Announcement of the addition of a high heat-resistant (+105°C) type to the 0.5mm pitch floating connector "DY series."

The operating temperature supports up to +105℃!

We have launched the new 0.5mm pitch floating connector / high heat resistance type 'DY03/04 series'. 【Features】 - Operating temperature supports up to +105°C. - Floating amount ensures ±0.5mm in the XY direction. - High reliability design with an effective mating length of 1.25mm. - Option to select with or without positioning bosses. - Available in six types with pin counts ranging from 50 to 140. - Stack heights supported are 5mm, 11mm, 12mm, 13mm, and 14mm. *Note: The 11mm to 14mm stack height types are compatible with DY1□-□□□FS□-□ for +105°C. *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

Stack height 25mm! We have developed additional variations of the high stack type.

We have developed the 'DT Series' floating connector with a 0.5mm pitch that supports high-speed transmission, featuring a stack height of 25mm. It ensures a high floating amount of ±1.0mm in the XY direction, enabling high-speed serial transmission equivalent to 8Gbps. We offer seven types of pin counts ranging from 30 to 140 pins, and by combining them with the existing receptacle side of this series, it can also accommodate a stack height of 15mm. 【Features】 - 0.5mm pitch floating connector compatible with high-speed transmission - Transmission characteristics support high-speed serial transmission equivalent to 8Gbps - High floating amount of ±1.0mm in the XY direction - High-reliability design with an effective mating length of 1.5mm - Compatible with a stack height of 25mm - Seven types of pin counts: 30, 40, 60, 80, 100, 120, and 140 pins *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

Stack height 30mm; floating amount compatible with ±1.0mm in the XY direction!

We have launched a new 0.5mm pitch floating connector compatible with high-speed transmission, the 'DT Series', with a stack height of 30mm. It ensures a high floating amount of ±1.0mm in the XY direction, enabling high-speed serial transmission equivalent to 8Gbps. We offer seven types of pin counts ranging from 30 to 140 pins, and by combining them with the receptacle side of the existing series, it can also accommodate a stack height of 15mm. 【Features】 - 0.5mm pitch floating connector compatible with high-speed transmission - Transmission characteristics support high-speed serial transmission equivalent to 8Gbps - Ensures a high floating amount of ±1.0mm in the XY direction - High-reliability design with an effective mating length of 1.5mm - Supports a maximum stack height of 30mm - Available in seven types of pin counts: 30, 40, 60, 80, 100, 120, and 140 pins *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

0.5mm pitch floating connector "DY Series"

The "DY series" features a 0.5mm pitch and a narrow pitch while ensuring a floating amount of ±0.5mm in the XY direction. Its compact size and large displacement contribute to the miniaturization of equipment. The effective mating length is secured at 1.25mm, making it a user-friendly product that boasts stable contact. Additionally, it offers the option to choose whether or not to include positioning bosses, as well as features that ensure a suction surface during automatic mounting. The floating side connector is composed of two parts: the contact section (movable part) and the soldering section (fixed side), which are connected by contacts. When the contact section moves, a load is applied to the soldering section; however, by attaching fixing brackets to both ends of the insulator, the structure is designed to reduce this load. The contact shape is compatible with SMT, and the plating is lead-free. *For more details, please refer to the catalog or feel free to contact us.*

• Other Connectors

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.