We will be exhibiting at the IoT & 5G Solutions Expo [Spring].

A monitoring terminal compatible with Cat.M1 that supports point activation and various operating modes, with an overload tolerance of 150% for 30 seconds during battery operation! Outdoor UPS.

As a successor to the low-power FOMA-compatible IoT terminal "DPNS series" that we have been selling, we have developed a new product compatible with Cat.M1. It inherits almost all the functions of the previous model and can be used in the fields of environmental measurement, weather observation, and various sensing applications. Additionally, we are expanding our UPS with a new series, which includes a UPS that can be used outdoors in negative environments. **Features of the Cat.M1 Compatible Monitoring Terminal** - Equipped with various interfaces including contact input - Various activation modes including contact activation - Supports eDRX functionality - The module has obtained docomo IoT certification **Features of the Outdoor UPS** - Overload tolerance of 150% for 30 seconds during battery operation - Equipped with lithium-ion batteries to reduce maintenance effort - Usable in locations with negative environments - Customizable input and output voltage *For more details, please download the PDF or contact us.*

• UPS/Uninterruptible Power Supply

For outdoor equipment BCP measures. Compact and equivalent to IP23D for waterproof and dustproof protection.

The "KT Series" is an uninterruptible power supply (UPS) that features a housing compliant with IP23D standards for waterproofing and dustproofing, along with moisture-resistant coating on the internal circuit board, making it suitable for outdoor installation. With a sleek design of 250mm in depth, it can be installed on the ground as well as on utility poles or buildings. By installing it as part of BCP measures for fisheries, livestock, and factory equipment, it enables the preservation and early recovery of pumps, displays, motors, etc., during power outages caused by typhoons, thereby contributing to the reduction of production losses. 【Features】 ■ Available in two models: lead-acid battery type and lithium-ion battery type ■ The lead-acid battery type is suitable for short-term backup ■ The lithium-ion battery type offers approximately 10 years of maintenance-free operation ■ A sunshade for direct sunlight is also available (optional) *For more details, please refer to the catalog available for download in PDF format. The "KE Series" with a rated output of 5kVA at 200V three-phase is also available.

• power supply

We will undertake contract development of products that match 100% of our customers' requests.

We provide contract development services for control devices for various industrial machinery and information communication equipment using microcontrollers. Our company has accumulated a wealth of experience, from controllers for semiconductor control devices to information communication equipment for financial institutions, and we continue to supply developed products stably over the long term. 【Product Examples】 ■ 30KW Lithium-ion Battery Charger ■ 10KW Bidirectional DC-DC Converter ■ 5KW Inverter ■ 5KW Charger ■ 1.5KW Boost DC/DC Converter *For more details, please contact us.

• Machinery and equipment installation/dismantling/relocation

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.