We will exhibit at Mechatrotech Japan 2019 (October 23 to October 26) ■■■ Cutting power meters, etc.

New product released in August 2017! It is a charge amplifier for multi-component force measurement with built-in AD conversion functionality!

The LabAmp model 5167Ax1 is an excellent charge amplifier for multi-component force measurement and also a device that directly outputs digitized measurement values to a host computer for analysis. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Direct connection to the dynamometer: Fischer plug • Connection to evaluation software DynoWare model 2825A • Processes up to 100kSps per channel with 24-bit resolution • Processes continuous digital signals with minimal delay • Flexible low-pass, high-pass, and notch filter adjustments • Low noise specifications • Flexible scaling of 4 or 8-channel analog outputs • Status display via LED • Configuration and control via standard web browser or evaluation software DynoWare • Compatible with LabVIEW • Two-port Ethernet interface with switching functionality

• lathe
• Milling machine
• Grinding Machine

A general-purpose data acquisition system for controlling interfaces and charge amplifiers!

This DAQ system is versatile and serves as a data acquisition system for controlling interfaces and charge amplifiers. It is suitable for force measurement using single-component or multi-component force sensors, in addition to cutting power meters. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Easy installation using USB 2.0 port • Remote control of charge amplifiers • Powerful data acquisition system • High sampling rate • Trigger function

• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

Measure the three orthogonal components of force, enabling the measurement of extremely small forces with high resolution and high sensitivity!

The multi-component small power meter model 9119AA1 measures three orthogonal components of force and enables the measurement of extremely small forces due to its high resolution and sensitivity. ◇ Measurement range: ±4kN, Top plate: 39x80mm (9119AA1) / 55x80mm (9119AA2) －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Compact design • High sensitivity and natural frequency • Minimal temperature influence • Titanium top plate • Cutting force measurement in ultra-precision machining • Multi-component force measurement

• Other measurement, recording and measuring instruments

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.