Two-plate detection spring-type sensor bracket

It responds to production speed online and monitors the distance and position between steel cord material wires.

The SIS VISION device consists of sensors, related equipment, software, and a touchscreen. By selecting a suitable and simple number and arrangement of sensors for the customer's equipment, reliable monitoring of the full width of the code material is possible online at full production speed. ROLAND ELECTRONIC's new technology reliably evaluates wire position and density (EPDM = Ends Per Decimeter) as well as the distance between wires. - Online quality monitoring of the distance and position of steel code wires, adaptable to production speed - New high-resolution sensors realize the actual state of EPDM/EPI For more details, please contact us or download the catalog.

• Other inspection equipment and devices
• Defect Inspection Equipment

Extremely effective for detecting weld seams in pipe materials. If the pipe cannot be detected by color sensors or laser sensors, leave it to SND40.

The Roland SND40 uses a non-contact eddy current and leakage magnetic flux sensor to detect weld seams on pipes with diameters ranging from 10 to 500 mm, both ferrous and non-ferrous, as well as on metal sheet coils. The angle at which the pipe material stops rotating at the weld can be specified. 【Advantages】 ◎ Detection of weld seams that cannot be recognized by visual sensors ◎ Utilizes two technological elements: magnetic flux and eddy currents * A full circumference coil suitable for metal rods, wires, and cables is also available, accommodating a variety of materials. ★ The manufacturing of coil materials and other long materials (cables and wires) results in elongated products (metal coil materials are welded at the ends, and cable materials use joints), necessitating automatic detection of weld seams. ★ In the case of tubes, cans, or drums, automatic detection of weld seams is required along with positioning the material for subsequent processing. For example, in the case of pipe materials, there is a signal output function that stops the seam position at a specified angle in preparation for the next bending process. ★ The appropriate combination of sensors for the SND40 enables the detection of longitudinal weld seams in various metal tubes, cans, and drums, as well as the detection of end weld seams in coil materials, cables, and wire materials. ● Additional technical data and specifications can be viewed in the [Catalog Download].

• Other processing machines

Detect the position of the weld joint and output a stop signal at any angle! Compatible with pipe diameters of 500mm! The operation screen is also available in Japanese!

The "SND40" is a device that uses a non-contact eddy current and leakage magnetic flux sensor to detect weld seams in metal tubes and coil materials. It is compatible with pipe diameters up to 500mm, regardless of whether they are ferrous or non-ferrous. A significant feature is its ability to output a stop signal at a specified angle. It has a proven track record in applications such as bending machines, punch presses, hydraulic presses, welding machines, and hydroforming, primarily among automobile manufacturers that handle welded tubes. 【Features】 ■ Detection of weld seams that cannot be recognized by visual sensors ■ Not affected by surrounding lighting ■ Capable of measuring pipe diameters from 5mm to 500mm ■ Not influenced by dust, dirt, rust, or oil adhered to the surface ● For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other inspection equipment and devices

Adopted in the production line of the Daimler (Benz) factory. A variety of contact and non-contact metal double sheet detectors. Please watch the video below.

The sensors are available in various types including electromagnetic, electromagnetic eddy current, and inductive types, compatible with both ferrous and non-ferrous materials. We offer a wide range of products, from low-cost options that are easy to teach to those that can support various field buses, tailored to different applications. For ferrous materials, they can detect up to a thickness of 8mm, and for non-ferrous materials, up to 15mm. There are also products that allow for the connection of four sensors to a single controller, enhancing work efficiency and reducing costs. ※※Video available below※※ Please take a look.

• Other measurement, recording and measuring instruments

Detects weld seams and outputs a stop signal at the specified angle! Supports pipe diameters up to 500mm.

The Roland Electronic SND40 is a device that uses a non-contact eddy current and leakage flux sensor to detect weld seams in metal wires and coil materials. It has the capability to output a stop signal at a specified angle and can accommodate pipe diameters of up to 500mm, regardless of whether they are ferrous or non-ferrous materials. Additionally, by switching to inspection mode, it can also detect defects such as surface cracks. 【Features】 - Detection of weld seams that cannot be recognized by visual sensors - Supports high-speed inspection at 9.7m/s - Capable of measuring pipe diameters from 5mm to 500mm - A lineup of probes that can be used according to application needs *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other processing machines
• Other inspection equipment and devices
• Visual Inspection Equipment

We will detect weld seams of narrow steel strips (both magnetic and non-magnetic). The width of the steel strip is 5-30mm, thickness is 0.2-4mm, and the transport speed is up to 5m/s.

When supplying steel strips to a stamping press, the final end of the reel unwinding and the unwinding part of the new reel are welded together for continuous transport, but detection of the weld joint must always be performed prior to the press process. In the case of a stamping press, the most important point for automating detection is that it must be conducted while the transport repeatedly moves and stops in a short time. The Roland NS9N is the first product developed specifically as a detector for narrow steel strips.

• Other inspection equipment and devices

Weld joint defect detection device.

● It detects welding defects in pipes, wires, cables, rods, etc., using a non-contact eddy current sensor. ● It is compatible with minimum diameters of 1mm to maximum diameters of 90mm using several types of full-circle coil sensors. ● It has a resolution of 0.6mm at a material speed of 10m/s, allowing for sufficiently accurate recognition of defect locations.

• Defect Inspection Equipment

Welding seam detection device for pipes (up to 500mm in diameter), metal sheet coils, electric wires, and wires.

The Roland SND40 uses a non-contact eddy current and leakage magnetic flux sensor to detect weld seams on metal plates, both ferrous and non-ferrous, and can identify the position of welds on pipes with a diameter of up to 500mm. 【Benefits】 ◎ Detection of weld seams that cannot be recognized by visual sensors ◎ Utilizes two technological elements: magnetic flux and eddy currents * A full-surround coil that can also be used for metal rods, wires, and cables is available, accommodating a variety of materials. ● Additional technical data and specifications can be viewed from the 【Download】 section. The manufacturing of coil materials and other long materials (cables and wires) results in elongated products (metal coil materials are welded at the ends, and cable materials use joints), necessitating automatic detection of weld seams. In the case of tubes, cans, or drums, automatic detection of weld seams is required along with positioning of the material for further processing. For example, in the case of pipe materials, there is a signal output function that stops the seam position at a specified angle in preparation for the next bending process. The appropriate combination of sensors for the SND40 enables the detection of longitudinal weld seams in all metal tubes, cans, and drums, as well as the detection of end weld seams in coil materials, cables, and wire materials.

• Other processing machines
• Other inspection equipment and devices
• Visual Inspection Equipment

Diverse contact and non-contact metal double sheet detectors. There are five products ranging from compact types to fieldbus-compatible types.

The sensors are available in various types, including electromagnetic, electromagnetic eddy current, and inductive types, and can accommodate both ferrous and non-ferrous materials. We offer a wide range of products, from inexpensive ones that are easy to teach to those compatible with various field buses, depending on the application. For ferrous materials, detection is possible up to a thickness of 8mm, and for non-ferrous materials, up to 15mm. There are also products that allow for the connection of four sensors to a single controller, enhancing work efficiency and reducing costs.

• Other measurement, recording and measuring instruments

Speedy quality control! Accurately detect minor defects in metal wires, coils, and more. *Demonstrations will be held at the Comprehensive Inspection Equipment Exhibition!

The Roland Corporation's "ECT40" is a dedicated device for detecting defects in metal components (semi-finished products) such as wires, cables, tubes, and coils. It captures changes in current caused by defects like cracks and detects aspects such as "weld seam surface" and "weld volume," contributing to the efficiency of quality control. 【Features】 ■ Operable on customer PCs (compatible with Win7/Win8) ■ Wide testing frequency range (1-12,000 kHz) ■ Auto-filter that automatically follows line speed ■ Various evaluation modes ■ Inspection log software included <This product will be exhibited at a trade show! Live demonstrations will be conducted!> "7th Comprehensive Inspection Equipment Exhibition" 　Date: September 17 (Wed) - 19 (Fri), 2014 　Venue: Tokyo Big Sight (Booth: East 6 J-43) 　Website: http://www.jima-show.jp/index.html *For more details about the product, please refer to the catalog or feel free to contact us.

• Defect Inspection Equipment

Dedicated device for detecting steel wire cord defects in the tire manufacturing process.

The SIS XP developed by Germany's Roland company is a dedicated device for detecting defects in tire steel wire cord materials. This device uses magnetic detection principles to continuously inspect the condition of abnormal areas and splice sections of the steel wire cord material during the tire manufacturing process, outputting that information. It utilizes up to 16 sensors and can detect issues such as wire pull-out, overlapping, and irregularities with a maximum inspection effective width of 1120mm, as well as determining normal and abnormal splice sections based on pre-input data and outputting the results externally.

• Defect Inspection Equipment

Dedicated device for detecting steel wire cord defects in the tire manufacturing process.

The SIS XP developed by Germany's Roland company is a dedicated device for defect detection in tire steel wire cord materials. This device uses magnetic detection principles to continuously inspect the condition of abnormal sections and splice areas of the steel wire cord material during the tire manufacturing process, and outputs that information. It employs up to 16 sensors and can detect issues such as wire pull-out, overlapping, and irregularities with a maximum inspection effective width of 1120mm, as well as determining normal and abnormal splice areas based on pre-input data and outputting the results externally.

• Defect Inspection Equipment

Dedicated device for detecting steel wire cord defects in the tire manufacturing process.

The SIS XP, developed by the German company Roland, is a dedicated device for detecting defects in tire steel wire cord materials. This device uses magnetic detection principles to continuously inspect the condition of abnormal areas and splice sections of the steel wire cord material during the tire manufacturing process, and outputs that information. It utilizes up to 16 sensors and can detect issues such as wire pull-out, overlapping, and irregularities with a maximum inspection effective width of 1120mm. Additionally, it determines normal and abnormal splice sections based on pre-input data and outputs the results externally.

• Defect Inspection Equipment

From turning processing to milling processing—responding to process integration with composite machining centers C&G Systems Co., Ltd. has released the lathe module "TURNING," which realizes the "true process integration" required in the era of composite machining centers. By covering 2D and 3D milling, wire electrical discharge machining, and turning processing, "EXCESS-HYBRID II / Parts CAM" has evolved into an ALL-IN-ONE CAM system that transcends the boundaries of processing fields. The lathe module "TURNING" was developed against the backdrop of voices from the field, where the advancement of high functionality and integration of NC machine tools has led to continued reliance on interactive input and manual programming, resulting in increased man-hours, occurrence of errors, and a shortage of skilled technicians. While composite machining centers have the significant advantage of completing both turning and milling in one machine, the diversification and complexity of processed shapes have made programming advanced and intricate, necessitating measures against interference risks and efficient process design. "TURNING" achieves a reduction in programming time and stable quality reproduction, maximizing the performance of composite machining centers.

Notice of participation in the "IT Trend EXPO 2026 Spring" (the largest online exhibition in Japan) from March 3 (Tue) to March 7 (Sat). ◆ IT Trend EXPO 2026 Spring Event Overview ◆ Name: IT Trend EXPO 2026 Spring Theme: New encounters will change tomorrow's "work" Date: March 3 (Tue) - 7 (Sat), 2026 Location: Online Participation Fee: Free Registration: Please apply from the URL below Meiden VR Safety Experience Education: https://it.expo.it-trend.jp/key/xpgi2xce Safety Information Portal: https://it.expo.it-trend.jp/key/3r6vr3bw

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.

The insulating oil of old electrical equipment that has been in use for over 30 years may be contaminated with PCBs. Proper disposal is required by the disposal deadline. If you are using a vacuum tube oscillator, please check! - Transformers - Capacitors - Rectifiers, etc. Please consider updating any relevant equipment such as oscillators and hardening equipment as soon as possible. *For more details, please refer to the PDF document or feel free to contact us. ★ For inquiries by phone, please call: Osaka Headquarters → TEL: 072-991-1361 Nagoya → TEL: 052-322-1361 Tokyo → TEL: 03-5472-1361 ★ For inquiries by email, please contact: info@fujidenshi.co.jp *When calling or emailing, please mention "I saw it on Ipros." Response hours: Monday to Friday, 9 AM to 5 PM.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.