Exhibition: We exhibited at Measurement Expo 2020 OSAKA.

Supports mixed gases! Equipped with standard analog output, RS-232C communication, and a backlit LCD display.

The "MCS/MCRS series" is a mass flow controller manufactured by ALICAT that can measure 128 types of gas flow, including corrosive gases and refrigerant gases, with a single unit. It achieves a fast response through a laminar flow method (differential pressure type). Equipped with a highly accurate differential pressure sensor, it measures flow rates precisely. Additionally, it includes the "MW series," which can measure with extremely small differential pressures. 【Features】 ■ 100 ms control response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Range from 0.5 SCCM to 3000 SLPM ■ Standard analog output and RS 232C communication ■ Compatible with mixed gases ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Achieving high-speed response with the laminar flow method (differential pressure type)! A wide range of models available from low flow to high flow.

The "MS Series" is a mass flow meter manufactured by ALICAT that can measure the flow of 130 types of gases, including corrosive gases and refrigerant gases, with a single unit. It provides accurate flow measurements of ±(0.8% Reading + 0.2% F.S.) and has a fast response time of 10ms, allowing it to quickly follow changes in flow. Additionally, it includes models like the "MW Series," which can measure with extremely low differential pressure. 【Features】 ■ 10ms fast response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Range from 0.5 SCCM to 3000 SLPM ■ Standard analog output and RS-232C communication ■ Standard backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

A mass flow meter that can measure with extremely small differential pressure. Achieves fast response through the laminar flow method (differential pressure type)! Current delivery time is approximately 4 weeks.

The "MW Series" is a mass flow meter manufactured by ALICAT, which can measure with very small differential pressure, resulting in minimal pressure loss, making it ideal for environments where low pressure is used. It provides accurate flow measurement of ±(0.8% Reading + 0.2% F.S.) and has a fast response time of 10 ms, quickly adapting to changes in flow. In addition, we offer the "MS Series," which supports 130 types of gases, including corrosive gases and refrigerants. 【Features】 ■ 10 ms fast response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Range from 0.5 SCCM to 1000 SLPM ■ Standard analog output and RS-232C communication ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

A mass flow controller that measures with a very small differential pressure, has very low pressure loss, and is ideal for use in low-pressure environments. Current delivery time is approximately 4 weeks.

The "MCW/MCRW series" is a mass flow controller manufactured by ALICAT, ideal for environments where low pressure is used, as it can measure with very small differential pressure, resulting in minimal pressure loss. It achieves fast response through a laminar flow method (differential pressure type). Equipped with a highly accurate differential pressure sensor, it measures flow rates precisely. In addition, we offer the "MCS/MCRS series," which supports 128 types of gases, including corrosive gases and refrigerants. 【Features】 ■ 100 ms control response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Range from 0.5 SCCM to 1000 SLPM ■ Standard analog output and RS 232C communication ■ Compatible with mixed gases ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Supports mixed gases! Standard features include analog output, RS-232C communication, and a backlit LCD display. Current delivery time is 4 weeks.

The "MC/MCP/MCR series" is a mass flow controller manufactured by ALICAT that can handle 98 different types of diverse gases with a single unit. It achieves a fast response through a laminar flow method (differential pressure type). Equipped with a highly accurate differential pressure sensor, it measures flow rates precisely. In addition, we offer a lineup that supports 128 types of gases, including corrosive gases and refrigerant gases, such as the "MCS/MCRS series," "MCW/MCRW series," and "MCV/MCVS series." 【Features】 ■ 100 ms control response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Lineup from 0.5 SCCM to 5000 SLPM ■ Standard analog output and RS 232C communication ■ Supports mixed gases ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Achieve fast response with the laminar flow method (differential pressure type)! A wide range of models is available from low flow to high flow. Current delivery time is 4 weeks.

The "M Series" is a mass flow meter manufactured by ALICAT that can measure 98 types of gas flow rates, including mixed gases, with a single unit. It provides accurate flow measurement of ±(0.8% Reading + 0.2% F.S.) and has a fast response time of 10 ms to quickly follow flow changes. In addition, the lineup includes the "MS Series," which supports 130 types of gases including corrosive gases and refrigerants, and the "MW Series," which can measure with extremely low differential pressure. 【Features】 ■ 10 ms fast response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Range from 0.5 SCCM to 5000 SLPM ■ Standard analog output and RS-232C communication ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Achieve fast response with the laminar flow method (differential pressure type)! We offer a lineup ranging from 0.5 CCM to 10 LPM.

The "LC/LCR Series" is a liquid flow controller manufactured by ALICAT that can quickly control to a specified flow rate with a response speed of 100 ms using a laminar flow method (differential pressure). It allows for the desired flow rate to be achieved in a short time. Flow rate settings can be easily operated via a front switch, and settings can also be made through analog input or communication. It comes standard with an LCD display, allowing for real-time flow rate monitoring due to its fast response speed. Standard external outputs include 0-5 VDC output and RS-232C communication. A NIST traceable inspection certificate is included as standard. 【Compatible Liquids】 Pure water, methanol, isopropanol, ethanol, ammonia, dimethyl ether, isopentane, thiophene, isooctane, heptane, acetone *Other liquids may also be compatible. 【Features】 ■ 20 ms fast response / 100 ms control response ■ ±2% F.S. flow accuracy ■ From 0.5 CCM to 10 LPM ■ Display with backlit LCD ■ Standard analog output and RS-232C communication *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Achieving fast response with the laminar flow method (differential pressure type)! A lineup is available from 0.5 CCM to 10 LPM.

The "L Series" is a liquid flow meter manufactured by ALICAT that features a laminar flow method (differential pressure type) with a high-speed response of 20 ms. It quickly follows changes in flow rate, allowing for real-time flow rate monitoring. The flow range is 50:1 from 2 to 100% F.S., with the 0.5 CCM type capable of measuring from 0.01 mL/min. It comes standard with external outputs of 0 to 5 VDC and RS-232C communication, and includes a NIST traceable inspection certificate. Additionally, we offer liquid flow controllers in the "LC/LCR Series" and a portable type with an optional battery. 【Compatible Liquids】 Pure water, methanol, isopropanol, ethanol, ammonia, dimethyl ether, isopentane, thiophene, iso-octane, heptane, acetone *Other compatible liquids may also be available. 【Features】 ■ 20 ms high-speed response / 100 ms control response ■ ±2% F.S. flow accuracy ■ From 0.5 CCM to 10 LPM ■ Display with backlit LCD ■ Standard analog output and RS-232C communication

• Other measurement, recording and measuring instruments

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.