Beam reflection detection method and beam interruption detection method, two detection methods of microwave.

Easy to adjust and add sensors! A microwave intrusion detection sensor that is robust in natural environments and capable of distance measurement.

The "BSS01/BSM02" is a microwave intrusion detection sensor that is highly resilient to natural environments and capable of distance measurement. Unlike conventional Doppler and infrared interruption methods, it employs FMCW technology to detect intrusions based on distance and reflection levels, thereby reducing false alarms compared to traditional methods. It complies with the technical standards certification (ARIB STD-T73) for 24GHz band specific low-power radio stations, eliminating the need for cumbersome radio station license applications during use. Additionally, it can be used both indoors and outdoors within the country. 【Features】 ■ Strong against natural environments ■ Capable of long-distance monitoring ■ Covers a wide detection area ■ Capable of detecting intrusion locations ■ Easy installation adjustments and sensor expansions ■ Reduces false alarms *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Other security
• others

Separating the surrounding environment and detection area with distance information to reduce false alarms! A short-range intrusion detection sensor that can measure distance.

The "BSS300/BSS301" is a sensor that detects intruders using radio waves in the 24GHz band. In pole monitoring, it is possible to complement the blind spots that occur at the feet of various intrusion detection sensors from above towards the ground. Microwaves are less affected by rain, snow, fog, backlighting, and other conditions, allowing for more stable monitoring even in environments where infrared sensors, image sensors, electric field sensors, and laser sensors often generate false alarms. 【Features】 ■ Strong against weather conditions such as rain, wind, snow, and fog, with high reliability ■ Not affected by temperature changes caused by swaying vegetation ■ Can be installed along walls, on top of fences, etc., without restrictions on location ■ Not influenced by surrounding reflections *For more details, please refer to the PDF document or feel free to contact us.

• Distance measuring device
• Other security and surveillance systems
• Area Sensor

Counter-terrorism measures for important infrastructure such as power plants and airports! The 3D radio wave wall reliably captures terrorists.

The "BSS20" is an intrusion detection sensor that uses radio waves in the 24GHz band. It detects intruders by blocking a detection area composed of multiple opposing transmitters and receivers. It is highly resistant to outdoor natural environments, easy to adjust during installation, and can be utilized as a counter-terrorism measure for critical infrastructure such as power plants and airports. 【Features】 ■ Strong against weather conditions such as rain, wind, snow, and fog, ensuring high reliability ■ No need for precise optical axis alignment like infrared sensors ■ Can be installed along walls, on top of fences, and in various locations ■ Forms a 3D radio wave barrier with up to 4 levels of multi-layer installation *For more details, please refer to the PDF materials or feel free to contact us.

• Sensors
• Other security and surveillance systems
• Area Sensor

Security measures for factories and equipment! Catering to various needs from easy installation to permanent setups.

The "BSS201-P1" is a sensor that detects intruders using 24GHz band radio waves. When an intruder interrupts the detection area, which is composed of a pair of transmitters and receivers, an alarm is triggered. There is no need for precise optical axis alignment like with infrared sensors, making installation adjustments easy during setup. It caters to various needs, from security measures in factories and facilities to simple installations and permanent setups. 【Features】 ■ Strong against weather conditions such as rain, wind, snow, and fog, ensuring high reliability ■ No need for precise optical axis alignment like with infrared sensors ■ Can be installed in various locations, such as along walls or on top of fences ■ Achieves easy installation through miniaturization of the sensor and simplification of the interface *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Area Sensor
• Safety Sensors

Simultaneous measurement of speed and distance! A safety monitoring sensor utilizing highly weather-resistant microwaves.

The "BFS01/BFS01-P" is a microwave safety monitoring sensor that utilizes radio waves, making it resistant to weather conditions such as rain, wind, snow, and fog. It can perform reliable measurements with minimal false detections even in harsh outdoor environments. It complies with the technical standards for 24GHz specific low-power radio stations (ARIB STD-T73), and there is no need for a cumbersome radio station license application when in use. Additionally, it can be used both indoors and outdoors in Japan. 【Features】 ■ Capable of measuring speed and distance simultaneously ■ Dustproof and waterproof, allowing for direct outdoor installation ■ Compatible with system requirements through contact output and Ethernet 　(* Speed and distance information is only available via Ethernet) * For more details, please refer to the PDF document or feel free to contact us.

• Other security and surveillance systems
• Area Sensor
• Safety Sensors

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.