[Ministry of Agriculture, Forestry and Fisheries] Rice and brown rice moisture and protein rapid measurement certification equipment!

It can be widely used in country elevators and grain processing plants.

The "GAC2500-C" is a high-precision moisture and bulk density meter for grains. Using high frequency (149mHz) that deeply penetrates the grain, it accurately measures the moisture content inside the grain. At the same time, it can measure bulk density and sample temperature. It has obtained certification from NTEP (National Type Evaluation Program) and is officially certified as a moisture meter for whole grains by GIPSA (Grain Inspection, Packers and Stockyards Administration of the U.S. Department of Agriculture) and the Ministry of Agriculture, Forestry and Fisheries of Japan. 【Features】 ■ Adopted by USDA GIPSA (U.S. Department of Agriculture Grain Inspection) ■ High-precision measurement even for high-moisture samples ■ A rich lineup of calibration curves that can accommodate a variety of samples ■ For measuring moisture in whole grain samples such as wheat, barley, soybeans, and oilseeds ■ Ministry of Agriculture, Forestry and Fisheries certification: moisture content of polished rice and brown rice, bulk density of brown rice * As of April 1, 2022, certification for bulk density in brown rice has been obtained! * For more details, please refer to the PDF materials or feel free to contact us.

• Food Testing/Analysis/Measuring Equipment

The latest model of the grain near-infrared analysis device "InfraTech," which has been introduced in over 10,000 units worldwide since its release!

"Infratec" is a grain-specific component measurement device that employs near-infrared transmission technology. As the basic model of "Infratec NOVA," it achieves excellent cost performance while maintaining measurement capabilities. It demonstrates consistent performance across various stages, from moisture and protein sorting in production sites to variety selection during breeding stages, and raw material verification and process management in processing sites. 【Features (excerpt)】 ■ Can measure whole grains ■ Standard equipped with ANN calibration curve, allowing measurement from the first day of installation ■ High-precision measurement with a new monochromator ■ Wide wavelength range (570-1100nm) ■ High calibration curve transfer performance due to unique equipment standardization technology ■ Ministry of Agriculture, Forestry and Fisheries certification: protein, moisture, and bulk density for polished and brown rice * Certification for bulk density in brown rice was obtained as of April 1, 2022! * For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Measurement can be performed without the need for preprocessing such as crushing, in whole grain form!

"Infratech Sophia" is a near-infrared component measurement device for grains equipped with a diode array measurement mechanism. The robust and compact body excels in portability, making it usable not only in laboratories but also in the field. With the standard included global calibration curves for wheat and barley, stable measurements of protein and moisture can be obtained from the day of installation. 【Features】 ■ High precision and stable grain component measurement ■ No sample pretreatment required as measurements can be taken with whole grains ■ Simple operation: just load the sample and press the start button ■ Easy to carry due to compact design ■ Check cell available for confirming the stability of the device *For more details, please refer to the PDF document or feel free to contact us.

• Food Testing/Analysis/Measuring Equipment

Event Date: October 7 (Wednesday) to October 9 (Friday), 2026 Time: 10:00 AM to 5:00 PM Venue: Intex Osaka Our company will be exhibiting at the 29th Monozukuri World Design and Manufacturing Solutions Exhibition, which will be held at Intex Osaka from October 7 (Wednesday) to October 9 (Friday), 2026. At the venue, we will showcase the upgraded "ReMacs Hybrid," as well as the eagerly awaited production management system for the precast concrete industry, "ReMacs TypePca," which will be unveiled for the first time following its release at the end of May! We will also display various solutions, including the newly equipped "AI Drawing Search System" with OCR functionality! We sincerely look forward to your visit.

In civil engineering sites, it is important to clearly communicate not only safety and workability but also "what kind of initiatives the site is undertaking." Hyper CLT mats are civil engineering mats that utilize wood CLT. They look significantly different from conventional steel plates, so when laid at site entrances, viewing routes, or material yards, they create a strong visual impact. In particular, during inspections by clients, site tours, and public open days for local residents, the use of wood, environmental considerations, and the application of new technologies can be conveyed in a "visible form." Additionally, they are lightweight and easy to install and remove, and they offer practical benefits such as reducing glare and metal noise, as well as CO2 fixation. Hyper CLT mats are registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." They combine wood, NETIS, civil engineering, and CLT, making them a new temporary material that can impressively convey the initiatives of the site.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.