[New Product] Announcement of SS Cable Kinshichou Type 2 [Manure Pollution Countermeasures]

It is used to prevent birds from perching on overhead lines and similar structures.

- The hard needles are attached around the entire circumference of the wire (in 8 directions), so twisting does not compromise the bird deterrent effect. - With three fixed points at the one-touch fixing part, work can be done safely and easily. - The connected structure allows it to be pushed in from the side of the utility pole. - The breathable hole structure contributes to lightweight and flame resistance. - The applicable wires are low-voltage service lines: 3DV 60 sq (outer diameter 30 mm) and 100 sq (outer diameter 37 mm).

• others

It is used to prevent birds from perching on overhead lines and similar areas (mainly around the edges).

- The all-around 9-direction semi-rigid needles centered around the upper part eliminate any gaps where birds can perch. - The reverse U-shaped hinge structure and the variable left-right connection allow for easy installation on curved and twisted wires, and the semi-rigid needles also conform to the curves. - A fixed part for fall prevention is provided in the center. - It can be installed easily with a simple process of pushing the wire in, implementing fall prevention measures, and securing the terminal. - It is compatible with indirect construction methods. - It can be used on overhead wires with a finished outer diameter of 30mm or less.

• others

It is used to prevent birds from perching on overhead wires and similar structures.

- The connecting part has a rotating structure, and when a bird tries to perch, the main body rotates. - The needle is equipped with a full circle (8 directions), enhancing the bird deterrent effect. - It can be safely and easily operated with three fixed points for the one-touch fixing part (six fixed points for the two-link type). - The material used is PE, which has excellent weather resistance, and the color chosen is a gray that is less noticeable in appearance.

• others

It prevents birds from perching on handrails and armrests. Since it is made of resin, it is also easy to process.

- It can be easily cut and overlapped, making length adjustments for handrails and arm supports easy. - Due to its male-female connection structure, it can be freely connected in both vertical and horizontal directions, and its flexibility allows it to be installed on various equipment, including curved surfaces. - The material is highly weather-resistant and contains no environmentally harmful substances.

• others

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.