[Tokyo Event: For 3 Days Starting Tomorrow] Cool, Transport, Blow Away! We will hold the 2nd Sanwa Pneumatic Equipment Special Exhibition.

A compact spot cooler that generates ultra-low temperature air with a maximum temperature difference of -75°C just by connecting compressed air.

The Kolder is a simplified spot cooler that applies the principle of vortex. Without using a power supply or refrigerant gas, it discharges ultra-low temperature air with a maximum temperature difference of -75°C (at a supply pressure of 0.7 MPa, in the case of model 190-75SV) simply by connecting compressed air. A typical application of the generated cooling air is the removal of heat generated during the processing of materials such as metals and plastics, and it demonstrates excellent effectiveness, especially in the processing of hard materials and high-viscosity substances (such as titanium alloys, stainless steel, nickel alloys, and thermoplastic plastics). Additionally, the cooling effect on workpieces and tools leads to improved cutting speeds and extended tool life, making it particularly suitable for dry cutting of magnesium alloys. Furthermore, it is effectively utilized as a cooling source for various spot cooling applications, including preventing heat-related issues in electrical control boxes and various measuring instrument boxes, cooling molds, and cooling tests for semiconductors and PC boards. *For more details, please refer to the basic information and downloadable materials at the bottom of the page.

• Pneumatic Equipment

No power supply needed. This is a cabinet cooling (heat dissipation) dedicated spot cooler that operates solely on compressed air.

The "cabinet cooler" reduces overheating inside NC or CNC cabinets, electrical control panels, motor boxes, surveillance cameras, various measuring instruments, etc., protecting precision machinery and measuring instruments from malfunction or damage due to overheating. Additionally, the automatic exhaust mechanism of the cabinet cooler keeps the inside of the cabinet in a pressurized state with cooling air at all times, preventing the intrusion of dust and mist from outside the cabinet and protecting electronic devices from contamination. By using a thermostat and solenoid valve, it is possible to regulate the temperature inside the box and reduce the amount of compressed air consumed.

• Other environmental equipment

The Coanda effect generates a thin, uniform curtain-like laminar flow. Its applications are diverse, including drainage, drying, heat dissipation blowing, and cooling.

The "Line Blow" is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions for tasks such as draining, drying, and blowing away. ◆ Are you having trouble selecting piping components? ◆ >>> Product selection is available at the Satellite Showroom <<< In April 2018, we opened a Satellite Showroom in Odaiba displaying approximately 2,500 items as a new initiative to improve customer satisfaction in industrial piping components. [See]・[Touch]・[Sit]・[Choose] Our specialized staff will assist you in product selection. Please feel free to contact us. For those coming by train: Get off at Yurikamome "Telecom Center" Station and walk about 2 minutes. 【Contact Information】 TEL: 048-871-0501 Satellite Showroom Weekdays: Monday to Friday 10:00 AM to 5:00 PM

• Hydraulic Equipment

Suction and blow, two functions in one device. It is a tool that enables powerful vacuuming and blowing.

The air amplification air blow nozzle "Round Blow" uses compressed air as its power source, sucking in a large amount of surrounding air and expelling it. The "Round Blow" can be used in two roles: as a vacuum system or as a powerful air blow device.

• nozzle

This is a tool designed for blowing around pipes and cables. The air flow that blows out evenly at 360° enables drainage, cleaning, and drying.

The cylindrical airflow generator "Circle Blow" is an air nozzle that emits a cylindrical stream of air at high speed from a thin slit, attracting and amplifying a large amount of surrounding air to create a powerful annular amplification flow. The amplified flow, which blows evenly and uniformly in 360°, is effective for draining, cleaning, drying, and cooling long products such as pipes, cables, and extrusion rods. The hole diameter ranges from 25mm to 180mm.

• Pneumatic Equipment

It is small enough to fit in the palm of your hand, yet capable of powerful vacuuming and blowing.

The jet blower is a palm-sized air volume amplifier that generates a powerful vacuum pressure by blowing compressed air from slits provided along the inner wall of the main body, attracting a large amount of surrounding air from one side while expelling a large volume of amplified air from the other side. With a duct hose, it can be used for dust collection and recovery of debris, smoke, and particulate or fibrous materials, as well as for pneumatic conveying. Without a duct hose, it can be used for draining water after cleaning products or parts, as well as for drying, cooling, and blowing away cutting chips and debris.

• Pneumatic Equipment

It was manufactured for the purpose of air transportation using compressed air. During operation, it does not require a power supply, making it suitable for use in explosive environments.

The conveyor back is a device that enables air transport through a powerful vacuum pressure generated by compressed air as the power source. It has no moving parts and does not require a power supply, making it effective in environments where explosion-proof measures are required, as well as for the transport and exhaust of gas and mist.

• Pneumatic Equipment

No tools needed, anyone can freely position it.

The "Stay Hose" is a hose for blow nozzles that allows for free positioning without the use of tools. It is an ideal product for precise positioning of blow nozzles on the worksite, as it enables "bending, returning, and holding" without the need for tools.

• hose

"Blow," "drain," "dry" - spot blow with amplified air.

This is a blow nozzle that ranges from air volume amplification type to high thrust type. Air volume focused type Equivalent to direct injection into pipes with a diameter of 2 to 4 mm Material: Made of aluminum, stainless steel Thrust focused type Equivalent to direct injection into pipes with a diameter of 2 to 4 mm Material: Made of stainless steel

• nozzle

Cool it! Blow it away! Send it! Sanwa pneumatic equipment is an air tool that enables cooling, blowing, drying, and transfer simply by connecting compressed air.

The compact and easy-to-operate Sanwa pneumatic equipment, including the ultra-low temperature air generator "Kolder," which boasts nearly 40 years of experience, contributes to environmental improvement and productivity enhancement in various manufacturing sites.

• Pneumatic Equipment

In this 5S seminar, we won't just stop at "organizing and tidying up." We will provide plenty of tips on how to utilize 5S as a "visualization of work" and a "tool for discovering waste," evolving the workplace into a more comfortable and productive environment! ✅ Improvement tips you can use starting tomorrow ✅ Engaging and practical exercises and workshops that will inspire and excite you From "doing it because I was told to" to "wanting to take action myself" Your step forward will lead to the evolution of the entire team. This is an opportunity to cultivate a "mindset for improvement" among young employees and enhance the autonomy of the entire organization. From "waiting for instructions" to "thinking and taking action" As you become more accustomed to your work, you will notice the waste and potential that exists. Now, let's gain the "power to change" with 5S! Benefits of 5S: 1. People grow 2. Time becomes more abundant 3. The workplace environment improves 4. 5S does not require significant costs 5. It can be implemented regardless of company size or job type 6. It is appreciated by stakeholders We will teach you the tips to transform 5S from something done because a superior said to do it, or only when there is time, into an enjoyable and sustainable practice. *For more details, please download the PDF or contact us.

Our company will be exhibiting at the "Fukushima Tech Create 2026 Results Presentation" held in Okuma Town, Fukushima Prefecture. At this event, promising startups aiming for entrepreneurship and technological development in areas such as Hamadori, Fukushima Prefecture, will present their research and business results. ★ Participating Industry Fields Decommissioning / Robotics and Drones / Energy, Environment, and Recycling Agriculture, Forestry, and Fisheries / Medical-related / Aerospace On the 29th (Thursday), a talk event featuring notable figures and local entrepreneurs will also be held. A collection of attention-grabbing technologies that will shape the future will be gathered, so please feel free to stop by the IIDA booth when you visit. [Limited Company Iida Seisakusho Fukushima No. 2 Factory] 〒969-1204 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-64-2320 FAX: 0243-64-2571

Ito Corporation will be exhibiting at "CPhI Japan" held at Tokyo Big Sight. CPhI Japan (International Pharmaceutical Development Exhibition) is one of the largest international exhibitions in Japan, covering the entire supply chain of the pharmaceutical industry, from new drug development and generic drugs to biopharmaceuticals, manufacturing, and packaging. We will be showcasing the "Gloves for Glove Boxes/Isolators" manufactured by Tron Power. We look forward to your visit.

In this seminar, we will explain how to organize requirements for the introduction of mcframe, incorporating perspectives unique to the manufacturing industry. We will provide practical tips useful for business, such as balancing the application of standard package functions with add-ons and customizations, and a practical approach to prioritization. <Program> - Introduction - Learning from failure cases: "Pitfalls" of core system renewal and their countermeasures - The first step towards core system renewal: Organizing requirements <Recommended for> - Those who are exploring what to start with for DX - Business owners and managers in the manufacturing industry, and those responsible for management innovation - System personnel interested in the future of core systems *We may refuse applications from competitors in the same industry or those not eligible to participate.

Ito Corporation will be exhibiting at "INTERPHEX Week Tokyo" held at Makuhari Messe. This exhibition is the largest in Japan, showcasing a wide range of products and services related to the research and manufacturing of pharmaceuticals, cosmetics, and regenerative medicine from 25 countries and regions around the world. Pharmaceutical and cosmetic manufacturers, as well as regenerative medicine companies, will be attending from all over the globe. We will be showcasing "Gloves for Glove Boxes/Isolators" manufactured by Tron Power. We look forward to your visit.