The permanent exhibition booth has grand opened.

Non-contact measurement method that does not hinder flow! Applicable to both air transport and free fall systems.

The "SolidFlow 2.0" is an online powder and bulk material flow meter using microwave technology. It can be used for various powders and bulk materials, accommodating particle sizes from 1nm to 10mm. Additionally, it can measure online up to a maximum flow rate of 20t/h and is applicable to both pneumatic conveying and free-fall systems. Examples of applications include measuring and controlling the supply of ferrous sulfate in blending processes (cement) and controlling the speed of screw conveyors. 【Features】 ■ Usable for various powders and bulk materials ■ Applicable to both pneumatic conveying and free-fall systems ■ Improved accuracy with stratified spectral correction ■ Process management with an accuracy of ±2-5% ■ Enhanced wear resistance through non-contact measurement *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

Demonstrating power in various fields from powders to liquids! High-precision level measurement with a unique algorithm.

We would like to introduce our "Ultrasonic Level Meter" that we handle. We offer the "KDH1200," which achieves stable level measurement with DSP technology, and the low-cost model "KDH353-A," which features an integrated sensor and control unit. Please use them according to your application. 【KHD1200 Features】 ■ Eliminates the influence of noise and unwanted reflections, enabling stable measurements ■ Can connect two sensors to one controller ■ Standard equipped with flow meter function ■ Logs recorded on microSD ■ Standard equipped with RS-485 (MODBUS) *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

It is possible to measure exhaust gas flow rate and flow volume! Measurements can be taken in dust environments up to 1000 mg/m3! When combined with a dust monitor, mass flow can also be measured!

The "STACKFLOW 400" is an ultrasonic exhaust gas flow meter that enables stable measurements through a unique measurement method. The sensor probe contains two opposing transducers, with ultrasonic pulses emitted from each transducer and detected by the other transducer. It can be installed in both vertical and horizontal piping, and can measure processes with temperature and pressure changes. 【Features】 ■ Self-diagnostic function included ■ Usable in dust environments of 0-1000 mg/m3 ■ Resolution of 0.1 m/s ■ Installable in vertical and horizontal piping ■ Can measure mass flow when combined with a dust monitor *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

Detection possible for apparent specific gravity of 0.1 or higher. Detection possible for 0.03 or higher as an option. There are no issues with adhesion or deposition at the base of the detection plate, as the sensing capability is at the tip of the vibration detection plate!

We introduce the KVX series and XV2 series of small vibrating level switches that our company handles. The "KVX series" features fewer moving parts for easy maintenance and is recommended for measuring the apparent specific gravity of difficult powders, focusing on user-friendliness. Additionally, the "XV2 series" is a level switch developed to match equipment that requires particularly compact designs. 【Features】 ■KVX Series - Adaptable to measuring substances with varying conductivity and specific gravity - Excellent pressure resistance with no sealing parts - High-sensitivity sensor that operates with an apparent specific gravity of 0.1 or higher ■XV2 Series - Achieves compactness and lightweight while maintaining performance equivalent to the KVX series - Developed to match equipment that requires particularly compact designs *For more details, please refer to the PDF document or feel free to contact us.

• Level gauges and level switches

Temperature changes are stabilized with compensation functions! It can be easily installed in various locations.

The "M-Sens2 type" is a high-frequency online moisture meter for powders and granules that measures the moisture content of various solids in real-time, allowing for optimal management of processes and product quality. It can be used for various powders and granules, measuring moisture not only on the surface but also internally. It is not affected by flow rate or color changes of the measured material. It can be used in screw conveyors, belt conveyors, drying equipment conveyors, tank bottoms, and mixing processes. 【Features】 ■ Not affected by flow rate or color changes of the measured material ■ Easy installation in various locations ■ Simple and easy calibration ■ Improved wear resistance due to ceramic adoption ■ Temperature changes compensated for stable accuracy *For more details, please refer to the PDF document or feel free to contact us.

• Viscometer
• Other measurement, recording and measuring instruments

Achieved with the adoption of ultra-high sensitivity detection circuits! Suitable for detecting the flow of powder and particles flowing through pipes and predicting blockages.

The "KFD-1" is a microwave flow sensor that detects flow without contact. It is suitable for detecting the flow of powders and particles in pipes and predicting blockages. With the power of 24GHz, it offers high sensitivity and stability, ensuring that not even a single pellet is missed. In addition, we offer a lineup that includes the "KDS-1," which can detect pinpoint contact, and the "KFD-2," which can extract minute changes in concentration. 【KFD-1 Features】 ■ Ultra-high sensitivity ■ Our unique circuit ensures that not even a single pellet is missed ■ The power of 24GHz allows it to penetrate materials like glass and synthetic resin, enabling indirect detection ■ The power of 24GHz makes it less susceptible to the effects of dirt or scale on the detection surface ■ Sensitivity adjustment allows for the detection of both minute flows and large flows *For more details, please refer to the PDF materials or feel free to contact us.

• Sensors
• Sensors

Instantaneous concentration changes won't be missed! Achieving ultra-low concentration measurement, high-speed response, and free maintenance.

The "VIEW Series" is a high-resolution and highly stable dust monitor that is less affected by dust adhesion to the probe compared to conventional triboelectric methods and traditional optical detection methods. Starting with the "VIEW370," which can be used for measuring dust concentration in various processes, the lineup also includes the "VIEW Ex800," which can measure in hazardous areas. Despite having one of the largest functionalities among dust monitors, it achieves high-speed data processing. 【Features】 ■ Almost unaffected by adhesion or dirt on the probe ■ Ultra-high sensitivity of 0.01 to 1000 mg/m3 ■ PTFE and FRP coatings can be manufactured (VIEW370・370PRO) ■ Capable of measuring high-humidity gases with a special air purge (VIEW370・370PRO) ■ Free power supply: AC 90 to 260V *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other process controls

CLT, which has been widely adopted in the construction field, is now expanding its applications into the civil engineering sector. The "Hyper CLT Mats" are civil engineering CLT products that utilize wood CLT as temporary materials. Traditionally, steel plates have been the mainstream choice for temporary roads, access routes, and heavy machinery yards. The Hyper CLT Mats introduce a new option of "wood" to that market. The 5x10 mats weigh approximately 230 kg, making them lightweight and easy to install and remove with small machinery, with a maximum capacity of 40 mats on a 10-ton truck. They also have advantages in terms of workability and transportation efficiency. Moreover, they offer added value that can only be achieved with wood, such as glare reduction, noise control, CO2 fixation, and consideration for aesthetics. This product is expected to be a new proposal for not only construction companies but also building material firms, lumber companies, and material trading companies. It is a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS, with the registration number "TH-250021-A." The use of wood is not limited to construction anymore. The utilization of Hyper CLT Mats is expanding as a new market that connects civil engineering and wood.

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.