Operation of the fall prevention measures website.com

A full harness with multiple points of body support to mitigate impact.

Fall prevention equipment is used to prevent the body from falling during a "fall or drop" using ropes or straps. A full harness has multiple points to secure the body, which helps to distribute the impact when a fall occurs. It is a fall arrest device that reduces the burden on the body. 【Value Provided】 ■Preventing falls for workers ■Mitigating impact during a fall

• Other safety equipment

Lightweight and compact, making it easy to carry! It excels in situations where rescue is difficult and time is of the essence.

"Roll Grease" is a product designed for rapid emergency rescue from high places such as wind power plants, transmission towers, and commercial facilities. Generally, lifts or buckets are used for rescue from high places. However, rescues from high places without lifts or buckets are extremely difficult. Moreover, in situations where rescue is needed, time can be a matter of life and death. In urgent situations, one cannot wait for the rescue team to arrive for several tens of minutes. Our Roll Grease excels in situations where rescue is difficult and time is critical. 【Features】 ■ Easy to operate ■ Used for emergency rescue from high places ■ Lightweight and compact for easy portability ■ Descent speed is automatically controlled ■ Equipped with a wheel for winding up, used when detaching the person in need of rescue from the fall prevention system they are connected to.

• Other safety equipment

Prevents falls and allows for quick rescue in emergencies.

The manhole fall prevention and rescue system is a suitable product for enhancing safety during work in manholes and tanks. It consists of a "safety block with a winding function" that freely extends and contracts, and activates an internal locking mechanism to stop falls when an incident occurs, along with a "tripod" that can be adjusted to a maximum height of 2 meters. Please utilize it for fall prevention during manhole ascents and for emergency rescue operations when a worker loses consciousness.

• Other safety and hygiene products

Zero falls from high places such as ceilings, rooftops, and roofs!

This system eliminates the risk of falls when working at heights, such as in corridors or on rooftops. The permanently installed fall prevention lifeline system HLL, made of stainless steel wire cables and implemented worldwide, significantly enhances safety when working at heights. The permanent fall prevention horizontal lifeline system 'HLL' involves installing wire cables or rails on walls, at foot level, or overhead, allowing users to connect their lanyards to sliders that run along the cables or rails, thereby preventing falls. With a design that reduces safety risks and the load on the structures where it is installed, it can be implemented not only in new buildings but also in existing ones. Developed specifically for fall prevention, this system is designed to meet European and American safety standards regarding fall distance, impact on the human body during a fall, and impact on the roof, contributing to user safety, work efficiency, and shock mitigation upon falling onto the roof.

• Other safety equipment

We offer a variety of types! Preventing worker falls.

A lanyard is a fall protection device made of synthetic fiber rope or wire rope, consisting of hooks, D-rings, and retractors. We offer various types, including those specifically for positioning, restraint use, rope types, wire rope types, single and double attachments, and retractable types. By connecting body support (full harness, which is a fall arrest device) and anchors (safety blocks, vertical lifelines, horizontal lifelines, Flexiguard), it prevents the worker from falling.

• Other safety equipment

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites, there are many opportunities to use temporary roadways, access roads, heavy machinery work yards, and material storage areas with sheets. Until now, steel plates have been widely used, but there is a growing interest in temporary materials made from wood due to environmental considerations and CO2 reduction. Hyper CLT sheets are civil engineering CLT materials made from wood CLT. As wooden sheets, they can be used for mud prevention, ground protection, ensuring work pathways, and as a substitute for steel plates. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and reducing the burden of transportation, installation, and removal. Wood has the property of fixing CO2, and further improvements in transportation efficiency can be expected due to its lightweight nature. These materials also help improve the site environment by reducing glare and noise. In public works, they are easy to use as materials for environmental considerations, safety measures, and creative proposals, making them recommended for companies aiming to enhance site evaluations. Please consider them as a new sheet selection for civil engineering sites, registered as "TH-250021-A" in the Ministry of Land, Infrastructure, Transport and Tourism's NETIS. We can provide proposals tailored to site conditions, from public works to private civil engineering projects.

Thank you very much for your continued support. We sincerely apologize for the inconvenience, but we will be taking our summer vacation on the following dates. ■ Summer Vacation Period ■ From Tuesday, August 11, 2026, to Sunday, August 16, 2026. For details such as shipping schedules, please check our company website via the link below. Please note that we will resume normal operations on August 17. Inquiries during the vacation period will also be addressed after August 17. We apologize for any inconvenience this may cause and appreciate your understanding. Earth Power Co., Ltd.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.