[Sample Video] Introduction to Product Online Demo (Somax Corporation)

Brightness recovery and yield improvement. With the optical component mold cleaning machine "Cripika Ace OPT," you can perfectly remove dirt from molds for optical components such as light guide plates and lenses!

＼Contactless cleaning!／ The mold cleaning machine for optical components, 'Clipika Ace OPT,' perfectly removes dirt adhered to delicate optical molds without causing any damage. It addresses gas burns and resin stains, ensuring that even nano and micro-level dirt is not missed. 【Conventional maintenance of optical component molds】 ● Performed manually using cotton swabs and other tools ● Requires utmost care as it is prone to scratches ● May not completely remove all dirt ● Concerns about the burden on the body due to the use of organic solvents 【Clipika Ace OPT】 〇 Automatically cleans molds arranged in a dedicated basket 〇 Allows for contactless cleaning 〇 Cleaning solution penetrates every corner of the mold, lifting and removing dirt 〇 Uses a water-based cleaning solution that has low environmental impact and does not contain organic solvents We offer a lineup tailored to the size of the molds. *For details, please refer to the "Lineup."

• Other molds
• Other cleaning machines
• Ultrasonic Cleaner

Cleaning of die-cast molds and large mold temperature control and cooling pipes is now possible with SkatS!

The mold temperature control piping cleaning machine "Scattos" has significantly increased the cleaning liquid capacity to 60L, in addition to the functions of the conventional "Water Reamer." It is now capable of cleaning the temperature control piping of die-cast molds and large molds, as well as accommodating manifolds and below hoppers. Furthermore, the synergistic effect with the specially formulated cleaning liquid (Scattos WR-1), which has enhanced penetration power, maximizes cleaning effectiveness. Please utilize it to help alleviate labor shortages. 【Features】 - Compatible with large molds, die-cast molds, manifolds, and below hoppers - Built-in flow meter to quantify cleaning effectiveness - Pump power increased threefold (compared to WR-11-ADIII) - Automatic control of pump power output according to piping diameter - Simultaneously removes rust and automatically forms a rust prevention coating - Enhanced cleaning power through hybrid cleaning

• Other physicochemical equipment
• Other cleaning machines
• Other surface treatment equipment

Remove and prevent rust accumulated in the mold temperature control piping and cooling pipes to improve cooling efficiency!

The "Water Remover" is a rust removal machine that automatically handles everything from cleaning mold temperature control piping to rust prevention. It removes layers of rust and impurities that have accumulated in the mold temperature control piping, improving cooling efficiency. 【Features】 - No need to disassemble the mold; simply connect the mold and this product with a hose for easy operation. - Forms a rust prevention coating simultaneously with rust removal. - Adopts an air blow drying system, eliminating the need for rinsing or neutralization after rust removal. - Does not discharge rust removal liquid due to a completely closed system.

• Other cleaning machines
• Other surface treatment equipment
• Other cleaning equipment

A welding machine that does not emit ultraviolet rays or fumes, eliminating the need for protective face shields and masks. It also prevents warping and distortion caused by heat!

Just when you're in a hurry, the mold suddenly breaks. You want to use it right away... The mold repair welding machine "Morhei" does not produce ultraviolet rays or fumes, allowing for mold repairs to be done with the naked eye without the need for protective face shields or masks. It welds at a temperature that won't cause burns even if touched with fingertips, enabling continuous power supply. Since it can build up material in a "surface" rather than just a "point," it can weld quickly without sparking. Another feature is that it is difficult to miss the target because the electrode is applied directly to the welding area. It prevents shrinkage and distortion caused by heat, and there is no thermal discoloration after welding. 【Features】 〇 Uses a paste-like welding material that fuses with the base material with minimal heat 〇 Capable of continuous welding from thick to thin linear buildup 〇 Compact design for portability 〇 No preheating or post-heating treatment required

• Plastic Mould
• Other molds
• Welding Machine

Remove copper, zinc, and brass attached to the mold without any damage!

"Kuripika Ace Remover" removes only copper, zinc, and brass that are attached to metal materials such as iron, steel, and nickel without causing any corrosion or dissolution. There is no damage to the metal materials. 【Features】 - Removes only copper, zinc, and brass attached to iron, steel, and nickel just by soaking. - No damage even if the workpiece is left immersed. - No neutralization treatment required after processing. - Not subject to PRTR Law, RoHS, etc., and has excellent safety. 【How to Use "Kuripika Ace Remover"】 (For users of the dedicated cleaning machine "Kuripika Ace") - For maintenance of the cleaning tank and cleaning basket when replacing the dedicated cleaning solution. (For companies looking for a copper remover) - Removal when discoloration occurs due to copper. - Removal of copper attached to press molds. - Etching agent for copper and brass. - Removal of discoloration after wire cutting. For more details about the product and options, please download the catalog or contact us.

• Other cleaning machines
• Chemicals
• Cleaning agents

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

At construction sites, temporary parking lots may be established for workers and construction-related vehicles. On unpaved ground, mud and ruts can easily occur due to rain, which may hinder vehicle access. Hyper CLT mats are civil engineering materials that utilize wood CLT. By laying them in temporary parking lots, a suitable environment for vehicle passage and parking can be created while protecting the ground. They can be laid only in the necessary areas, and after the construction is completed, they can be removed and repurposed for temporary roads or access routes. The 5×10 panels weigh approximately 230 kg, and the 5×20 panels weigh about 460 kg, making them lightweight and easy to install and remove even with small machinery, allowing for changes in parking space. Additionally, they offer benefits unique to wood, such as glare reduction, noise reduction, and CO2 fixation. They are registered as a technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A," and can be utilized for the development of temporary parking lots and innovative public works.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.