[Product Catalog] The Rion Corporation Particle Measurement Instrument Comprehensive Catalog 2019-2020 has been uploaded.

Measurement of insoluble particles in injectable preparations at pharmaceutical factories: "Japanese Pharmacopoeia Test Method for Insoluble Particles in Injectable Preparations, Method 1: Light Obscuration Particle Counting Method."

The liquid particle counter 'KL-05' is an automatic measuring device that can measure fine particles with a diameter of 1.3 to 100 μm using a light obscuration method. It is suitable for measuring insoluble fine particles in injectable preparations in pharmaceutical factories. 【Features】 ■ Complies with the insoluble particle test for injectable preparations as specified by the Japanese Pharmacopoeia (JP), United States Pharmacopeia (USP), European Pharmacopoeia (EP), Korean Pharmacopoeia (KP), and Chinese Pharmacopoeia (ChP). ■ Supports small volume measurements (USP 787). Small volume sample holders such as 10 mL capacity syringes and ampoules are available (optional). ■ Complies with FDA's 21 CFR Part 11. Enhanced operator and password management features. Also supports electronic signatures. ■ Measurement results can be output to LIMS and other systems via serial communication. ■ Measurement results can be output as PDF or text files. ■ Uses SSD as built-in storage to improve operational speed. ■ Measurable particle size range of 1.3 μm to 100 μm, rated flow rate of 25 mL/min (optional factory setting for 10 mL/min), and customizable particle size classification of up to 20 stages. ■ The semiconductor laser light source is guaranteed for three years. *For more details, please refer to the catalog. Demonstrations are also available, so feel free to contact us.

• Particle Counter

The simple and low-priced KC-51, and the multifunctional KC-52 with a touch panel!

The handheld particle counters KC-51/KC-52 have a streamlined design that allows for accurate measurement results without obstructing the flow of sample air. They feature an ergonomic design with a large, easy-to-read display, providing user-friendliness for the operator. We offer two models: the simple and low-cost KC-51, and the multifunctional KC-52 with a touch panel. Both use environmentally friendly rechargeable batteries (lithium-ion batteries). For more details, please contact us or refer to the catalog.

• Particle Counter
• Other measurement, recording and measuring instruments

Optimal for air cleanliness management in pharmaceutical manufacturing environments!

The KC-31/KC-32 air particle counters are suitable for air cleanliness management in pharmaceutical manufacturing environments (evaluating cleanliness classes according to ISO 14644-1, PIC/S, and EU-GMP Annex 1). Due to their high flow rate, measurement times are short, making them useful even in electronic device manufacturing sites. They are lightweight and can be battery-operated, allowing for flexibility in measurement locations. Approximately 5,000 measurement results can be stored in the built-in memory, and they can also be copied to a USB memory stick. Additionally, the housing is made of stainless steel, enhancing chemical resistance. For more details, please contact us or refer to the catalog.

• Particle Counter

Chemical circulation filtration device suitable for cleaning particle counters and blank checks.

The "Chemiboy" is a device that maintains cleanliness by circulating and filtering the liquid, providing it to the particle counter. The minimum filtration particle size is 0.1 μm under standard specifications, and the maximum flow rate is 2 L/min, making it usable at 20°C (room temperature). This device is suitable for cleaning the particle counter and performing blank checks. 【Features】 ■ Maintains cleanliness while providing liquid to the particle counter through circulation and filtration ■ Minimum filtration particle size is 0.1 μm (standard specification) ■ Maximum flow rate is 2 L/min ■ Suitable for cleaning the particle counter and performing blank checks ■ Optional items such as glass overflow tanks and degassing membrane modules are available *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment
• others

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall