What is a microwave?

Easy to adjust and add sensors! A microwave intrusion detection sensor that is robust in natural environments and capable of distance measurement.

The "BSS01/BSM02" is a microwave intrusion detection sensor that is highly resilient to natural environments and capable of distance measurement. Unlike conventional Doppler and infrared interruption methods, it employs FMCW technology to detect intrusions based on distance and reflection levels, thereby reducing false alarms compared to traditional methods. It complies with the technical standards certification (ARIB STD-T73) for 24GHz band specific low-power radio stations, eliminating the need for cumbersome radio station license applications during use. Additionally, it can be used both indoors and outdoors within the country. 【Features】 ■ Strong against natural environments ■ Capable of long-distance monitoring ■ Covers a wide detection area ■ Capable of detecting intrusion locations ■ Easy installation adjustments and sensor expansions ■ Reduces false alarms *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Other security
• others

Separating the surrounding environment and detection area with distance information to reduce false alarms! A short-range intrusion detection sensor that can measure distance.

The "BSS300/BSS301" is a sensor that detects intruders using radio waves in the 24GHz band. In pole monitoring, it is possible to complement the blind spots that occur at the feet of various intrusion detection sensors from above towards the ground. Microwaves are less affected by rain, snow, fog, backlighting, and other conditions, allowing for more stable monitoring even in environments where infrared sensors, image sensors, electric field sensors, and laser sensors often generate false alarms. 【Features】 ■ Strong against weather conditions such as rain, wind, snow, and fog, with high reliability ■ Not affected by temperature changes caused by swaying vegetation ■ Can be installed along walls, on top of fences, etc., without restrictions on location ■ Not influenced by surrounding reflections *For more details, please refer to the PDF document or feel free to contact us.

• Distance measuring device
• Other security and surveillance systems
• Area Sensor

Counter-terrorism measures for important infrastructure such as power plants and airports! The 3D radio wave wall reliably captures terrorists.

The "BSS20" is an intrusion detection sensor that uses radio waves in the 24GHz band. It detects intruders by blocking a detection area composed of multiple opposing transmitters and receivers. It is highly resistant to outdoor natural environments, easy to adjust during installation, and can be utilized as a counter-terrorism measure for critical infrastructure such as power plants and airports. 【Features】 ■ Strong against weather conditions such as rain, wind, snow, and fog, ensuring high reliability ■ No need for precise optical axis alignment like infrared sensors ■ Can be installed along walls, on top of fences, and in various locations ■ Forms a 3D radio wave barrier with up to 4 levels of multi-layer installation *For more details, please refer to the PDF materials or feel free to contact us.

• Sensors
• Other security and surveillance systems
• Area Sensor

Security measures for factories and equipment! Catering to various needs from easy installation to permanent setups.

The "BSS201-P1" is a sensor that detects intruders using 24GHz band radio waves. When an intruder interrupts the detection area, which is composed of a pair of transmitters and receivers, an alarm is triggered. There is no need for precise optical axis alignment like with infrared sensors, making installation adjustments easy during setup. It caters to various needs, from security measures in factories and facilities to simple installations and permanent setups. 【Features】 ■ Strong against weather conditions such as rain, wind, snow, and fog, ensuring high reliability ■ No need for precise optical axis alignment like with infrared sensors ■ Can be installed in various locations, such as along walls or on top of fences ■ Achieves easy installation through miniaturization of the sensor and simplification of the interface *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Area Sensor
• Safety Sensors

Simultaneous measurement of speed and distance! A safety monitoring sensor utilizing highly weather-resistant microwaves.

The "BFS01/BFS01-P" is a microwave safety monitoring sensor that utilizes radio waves, making it resistant to weather conditions such as rain, wind, snow, and fog. It can perform reliable measurements with minimal false detections even in harsh outdoor environments. It complies with the technical standards for 24GHz specific low-power radio stations (ARIB STD-T73), and there is no need for a cumbersome radio station license application when in use. Additionally, it can be used both indoors and outdoors in Japan. 【Features】 ■ Capable of measuring speed and distance simultaneously ■ Dustproof and waterproof, allowing for direct outdoor installation ■ Compatible with system requirements through contact output and Ethernet 　(* Speed and distance information is only available via Ethernet) * For more details, please refer to the PDF document or feel free to contact us.

• Other security and surveillance systems
• Area Sensor
• Safety Sensors

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.