has a connection diameter of φ8. For more details, please contact us or refer to the catalog.

• Dehumidifier

There is no waste because the N2 flow rate is controlled by a timer during the opening and closing of the door.

The N2 gas control desiccator NC-780C/NC-360C has no waste as it controls the N2 flow rate with a timer during door opening and closing. The door features a magnetic packing type, ensuring high airtightness and ease of use. The flow meter is equipped with a flow adjustment valve for 0 to 5 liters/min. The gas IN side has a joint for a φ6 tube, and the timer is set for 0 to 30 minutes, which is the N2 supply time when the door is closed. N2 control is OFF when the door is open and ON when it is closed. For more details, please contact us or refer to the catalog.

• Dehumidifier

Transport products while keeping them in a dehumidified storage! Wagon desiccator!

▼ Products that require dehumidifying and drying conditions can be transferred and transported. It is also suitable for transporting products from clean rooms. ▼ The shelves are equipped with slide rails, allowing them to be fixed at any position, making effective use of space. ▼ You can choose the specifications for the doors. MK: Magnetic packing type HK: Sealed handle type ▼ Depending on the specifications, a top panel can be installed.

• Drying Equipment

Large capacity for storage! Excellent functionality!

This is a desiccator that has been meticulously designed with a focus on airtightness, operability, and safety, thanks to our unique technology and know-how that developed the first aluminum frame plastic desiccator in the country. You can choose the specifications of the door. MK: Magnetic packing type PK: Snap lock type We also offer a wide range of accessories, including additional shelves, slide rails, hygrometers, and earthquake-resistant door locks. Please feel free to contact us.

• Dehumidifier

Large capacity for storage! Excellent functionality!

This is a desiccator that has been meticulously designed with a focus on airtightness, operability, and safety, thanks to our unique technology and know-how that developed the first aluminum frame plastic desiccator in the country. You can choose the specifications for the door. MK: Magnetic packing type HK: Sealed handle type We also offer a wide range of accessories, including additional shelves, slide rails, thermohygrometers, and earthquake-resistant door locks. Please feel free to contact us.

• Dehumidifier

The dehumidifying capability has been enhanced. It is suitable for low humidity with a setting value of 10% RH to the surrounding humidity.

▼ This is a desiccator that has been meticulously designed with a focus on airtightness, operability, and safety, developed with unique technology and know-how as the first aluminum frame plastic desiccator in the country. ▼ Equipped with a powerful dehumidifier DEHUMER that can handle door opening and closing as well as large storage. It operates on a forced convection system, controlling the opening and closing of the intake and exhaust valves inside the chamber. After reaching the set humidity, it performs ON-OFF control using a semiconductor sensor. ▼ You can choose the specifications of the door. MK: Magnetic packing type HK: Sealed handle type ▼ We also offer a wide range of accessories, including additional shelves, slide rails, hygrometers, and earthquake-resistant door locks. Please feel free to contact us.

• Dehumidifier

A large vacuum desiccator capable of accommodating various tests and research!

You can use it for the following tests and research: ▼ Vacuum forming degassing device ▼ Storage of chemicals and products that are sensitive to general air environments such as oxygen and carbon dioxide We can accommodate various specifications such as size, material, power supply, and stirrer installation. Please feel free to contact us!

• Drying Equipment

Medium-sized vacuum desiccator capable of accommodating various tests and research.

● This is a medium-sized vacuum desiccator with a capacity of 30L. ● There is an outlet inside the chamber, so power can be used. ● Operations such as degassing and defoaming can be performed while stirring with a stirrer. We can accommodate various specifications such as size and material. Please feel free to contact us!

• Drying Equipment

A small vacuum desiccator capable of accommodating various tests and research.

● This is a small vacuum desiccator with a capacity of 12L. ● There is an outlet inside the chamber, so electricity can be used. ● Operations such as degassing and defoaming can be performed while stirring with a stirrer. We can accommodate various specifications such as size and material. Please feel free to contact us!

• Drying Equipment

This is a desiccator that allows for vacuum degassing operations using a stirring atmosphere.

● This is a medium-sized vacuum desiccator with a capacity of 30L. ● A stir bar can be installed inside the chamber, allowing the use of a stirrer. ● Operations such as degassing and defoaming can be performed while stirring. We can accommodate various specifications, including size and material. Please feel free to contact us!

• Drying Equipment

A compact vacuum desiccator capable of handling various tests and research!

● This is a small vacuum desiccator with a capacity of 12L. ● A stir bar can be placed inside, allowing the use of a stirrer. ● Operations such as degassing and defoaming can be performed while stirring. We can accommodate various specifications such as size and material. Please feel free to contact us!

• Drying Equipment

It is a small vacuum desiccator with a lid that opens upwards.

This is a small vacuum desiccator with a capacity of 12L. The lid opens upwards. It can be used for tests and research such as: ▼ Defoaming device for vacuum molding ▼ Storage of chemicals and products that dislike general air environments such as oxygen and carbon dioxide We can accommodate various specifications including size, material, power supply, and stirrer installation. Please feel free to contact us!

• Drying Equipment

A compact vacuum desiccator capable of accommodating various tests and research!

● This is a small vacuum desiccator with a capacity of 7L. ● It has a lid that opens from the top. It can be used for tests and research such as the following: ▼ Defoaming device for vacuum molding ▼ Storage of chemicals and products that are sensitive to general air environments like oxygen and carbon dioxide We can accommodate various specifications including size, material, power supply, and stirrer installation. Please feel free to contact us!

• Drying Equipment

A compact vacuum desiccator capable of accommodating various tests and research!

You can use it for the following tests and research. ▼ Vacuum forming de-airing device ▼ Storage of chemicals and products that are sensitive to general air environments such as oxygen and carbon dioxide We can accommodate various specifications such as size, material, power supply, and stirrer installation. Please feel free to contact us!

• Drying Equipment

A medium-sized vacuum desiccator capable of accommodating various tests and research!

You can use it for the following tests and research. ▼ Vacuum forming degassing device ▼ Storage of chemicals and products that are sensitive to general air environments such as oxygen and carbon dioxide We can accommodate various specifications such as size, material, power supply, and stirrer installation. Please feel free to contact us!

• Drying Equipment

It is a stainless steel vacuum desiccator with excellent durability and corrosion resistance.

This product is made of stainless steel with bending processing, focusing on durability. The front window is made of transparent acrylic, allowing visibility into the interior.

• Vacuum Equipment

It is a stainless steel vacuum desiccator with excellent durability and corrosion resistance.

This is a durable product made of bent stainless steel. The front window is made of transparent acrylic, allowing you to see inside.

• Deaeration device

A large vacuum desiccator capable of accommodating various tests and research!

You can use it for the following tests and research. ▼ Vacuum forming de-airing device ▼ Storage of chemicals and products that are sensitive to general air environments such as oxygen and carbon dioxide We can accommodate various specifications such as size, material, power supply, and stirrer installation. Please feel free to contact us!

• Drying Equipment

This is a desiccator made of yellow acrylic.

This is a desiccator made of yellow acrylic. It protects stored items from deterioration due to ultraviolet rays. Our company offers fully customized desiccators, including gas replacement, vacuum, and clean specifications.

• Drying Equipment
• Other physicochemical equipment
• Dehumidifier

Large desiccator for storing 8-inch wafers!

It is a large desiccator for storing 8-inch wafers. We offer fully customized desiccators, including gas replacement, vacuum, and clean specifications.

• Drying Equipment
• Other physicochemical equipment
• Dehumidifier

A large desiccator with a capacity of 780L that performs dehumidification using a membrane blend dryer!

This is a desiccator that has been meticulously designed with a focus on airtightness, operability, and safety, thanks to our unique technology and know-how that developed the first aluminum frame plastic desiccator in the country. This desiccator is equipped with a membrane dryer that dehumidifies by passing compressed air through a hollow fiber membrane. ● It is a large desiccator with a capacity of 780L. ● It is a type that performs dehumidification using a membrane dryer. ● It can handle low humidity levels of 20% or less. ● The door features a magnetic packing system for easy opening and closing. ● Compressed air is required separately. We also offer a wide range of accessories, including additional shelves, slide rails, hygrometers, and earthquake-resistant door locks. Please feel free to contact us.

• Dehumidifier

A small stainless steel desiccator with excellent chemical resistance, durability, and static electricity prevention.

The stainless steel desiccator S-40 is a compact desiccator made of stainless steel, featuring excellent chemical resistance, durability, and static electricity prevention. The door is equipped with a snap lock, the body material is SUS430, and the window material is transparent acrylic. The shelf load capacity is 20 kg evenly distributed, and it includes one silica gel container made of SUS430 with a volume of 40L. For more details, please contact us or refer to the catalog.

• Dehumidifier

We accept fully customized desiccators.

This is a large acrylic vacuum desiccator. Our company offers fully customized desiccators, including gas replacement, vacuum, and clean specifications.

• Drying Equipment
• Other physicochemical equipment
• Dehumidifier

We accept fully customized desiccators.

This is a large vacuum desiccator made from a material that cuts ultraviolet rays. Our company offers fully customized desiccators, including gas replacement, vacuum, and clean specifications.

• Drying Equipment
• Other physicochemical equipment
• Dehumidifier

We accept fully customized desiccators.

The shelf material is SUS430, and the surrounding panels are anti-static PVC sheets. Our company offers fully customized desiccators, including gas replacement, vacuum, and clean specifications.

• Drying Equipment
• Other physicochemical equipment
• Dehumidifier

We accept fully customized desiccators.

This is a gas replacement desiccator made of stainless steel, emphasizing high airtightness. Our company offers fully customized desiccators, including gas replacement, vacuum, and clean specifications.

• Drying Equipment
• Other physicochemical equipment
• Dehumidifier

We accept fully customized desiccators.

By making all five rooms independent gas pathways, we minimized the impact of gas environment changes caused by door openings and closings. Additionally, the flow rate of the enclosed gas can be automatically controlled by sensors. Our company offers fully customized desiccators, including gas replacement, vacuum, and clean specifications.

• Drying Equipment
• Other physicochemical equipment
• Dehumidifier

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.