DapTechnology's AS5643 interface card "FireTrac4x24bT" adopted in the F-35 project.

DapTechnology's AS5643 interface card adopted for the F-35 project.

There is a growing demand for more streamlined hardware systems for processing AS5643 data streams used for defense purposes. In particular, advanced error insertion capabilities, which cannot be achieved with commercial link layer implementations, are required for simulation purposes. FireTrac is designed to natively support AS5643 (not just as an add-on protocol). In addition to standard IEEE1394 functionality, FireTrac is designed to provide hardware-level support for SAE AS5643, particularly alleviating the burden on the host processor for tasks such as packet encapsulation, data extraction, and receive/transmit STOF offsets. Importantly, FireTrac is highly accurate as it fully processes AS5643 transmission timing in hardware. Support for this protocol is built into the hardware, rather than relying solely on a software layer as is commonly provided by other solutions that depend on COTS OHCI chipsets. ■ Technical documentation in Japanese for AS5643 is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• Expansion Boards

Analyzer package for the AS5643 avionics data bus adopted in the F-35 project.

The AS5643 I/F board comes in USB, LAN, and PCI/cPCI types. The AS5643 supports speeds of 100/200/400/800 bps. The bus analysis analyzer software FireSpy Mil1394 provides functions for Monitor, Recorder, Commander, Generator, Filter/Trigger, and Scriptor. ■ Japanese technical documentation for the AS5643 is available. If you would like to see it, please contact sales@nacelle.co.jp. Alternatively, it can also be downloaded from the catalog page.

• Other network tools

The MIL1394 repeater is a solution for cable extension.

MIL1394, like the commercial IEEE1394 FireWire, has limitations on the length of the connection cable. Therefore, to extend a 1394 connection, it is necessary to use thicker wires or add signal repeaters. DapTechnology has developed a wide variety of repeater models, offering about 25 different configurations, including simple pass-through, multi-pass-through, fiber optic conversion, and EMI-enhanced solutions. Various cable harnesses are also available, using the proven GORE FireWire cables. ■ Technical documentation in Japanese for AS5643 is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• others

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without the application of heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.