Ultra-small lot production of industrial resin parts.

Shortest half-day estimate / <Ultra-small lot> Cutting processing of resin and engineering plastics

<Material> Resin/Plastic / MC901 (MC Nylon) <Processing> Gear cutting <Size> φ100mm x Number of teeth 100 x Module 1mm This product is a gear machined from MC Nylon. We have taken into account the expansion rate of plastic to ensure that the module specifications are accurately met. MC Nylon has properties such as strength, chemical resistance, and heat resistance, making it a versatile engineering plastic used in various fields. We can also accommodate grades such as sliding MC Nylon and conductive MC Nylon. In addition to resin and plastic, we also work with metals such as aluminum, iron, and stainless steel, and we can accept orders for single-piece processing of individual parts. Please attach a drawing for an estimate. Other processing achievements are listed in the various "Processed Parts Achievement Catalogs" available for download below under [PDF Download].

• Other machine elements

Shortest half-day estimate / Manufacturing of parts without drawings (reverse engineering) / We handle everything from scanning the actual item to processing based on drawings.

Do you have any of the following concerns regarding parts procurement? 1. The parts have been discontinued, and there are no suppliers available. 2. I can no longer rely on the manufacturing company I had requested. 3. The parts are damaged or worn and need replacement, but they are old parts and there are no drawings available. 4. There are no drawings, and I want to create the same item from the actual part. → Our company, which has three quality control centers in Japan, can take your actual part and handle everything from drawing creation to processing and inspection in one go. We perform scan modeling using non-contact 3D scanner-type three-dimensional measuring machines and image dimension measuring devices to reproduce the drawings. Additionally, we can handle quantities starting from single-item processing! We streamline your procurement process with a single point of contact for surface treatment, hardening, polishing, and more. Furthermore, our company also accepts measurements and evaluations of dimensions, geometric tolerances, three-dimensional measurements, curved surfaces, roundness, surface roughness, etc. We can handle everything from metals to plastics! Trust us with the cutting processing of prototype and development parts. For more details, please contact us or download our catalog.

• Contract measurement

Shortest half-day estimate / Aluminum (A5052) milling and machining processing / Prototype and single-item processing accepted.

<Material> Aluminum / A5052 <Processing> Machining and milling <Size> H7mm × D150mm × W150mm We have received an order for the production of aluminum plates for machine parts. Aluminum cutting is one of the most requested processing services at our company. This product has three corner holes. Aluminum plates with corner holes may experience warping or distortion, but we process them with high precision in flatness and parallelism. We can handle not only metals like stainless steel, iron, brass (copper), and steel, but also plastics, rubber, and resin. Additionally, we provide comprehensive support from material procurement to processing, surface treatment, and inspection, accommodating both single-item processing and larger orders. From metals to plastics, we are your go-to for cutting processing of prototype and development parts.

• Processing Contract

Half-day estimate at the shortest / Leave large processed items and long-length processed items to us.

<Material> Stainless Steel / SUS303 <Processing> Milling and Machining This product is a medium-sized processed item made from SUS303 stainless steel. This particular item is approximately 300mm in length, but we can also accommodate lengths over 1,000mm. Since there are fewer processing companies that specialize in large parts compared to those that focus on medium and small sizes, there may be cases where you cannot find a supplier or are unaware of where to arrange for processing. In such cases, please feel free to utilize our services. Our track record for producing large and long parts has been increasing year by year. We can handle everything from processing to treatment in one go. Additionally, our processing achievements are listed in various "Processed Parts Achievement Catalogs," which can be downloaded from the [PDF Download] section below. We can handle everything from metals to plastics! Trust us with your cutting and processing needs for prototype and development parts.

• Other machine elements

Shortest half-day estimate / High-precision machining of difficult-to-cut materials from just one part.

<Processing> Wire Cut <Material> Stainless Steel / SUS303 <Size> H40mm × W25mm × D15mm This product is a wire-cut item made from SUS303 stainless steel. With wire cutting, we can easily process complex shapes and difficult materials like stainless steel and hard materials such as cemented carbide. High-precision processing is possible, with no burrs or edges, resulting in a clean finish. We handle everything from material procurement to complete processing and inspection in one go. We can accommodate single parts, one drawing, and individual processing, so please feel free to consult with us. For other processing achievements, please refer to the various "Processed Parts Achievement Catalogs" available for download below. Additionally, detailed information is also available on our official website. From metals to plastics, we are your go-to for cutting processing of prototype and development parts.

• Other machine elements

Shortest half-day estimate / Deep hole processing of stainless steel (φ2mm × L150mm)

<Material> Stainless Steel / SUS303 <Processing> Lathe Processing / Deep Hole Processing <Size> Small Diameter φ2mm × W150mm Although it is not visible in the photo, deep hole processing has been applied, and the inside is through-holes. Deep hole processing is done using tools like gun drills, but if ultra-small diameter deep holes are required, electrical discharge machining is used. Even in cases where processing is spread across multiple locations, our company can handle it all in one place. We also accept orders for the production of parts requiring fine processing, such as inspection device components and medical device parts, starting from single-item processing, so please feel free to consult or request us. Other processing achievements are listed in the various "Processed Parts Achievement Catalogs" available for download via the [PDF Download] link below. From metals to plastics, we are your go-to for cutting processing of prototype and development parts.

• Other machine elements

Shortest half-day estimate / Resin cutting processing

<Material> Resin/Plastic / PMMA (Acrylic) <Processing> Milling / Machining This product is a machined part made from PMMA (Acrylic). It is recognized for its high transparency, but it also excels in water repellency and impact resistance. We also offer PC (Polycarbonate) at our company. It has higher impact resistance and durability compared to acrylic. We can suggest materials considering the intended use of the parts, required properties, and price. We handle everything from material arrangement tailored to your application to processing and inspection in one package. Regarding lot sizes, we can accommodate from a single part, one drawing, to individual processing, so please feel free to consult with us. Our processing achievements are published in various processing parts achievement catalogs available for download in the PDF section below. From metal to resin, we are your go-to for cutting processing of prototype and development parts.

• Food Conveyor Equipment

High-precision machining processing for SS400 steel with a minimum half-day estimate.

<Material> Iron / SS400 <Processing> Machining <Size> φ14mm × t4mm This product is a machined item made from SS400 steel. It is a prototype for semiconductor manufacturing-related components. Despite being a finely detailed and complex cutting process, strict dimensional tolerances are applied throughout. You can trust us with such high-precision machining, even for single-item processing. We can accommodate requests for the production of development items and prototypes, as we can handle one part with one drawing for single-item processing. For more information on our processing achievements, please refer to the various "Processed Parts Achievement Catalogs" available for download in the section below. Additionally, detailed information is also available on our official website. From metals to plastics, please leave your cutting processing needs for prototypes and development parts to us.

• Other machine elements

Shortest half-day estimate / Leave the measurement of geometric tolerances and precise dimensions to us!

Leave the high-precision, small-lot production of components such as bearings, joints, manifold blocks, and flanges to us. We can manufacture from a single piece to small quantities. We accommodate a wide variety of sizes, from small to large. We have extensive experience in producing precision machined parts for fluid measurement devices with strictly specified dimensions and geometric tolerances, and we have a wealth of achievements in fluid components. ◎ We possess a 3D scanner-type three-dimensional measuring machine that enables inspection of curved surfaces and deep holes. Post-processing inspections are conducted by our inspection technicians in our precision inspection room with a "full inspection" of all areas! Free estimates! For information on our measuring equipment and precision inspection room, please refer to the catalog or our website below. Trust us with high precision for small quantity projects, single piece processing, and fluid components. We can handle everything from metals to plastics! Leave the cutting and processing of prototype and development parts to us.

• joint

Proposal for shortening delivery times, reducing costs, and improving operational efficiency in the production and procurement of processed parts, with a minimum estimate of half a day (VA/VE).

"Before" ◎ Complex procurement operations with multiple suppliers [For example, when the supplier changes for each processed part, communication with multiple companies is necessary.] - Comparative quotations - Comparison of processing suppliers - Selection of suppliers - Searching for new procurement sources, etc. ◎ Management of products with long processes [Process management, quality control, delivery management, and handling of defects are required.] - Material procurement to processing (aluminum, SUS / machining, lathe), etc. - Surface treatment, hardening, polishing, finishing - Inspections at each stage "After" Our "procurement of processed parts" handles all these operations in one go. No need for communication with multiple companies; we are your only point of contact! Process management and other tasks are also unnecessary. We ensure timely delivery, accuracy, and quality. The time spent on meetings with various companies, bringing in parts, and inspections can be redirected to your core business, enhancing productivity. Additionally, our broad procurement capabilities cover a variety of processing needs, allowing you to procure the required processed parts more quickly and efficiently. The "Procurement Improvement Proposal Book for Processed Parts" explains everything clearly using illustrations! From metals to plastics, leave the cutting and processing of prototype and development parts to us.

• Other machine elements

Shortest half-day estimate / We only accept customization and modification design of equipment.

Dear Customer / Precision Machinery Parts Manufacturer, End User / Electronic Equipment Manufacturer, Request Details / Modification Design Using Existing Equipment Main Specifications Transport of small lithium-ion battery parts / Cutting from transport jigs Laser marking / Reel taping / Reel winding Device Dimensions / W3,500mm × D1,200mm × H1,000mm This time, we only accepted the mechanical and equipment design. We were responsible for the mechanical design of the work transport jig supply section, the cutting / retrieval / feeding section of the work, and the reel winding section. The customer handled parts procurement, assembly, and other aspects outside of mechanical design. We also accept projects that involve design only. We can flexibly respond to customer requests, whether for custom equipment or, as in this case, using existing equipment. Our greatest strength is our ability to provide a one-stop service for the entire process from design to installation in equipment and jig manufacturing. Please feel free to share any concerns you have regarding equipment and jigs, including robots, transport, and production facilities. From metal to plastic, we are ready to handle cutting and processing of prototype and development parts.

• Other conveying machines

Shortest half-day estimate / Lathe processing (stainless steel / SUS303) + "multi-process products" such as cylindrical grinding can be completed by a single company!

<Material> Stainless Steel / SUS303 <Processing> Lathe Processing / Cylindrical Grinding <Size> φ20mm × L200mm This product uses SUS303 stainless steel and has undergone grinding processing on the cylindrical part. This improves sliding performance and is expected to reduce wear on the product. Additionally, grinding processing has been applied, including fine adjustments to achieve surface roughness and high precision dimensional tolerances. We can accommodate not only cylindrical grinding but also flat grinding, electropolishing, buffing, and more. We also manage multi-process products like lathe processing + grinding in a single package, and we can handle other surface treatments as well. Customers looking to review the costs and delivery times of processed stainless steel components are encouraged to try our quotation service. For more information, you can download the "Processing Achievement Catalog" from the link below.

• Packing Machine

Half-day estimate at the shortest / Leave high-precision aluminum processing to us! Specializing in the processing of various aluminum materials (duralumin, general-purpose aluminum, pure aluminum) including surface treatment.

<Material> Aluminum / A5052 <Processing> Milling and machining <Size> H1.5mm × D30mm × W47mm This aluminum processed product is a positioning plate related to electronic components. The material used is aluminum A5052. The central part, which is the thinnest, has a thickness of less than 1mm and is processed with high precision. You can rely on us for machining of non-ferrous metals (aluminum) and metals. We accept orders for single-item processing, which is a notable feature. We also have many examples of processing parts related to electronic components and semiconductors, as well as development and prototypes. Other processing achievements using aluminum material are listed in various "Processed Parts Achievement Catalogs" available for download below. We handle cutting processing for prototype and development parts, from metals to plastics!

• Other machine elements

Minimum half-day estimate / Carburizing and quenching treatment of shaft (iron/SCM415)

We have manufactured only two shafts. We used SCM415 steel and applied carburizing hardening. The hardness is high at HRC (Rockwell hardness) 52 or higher. Carburizing hardening is a process that hardens the surface layer to enhance wear resistance while keeping the interior soft and maintaining toughness. Since carbon is added, it is generally applied to low-carbon steel and is commonly used for components such as shafts. Additionally, our in-house quality control department is equipped with a Rockwell hardness testing machine, allowing us to deliver quality-assured products that have been checked for precise dimensions, geometric tolerances, and hardness. We specialize particularly in machining parts made of iron, aluminum, and stainless steel that are palm-sized. If you are considering a comprehensive solution from processing to hardening and polishing, please try our quotation.

• Other machine elements

Shortest half-day estimate / "High-quality" parts from just one piece! Procured at "reasonable" prices / costs.

The manufacturing industry's downturn continues, and the future remains uncertain. In such times, what we can propose is... The necessity for streamlining and enhancing the efficiency of manufacturing processes. It's not just about smart factories and IoT. → Our company has a unique procurement model that simplifies procurement operations and process management. We purchase a variety of machined parts, such as lathes, milling, and sheet metal, from a single source. From estimates to processing, surface treatment, and quality assurance, we manage everything, completing the process in a one-stop manner from your request. With partnerships with approximately 1,110 cooperating companies both domestically and internationally, we can provide a stable supply of parts that meet delivery times, precision, and processing needs. 〇 High-quality products The quality of incoming parts is poor, leading to many corrections and remakes. The number of defective products during inspection tends to increase... → At our company, we conduct thorough inspections of all procured parts in our own precision inspection room before delivery. We address defects in advance, which also helps reduce your inspection burden. 〇 Want to keep costs down? We can accommodate single-item processing while still achieving reasonable prices comparable to processing companies. Utilizing our unique procurement network, we offer optimal prices that meet your requirements! Simply send us your drawings in PDF format for a free estimate.

• Other machine elements

We provide a minimum half-day estimate and use a component analysis machine to verify and guarantee the steel materials.

〈Equipment Details〉 Equipment Name: Emission Spectroscopy Analyzer (Component Analyzer) Model: SPECTROTEST Manufacturer: AMETEK Year of Introduction: 2019 This measuring instrument performs quantitative analysis of elements contained in steel materials, enabling material identification, among other functions. *Basically, component analysis is conducted under the "Measurement Services." - Confirm that there is no contamination with foreign materials in the production site - Verify and guarantee that materials meet specifications before product shipment or upon material receipt - Check the welding parts (confirm that the materials used in the welding material are correct) etc... Measurable Elements: Carbon (C), Nitrogen (N), Titanium (Ti), Phosphorus (P), Nickel (Ni), Sulfur (S), Boron (B), Copper (Cu), Cobalt (Co), Aluminum (Al), Magnesium (Mg), Tin (Sn), Zinc (Zn), Lead (Pb), Iron (Fe) A wide variety of elements can be measured. Please feel free to consult us about any concerns regarding inspections. Free estimates available! From metals to resins, we can handle cutting processing for prototype and development parts!

• Contract measurement

We offer the shortest half-day estimate / support for dimension measurement and geometric tolerance measurement.

Leave the "contract measurement" of processed parts to us. We continue to expand our inspection facilities to meet all measurement needs. We have CNC three-dimensional measuring machines, image dimension measuring devices, roundness measuring machines, component analyzers, etc., enabling us to handle dimensional measurement, geometric tolerance measurement, hardness and component measurement. We also provide calibration certificates and inspection reports. In our inspection and logistics building, we have a precision inspection room of about 350 square meters (approximately 210 tatami mats), where a wide variety of processed parts are inspected daily. (Track record: In our processed parts procurement business, we inspect 60,000 parts monthly.) Our inspection technicians, skilled in speed, accuracy, and technical expertise, will support your quality assurance operations. Please feel free to consult us about any concerns regarding inspections. Estimates are free. From metals to plastics, leave the cutting and processing of prototype and development parts to us.

• Contract measurement

Shortest half-day estimate / We handle everything up to assembly! Leave the production and assembly of custom equipment and jigs to us.

◎ Customer: Electronic Equipment Manufacturer ◎ Purpose of Introduction: New production of a fixture to secure printed circuit boards ◎ Specifications: - Assembly of M2 female thread spacers (24 pieces) - Base plate made of aluminum (A5052) (no surface treatment) Device dimensions (mm) / W × D × H Approximately 300mm × 250mm × 10mm We have conducted assembly in-house. We will make proposals and production tailored to needs, such as the manufacture of fixtures for horizontal deployment. We can provide a one-stop service for the entire process from design to installation in the production of devices and fixtures. Our achievements in manufacturing lines, production equipment, and other devices and fixtures are listed in the "Company Information" section below. We handle everything from metal to plastic! Please leave the cutting processing of prototype and development parts to us.

• Substrate transport device (loader/unloader)

Leave it to us for the shortest half-day estimate, from material arrangement to processing, surface treatment, and quality assurance.

Leave the high-precision, small-lot production of pins, clamp parts, flanges, and jig components to us. We can manufacture from just one piece. We accommodate various shape variations and sizes, including circular, diamond, straight, and tapered shapes. We also have a wealth of experience in producing complex shapes beyond basic forms! Post-processing inspections are conducted in our in-house precision inspection room, where inspection engineers perform a "full inspection" of all areas. → For information on our precision inspection room and measuring equipment, please refer to the catalog or our website linked below. Trust us with high-precision, small-quantity projects for jig parts and mold components. For examples of processed parts, please see our catalog "100 Processed Parts." Estimates are free! We handle everything from metals to resins! Leave your cutting processing needs for prototype and development parts to us.

• Inspection fixture

Shortest half-day estimate / We manufactured processed parts for electronic component-related equipment using machining. Leave high-precision machining and milling to us!

〇Performance Introduction Material: SS400 Processing: Machining and Milling Application: Electronic component-related equipment Size: W90mm x D45mm x H10mm Features: This product is a machined part made from SS400 (steel). Our company specializes in cutting processes such as palm-sized lathe processing and machining. The surface treatment includes electroless nickel plating, which provides a uniform thickness even on complex shapes, making it effective for parts with strict dimensional tolerances. We handle everything from material procurement to processing and surface treatment in one package, and after processing, we deliver inspected products that have undergone thorough checks in our precision inspection room. (A list of measuring instruments is available on our website.) We accept precision machining parts for electronic component-related equipment starting from "single item processing." Mass production is also possible. For other machining achievements, please refer to the catalog below: "Processed Parts Catalog (Various)."

• Parts feeder

We offer a minimum half-day estimate and propose to reduce the burden of inspections by utilizing us as an external measurement company.

In the field of microfabrication, it is difficult to apply contact measurement instruments (calipers, micrometers, three-dimensional measuring machines) to the target objects. Therefore, our company uses non-contact image dimension measuring instruments. We have two models of "Keyence Image Dimension Measuring Instruments": IM-8000 and IM-7030. By illuminating the object and measuring its shadow, we can achieve high-precision measurements even for small parts and fine processing areas. We can simultaneously measure the height and depth of the target object. Additionally, we can measure up to 99 locations at once, allowing us to measure pitch and depth even for finely slotted items like heat sinks. For the measurement and evaluation of microfabricated products, please leave it to Agency Assist. We also accept measurements and evaluations of dimensions and geometric tolerances, including three-dimensional measurements, roundness, and surface roughness. For details on our equipment lineup and services, please refer to the "Company Profile." From metals to plastics, we are ready to handle cutting and processing of prototype and development parts.

• Contract measurement

We can respond with a minimum estimate of half a day, starting from one drawing or one part. You can trust us to handle everything from processing to inspection!

<Material> POM (Polyacetal) / MC Nylon / PTFE (Fluororesin) <Processing> Various cutting processes We accept a wide range of resin part manufacturing, including semiconductor equipment, medical machinery, and food equipment components. We offer a broad selection of materials, including general-purpose plastics and engineering plastics. The processing method is through cutting rather than injection molding. Therefore, we specialize in small-batch, diverse, and single-item processing rather than mass production. Please leave the resin cutting for prototypes and development products to us. Orders can be placed for small lots, single parts, and individual processing. First, please attach your drawings and request a quote. Other processing achievements are published in the various "Processed Parts Achievement Catalogs" available for download in PDF format. From metals to resins, leave the cutting processing of prototypes and development parts to us!

• Other machine elements

Shortest half-day estimate / Please leave flat grinding, cylindrical grinding, barrel polishing, and buffing to us.

"Performance Introduction" 〈Material〉Stainless Steel / SUS303 〈Processing〉Machining / Milling / Polishing 〈Size〉H6mm × D40 × W75mm This product is made of SUS303 (stainless steel) and has a flat surface finish achieved through surface grinding. It is expected to improve joint surface accuracy, processing accuracy, wear resistance, and corrosion resistance. Additionally, we can accommodate cylindrical grinding, buffing, barrel polishing, and more, with a proven track record in manufacturing parts for food machinery, medical machinery, and semiconductor manufacturing. By simply providing us with your drawings, we can handle everything from material procurement, all processing, hardening, polishing, to surface treatment. For more information on other processed parts and manufacturing achievements, please refer to the catalog "100 Processed Parts" below. We can handle everything from metals to plastics! Trust us with your prototype and development part machining.

• Other machine elements

Shortest half-day estimate / Pulley for round belt / SUS304 / Lathe processing

A pulley has the role of adjusting the belt and transmitting power to shafts and other components. It is one of the important machine parts used in various precision machines, including automobiles. This time, we have manufactured a pulley for round belts. It is a single type with one groove, designed with a U-shaped groove to fit round belts. <Processing> Lathe processing <Material> Stainless steel / SUS304 In addition to pulleys for round belts, we can also manufacture timing pulleys and idlers from materials such as aluminum, steel, and resin. We can accommodate small lots starting from a single piece, handling everything from material procurement to processing and inspection in-house. Other processing achievements are listed in the various "Processed Parts Achievement Catalog" available for download in the [PDF Download] section below. From metal to resin, we are your go-to for cutting processing of prototype and development parts.

• Other machine elements

Shortest half-day estimate / Automation of engraving on packages and parts, and inspection.

Laser marker (engraving) equipment for metal and resin parts ◎ We respond to a variety of equipment manufacturing needs. For example… 　・Automation of the engraving process accompanying the launch of a new line 　・Improvement of inspection accuracy for the engraved parts 　・Design of equipment only 　・Manufacturing of peripheral equipment for processing machines (loaders/conveyors, unloaders) only 《 Manufacturing Achievements 》 Composite equipment of laser marker + image inspection 　We designed the equipment in-house. 　The inspection machine is equipped with a camera from Keyence. 　The laser engraving machine was incorporated from equipment provided by the customer. For custom equipment manufacturing, trust Agency Assist. We provide a one-stop service from design to assembly and installation. For more details on equipment and jigs, please refer to the "Company Profile." From metal to resin, we handle cutting processing for prototype and development parts.

• Other inspection equipment and devices

Shortest half-day estimate / semiconductor manufacturing equipment parts / aluminum processed products / microfabrication

"Introduction of Achievements" <Material> Aluminum (A5052) <Processing> NC Lathe Processing <Application> Semiconductor Manufacturing Equipment Parts <Size> φ25×40mm <Features> This product is processed using A5052 (aluminum). Since it is used for semiconductor manufacturing equipment parts, it must be free from scratches and dents, and care is taken during processing to ensure that burrs and sharp edges do not affect product transport. Additionally, there are requirements for processing accuracy such as concentricity and roundness. A feature of this product is that a groove with a width of 0.7mm and a depth of 0.5mm is machined on the top surface, and fine holes with diameters of 0.5mm and 0.3mm are also created. Our company is capable of fine processing at approximately 0.05 (50μ). We specialize in processing small-sized parts like this. For fine processing and small hole electrical discharge machining, please leave it to us. We accept single-item processing. For other processed parts and production achievements, please refer to the catalog below titled "100 Processed Parts." Metal to resin is acceptable! For cutting processing of prototype and development parts, please leave it to us.

• Other machine elements

We have received an order for the manufacturing of medical catheter production equipment with a minimum estimate of half a day.

◎Customer: Medical Device Manufacturer ◎Purpose of Introduction: New line installation and automation ◎Specifications: - Heating shrink tube with a heater - Monitoring heating status on a monitor - Desktop model (compact size) Equipment dimensions (mm) / W × D × H Approximately 800mm × 400mm × 500mm We have received an order from a group company of a major pharmaceutical company for the manufacturing and inspection equipment. To automate the production line for medical catheters (shrink tubes), we have accepted the design for the ordered equipment. From equipment design to parts processing and assembly, including electrical design and manufacturing of associated control panels, we provide a one-stop solution for the entire process. We can offer equipment manufacturing tailored to customer needs in terms of functionality, specifications, and operability. For achievements in production equipment/manufacturing lines and other devices and jigs, please refer to the "Company Profile" section below. From metals to plastics, we are ready to handle cutting and processing of prototype and development parts.

• Mechanical Design

Shortest half-day estimate / Including black anodizing, procurement from just one part!

Leave the precision parts for inspection and manufacturing equipment of electronic devices, electronic components, and semiconductors to us. We accept machining of aluminum and SUS for camera barrel frames and inspection-related parts, including 5-axis machining and complex lathe processing, starting from just one piece. □◎ From one part and one drawing, "OK" ◎□ We do not handle mass production. We specialize in single-item processing required in prototype and development fields, ranging from one to several dozen pieces. □◎ We also handle surface treatment and heat treatment ◎□ We will arrange for surface treatments such as black chrome plating, black anodizing, and electroless nickel plating. □◎ Of course, we deliver after inspection ◎□ Our inspection technicians conduct thorough inspections in our 350 square meter precision inspection room (owned by us). We have many state-of-the-art devices, including image dimension measuring instruments and CNC three-dimensional measuring machines! For more information on processed parts and production achievements, please refer to the catalog below titled "100 Processed Parts." We handle everything from metal to resin! Trust us with the cutting processing of prototype and development parts.

• Other optical parts

We provide comprehensive support from design to assembly / We have accepted the production of manufacturing line-related equipment.

Customer: ◎ Precision Equipment Manufacturer Purpose of Introduction: ◎ For the expansion of a new line Specifications: - Device for loading automotive spline shafts into a press machine - Device for loading workpieces discharged from the press machine into an inspection machine - Using FANUC multi-axis robots (provided by the customer) Device Dimensions (mm) / W × D × H Approximately 2500mm × 1500mm × 2000mm We have manufactured a device that loads spline shafts (drive shafts) for electric vehicles into a press machine, and subsequently loads the workpieces into an inspection machine. The design was carried out in-house, and production was done by a partner company. Additional specifications are planned for this device as well. We can provide device manufacturing tailored to customer needs in terms of specifications, operability, and functionality. We can handle the entire process from design to installation of the device manufacturing as a one-stop service. For our achievements in manufacturing lines, production equipment, and other devices and jigs, please refer to the "Company Information" below. Additionally, please trust us with the machining of prototype and development parts made from metal to plastic materials.

• Other conveying machines

Shortest half-day estimate / We support plastic parts (PFA, PTFE, PCTFE) for medical devices and instruments.

Teflon is excellent in heat resistance (260°) and cold resistance (-100°), characterized by its non-stick properties, and is used for coatings. In the medical field, it is used in a wide range of medical devices due to its chemical resistance and ecological synthesis functions. You can trust us with precision machining of plastic parts for medical devices and instruments using PFA, PTFE, and PCTFE (fluororesins). We specialize in small lot production of various types in the fields of prototyping, research, and development, and can also accommodate other resins such as PC, PVC, PP, and PEKK. We have numerous production achievements in industries outside of healthcare, including semiconductors and food. For confirmation of our achievements and case studies, please refer to the catalog "100 Processed Parts" below. We can accept drawings in either 2D or 3D for quotations. Additionally, we can also handle drafting for items without drawings. From metals to resins, you can rely on us for cutting and machining of prototype and development parts.

• Other physicochemical equipment

Super engineering plastics / machining / extensive experience in various industries such as semiconductor equipment, medical device parts, and food machinery parts!

This is ultra-precision cutting of resin using Sumika Super S1000 (formerly known as Econol). It is a resin with excellent heat resistance, capable of withstanding temperatures up to 400°C without melting or deforming, and a typical usage temperature of 260°C. The cutting resistance is low, and there is minimal melting due to heat, resulting in excellent dimensional stability. Additionally, it generates very little burr, making it suitable for fine processing. The production results shown in the image are parts supplied to a semiconductor manufacturer. The slit section has a dimensional tolerance of 0.7mm with a precision of 1/100mm, and a special metal saw was used by our technicians to achieve the actual processing. We also accept the production of precision medical components using Sumika Super S1000. Furthermore, we can handle cutting processing of super engineering plastics. Our company is involved in cutting processed parts across various industries and has extensive experience. We have arranged numerous parts and have also handled inspections. We provide processed parts with quality assurance based on our high inspection technology. We welcome inquiries for cutting processing of prototype and development parts, regardless of material, from metals to resins.

• Semiconductor inspection/test equipment

Shortest half-day estimate / Aluminum timing pulley (2 pieces)

<Processing> Lathe processing / White anodizing <Material> Aluminum / A5056 <Size> φ55mm This is an aluminum timing pulley that emphasizes lightness. The serrated part engages with the timing belt, making it an important component for power transmission. The surface treatment has been done with anodizing (white). It enhances the natural color of the aluminum, giving it a whitish hue. We can handle everything from material procurement to cutting processing and surface treatment, accommodating single-item processing. In addition to aluminum, we have a wide variety of materials available, and we can also work with metals like carbon steel when strength is a priority. Other processing achievements are listed in the various "Processed Parts Achievement Catalogs" available for download below. From metals to plastics, we are your go-to for cutting processing of prototype and development parts.

• Power Transmission Equipment

Shortest half-day estimate / We have manufactured complex-shaped lathe-processed products. We provide a one-stop service for materials, lathe processing, wire cutting, Tuftride treatment, and precision dimension measurement.

<Processing> Lathe machining / Wire cutting / Taft Ride treatment <Size> φ52mm × H65mm <Material> Stainless steel / SUS303 This is a shaft holder made from stainless steel SUS303. It is processed using lathe machining, and the hollowed-out parts are processed by wire cutting. Therefore, it can be easily machined into complex shapes. Additionally, the surface treatment has been applied with Taft Ride treatment. If there is insufficient sliding, the sliding properties can be improved by applying Taft Ride treatment. In this way, we handle everything from material procurement to lathe machining and surface treatment. Furthermore, for subsequent precise dimensional measurements, we conduct quality checks with the latest digital measuring equipment and inspection technicians, inspecting all areas before delivery. Our company specializes in lathe and machining processes. We can accommodate everything from small parts to long-length lathe machining, including single-item processing. Other achievements in lathe-processed products are listed in the various "Processed Parts Achievement Catalogs" available for download below. We can handle cutting processing for prototype and development parts, from metals to resins!

• Other machine elements

Shortest half-day estimate / Procurement of processed parts for medical devices and food machinery from one piece.

PEEK material is resistant to high temperatures, wear, and impact, and its mechanical strength and chemical resistance properties are among the best in resins. It is used in various industries such as medical, automotive, food, and semiconductors. Leveraging its chemical resistance, we also handle the production of precision parts for medical applications that come into contact with chemicals and reagents. At our company, we accept machining of PEEK material as well as engineering plastics and SUS, from single parts to individual processing. After machining, our in-house precision inspection room conducts precise dimensional measurements using three-dimensional measuring machines and image dimension measuring devices, ensuring that we deliver inspected products! For examples of our processed parts, please download our catalog "100 Processed Parts." From metals to resins, we are your go-to for machining of prototype and development parts!

• Other machine elements

Shortest half-day estimate / Laser marking processing on SUS303! Leave high-precision laser processing to us!

This is an introduction to our achievements in laser marking processing on SUS303. Material: SUS303 (stainless steel) Processing method: Lathe processing / Laser marking (engraving) We shaved off the surface layer of the workpiece and printed the characters. In addition to marking, we can also handle "thin plate cutting," "high-precision hole processing," laser hardening, and laser welding, all utilizing laser technology. Our company provides comprehensive support from material procurement to processing, surface treatment, hardening polishing, and precision inspection at each stage! Whether it's one part, one drawing, or small lots of various items, you can trust us with your needs. We can accommodate requests from all over Japan. Please feel free to contact us. For more information on our achievements in laser marking and lathe processing, please refer to the "Processed Parts Achievement Catalog" available for download in PDF format below. We can handle everything from metals to plastics! Trust us with your cutting processing for prototype and development parts.

• Other machine elements

Shortest half-day estimate / We handle precision machining of resin and plastic products in ultra-small lots (1 piece), including thorough inspection.

<Material> Resin/Plastic / ABS <Processing> Machining <Size> T8mm × D60mm × W140mm This product is a machined item made from ABS. ABS resin has a good balance of mechanical properties and is excellent in processability, hardness, and impact resistance. It is a type of general-purpose plastic, characterized by its lightness and strength. Due to its glossy appearance, it is used as mechanical parts in semiconductor and electronic devices. Our company supports milling, machining, turning, and precision sheet metal processing for materials such as resin and plastic, and we can manufacture both square and round items. We also accommodate metal parts! Whether it's one piece or one drawing, you can trust us with small lots and prototypes! Additionally, you can send us drawings with different processing requirements together! We can handle everything from estimates, production, to inspection for various types of processing. For more information on our processed parts, please download our catalog.

• Filling and bottling machines

We provide comprehensive support from design to assembly, solving customer issues through automation and labor-saving solutions based on our track record in equipment manufacturing for the food industry.

By automating and reducing manual processes through our devices, we can enhance production speed and efficiency, maintain stable production volumes, and ensure quality assurance while securing costs and time. Our company has experience in the food industry, having dealings with food machinery manufacturers. - Product Lineup - Automatic packaging machines Automatic powder machines Automatic bagging machines Automatic polishing and sorting machines Automatic stirring machines, etc. → We can handle everything from design, manufacturing, assembly, electrical work, and installation to requests for only the necessary processes. Additionally, in terms of parts procurement, we also handle food hygiene law-compliant materials such as SUS, PEEK, New Light, Sumika Super S, POM, MC Nylon, Duracon, Teflon, and PPS. Our strength lies in our ability to respond to procurement needs for necessary processing, from "one piece" onwards, including lathe work, milling, sheet metal, wire, discharge machining, and resin cutting! We can arrange drawings in 2D, 3D, or hand-drawn formats to match the customer's drawing specifications. For more details, please check the catalog download.

• Food Packaging Machinery

Shortest half-day estimate / We accept orders for the production of welding and bonding jigs.

◎Customer: Precision Equipment Manufacturer ◎Request: Production of welding jigs for similar repeat items ◎Main Specifications - Type that requires manual attachment and detachment - Device dimensions (mm) / W × D × H - Approximately 500mm × 500mm × 200mm - A jig for welding the two-part automotive washer tank This time, we produced a jig for use during welding and fusion. The jig is used to fuse the washer tank, and the attachment and detachment are manual. It is a compact tabletop-sized jig. We handled everything, including simple wiring, in-house. We can accommodate not only custom equipment orders but also partial requests for the design and production of jigs like this one. Our designers will flexibly respond to your needs. Our greatest strength is our ability to provide a one-stop service for the entire process from design to installation. We offer free estimates for equipment and jigs. Additionally, we accept not only jigs but also individual processing of machined parts and mass production, including surface treatment.

• Processing Jig

We will introduce our track record of manufacturing canning processed products with a minimum half-day estimate.

Our company handles canning processing products from material procurement to complete processing, including plating and painting, offering both single-item processing and bulk arrangements. This product is a milled item made from stainless steel and is processed using TIG welding. TIG welding uses inert gases such as argon to shield the molten area from air. This method generates an arc from the electrode rod to melt the base material while adding a filler rod during the welding process. It has the advantage of producing high-quality, stable welds with minimal spatter. Additionally, we can accommodate MAG welding and other methods. We offer free estimates multiple times, so please leave your stainless steel and aluminum welding processing needs to us! From metals to plastics, we are here to handle cutting processing for prototype and development parts.

• Other machine elements

Shortest half-day estimate / Equipment manufacturing tailored to materials used and intended applications.

Leveraging our achievements and network in procurement of processed parts, we also offer a one-stop service for the entire flow of "design," "parts procurement," "assembly," and "installation" in the manufacturing of complete equipment. In the food, pharmaceutical, and chemical industries, we respond to requests for custom equipment and peripheral devices such as mixers, granulators, conveyors, and dryers. We have a wide variety of parts available for procurement! (Including lathes, milling machines, precision sheet metal, resin cutting, and many more...) Please also consult us for electrical and circuit design to ensure optimal control! Our technical sales team, consisting of former designers and experienced machinists, will support you by conducting hearings from the preliminary design stage and making proposals. For details and achievements regarding equipment and jigs, please refer to the "Company Information" section below. Free estimates! From metals to resins, trust us with the cutting and processing of prototype and development parts.

• Food Processing Equipment

Shortest half-day estimate / Production results / Station conveyor booth

◎Customer ・Automated Machinery Manufacturer ◎Purpose of Introduction ・Introduced for the inspection line of air conditioning equipment parts ◎Main Specifications ・Quantity: Booths: 16 units / Conveyors: 24 units ・Additional installation of 5 units each of ES (electrical connection device) and CS (coupler connection device) ◎Device Dimensions (mm) / W × D × H ・Conveyor: 950mm × 950mm × 1290mm ・Booth: 1075mm × 1000mm × 1840mm We have manufactured station conveyors and booths for the inspection line of air conditioning equipment parts. The process involves inspecting parts with sensors and sequentially transporting workpieces on roller conveyors. For the design and manufacturing of equipment aimed at automating and streamlining the inspection line, as well as improving issues, please leave it to Agency Assist. We will handle everything from design to manufacturing and assembly in-house. From metal to plastic, we can manage it all! Please trust us with the cutting and processing of prototype and development parts.

• Conveyor

Shortest half-day estimate / Supporting the reduction of customer inspection burden!

Leave the precise dimensional measurement of fluid components to us. There are many issues such as difficulty in measuring impellers, deep holes, and curved surfaces, which can lead to increased time and decreased productivity. For example… 1. By using Agency Assist as an external measurement company, you can outsource the measurement and evaluation of parts, reducing the inspection burden. 2. It will become possible to inspect parts that could not be inspected before. ◎ Features - Leave the measurement of geometric tolerances such as cylindricity, roundness, and parallelism to us. → Surface roughness and hardness testing are also possible. - We have CNC three-dimensional measuring machines, 3D scanner-type measuring machines, and image dimension measuring devices. → With the latest non-contact measuring machines, we can measure points that were difficult to measure with contact types, including curved surfaces. - Reverse engineering → We can trace the parts entrusted to us, perform drafting, machining, and inspection, making it possible to create parts without drawings from single-item processing. We can support inspections in various ways. Estimates are free! From metals to plastics, leave the cutting and processing of prototype and development parts to us.

• Contract measurement

Shortest half-day estimate / Ayame, Hirame, Diagonal (taper) / Supports various knurling processes!

Knurling is used on parts that require a non-slip surface, such as grips and knobs. It is also applied to connection parts for purposes such as preventing disconnection and rotation. Our company can handle multi-process projects, such as [lathe processing + knurling], all in one go. We can respond to customer needs with various sizes and offer a wide range of knurling options, including diagonal (tapered), cross (diamond), and flat patterns. We have a wealth of experience in procuring processed parts for automation equipment. We specialize in small quantities of various types, prototype parts, development parts, semiconductor manufacturing equipment-related parts, optical device parts, and industrial robot parts. We can handle everything from metal to resin! Trust us with your cutting processing for prototype and development parts. Additionally, we deliver quality assurance products that have been precisely measured for dimensions at each stage using our in-house inspection equipment. If you have any issues with [knurling], please contact Agency Assist! More detailed information is also available on our official website (link below).

• Conveyor

Are you making progress on measures for the "2024 Problem"? With stricter management of drivers' working hours, reducing "waiting time" has become an urgent issue in the logistics field. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability situation, reducing unnecessary waiting and queueing, and shortening waiting times to alleviate the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start addressing the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult with us.

Tokyo, August 7, 2025 - (JCN Newswire) - Anthropic, an AI research and development company that develops the cutting-edge AI model Claude, announced today the appointment of Hidetoshi Tojo as the Representative Executive Officer and President of its Japanese subsidiary. Tojo has extensive experience driving growth for technology companies in Japan, most recently serving as the President and Executive Officer of Snowflake's Japanese subsidiary, where he was involved from the launch of the business and achieved significant growth. He has also contributed to the advancement of data utilization in major Japanese companies by closely collaborating with various system integrators. Additionally, he has experience leading teams at Google Cloud Japan and Microsoft, both at their U.S. headquarters and Japanese subsidiaries. For more details, please refer to: https://acnnewswire.com/press-release/japanese/101731/

We sincerely apologize for the inconvenience, but Asano Co., Ltd. will be closed for summer vacation during the following period. We appreciate your understanding. Closure Period: August 13, 2025 (Wednesday) to August 17, 2025 (Sunday) Reopening: August 18, 2025 (Monday) <Inquiries> We will respond sequentially starting from August 18, 2025 (Monday). Asano Co., Ltd. is a manufacturer that supports the development of mobility parts, including automobiles, motorcycles, bicycles, aircraft, and space rockets. We conduct in-house integrated production of sheet metal, plastic, and composite products. We offer proposals for hybrid molding and multi-material bonding, among others. ■ Inquiries ■ Asano Co., Ltd. Headquarters and Gunma Factory 2718-1 Sanwa-cho, Isesaki City, Gunma Prefecture, 372-0011 TEL: 0270-75-1700 FAX: 0270-75-1600 MAIL: salesg@asano-japan.com Official YouTube Channel: https://www.youtube.com/@asano-japan

Newly released: Contact Angle Meter Entry Mini Kit Model, Amazon Exclusive Model JISR3257 compliant, includes θ/2 method and contact angle analysis software. Windows PC sold separately. Complete product priced at ¥399,300 (tax included). At the same time, we have started selling individual components for the contact angle meter kit as an Amazon exclusive model: "θ/2 Method Contact Angle Analysis Software" Kit 1, "Stage + Backlight + Housing" Kit 2, and "Dedicated USB Camera" Kit 3. The contact angle meter can be integrated into the device, allowing for the combination of "θ/2 Method Contact Angle Analysis Software" Kit 1 and "Dedicated USB Camera" Kit 3 for applications. Only the necessary elements such as software and camera can be combined. These models are exclusive to Amazon and will be sold and shipped by Amazon.co.jp.

Our company, NICS Corporation (Headquarters: 1-11-1 Uno, Tamano City, Okayama Prefecture, President: Shinichiro Yamane), had an employee featured in the special article "New Star ★ Running" in the local economy section of the Sanyo Shimbun dated August 7.