[New Release] Outdoor Installation Screw Compressor!

It can be installed in various places such as corridors, stairs, and rooftops.

Demonstrating the compressor's original performance - Avoiding overheating in summer - Selecting the optimal installation environment - Preventing reduction in air volume due to temperature rise - Not sucking in dust and oil mist from machine tools in the factory Significant reduction in installation costs - No ducts or ventilation fans needed when installed outdoors - No structural components like compressor rooms required - Easy relocation due to air cooling with a dryer - Easy expansion as it can be installed outdoors Easy maintenance - Easy cleaning of the oil cooler and aftercooler - Quick oil changes possible - Easy daily maintenance with removable large doors - Full open top cover adopted (3.7~15 kW) - Reduced issues caused by foreign substances entering the factory Improvement of the factory environment - Exhaust heat is directly released to the outside air - No impact on the factory's air conditioning from heat - Compressor noise does not echo within the factory - Cooler outside air serves as the air source, increasing compression efficiency Abundant options - Suitable for use in cold regions - Supports pressure changes and different voltages - Remote operation from indoors

• Pneumatic Equipment

■Inverter + Purge Unloader + Automatic Stop ■Achieving Class NO.1 Air Volume

■ ACCS + Purge Unloader + Automatic Start/Stop ■ Achieving Class No.1 Air Volume 1. Touch panel operation panel adopted (22E(D) to 75E(D)) A 5.7-inch full-color touch panel with excellent visibility is used. Real-time operating status and visual display system diagrams allow for confirmation of conditions. Additionally, checking and changing operation records, alarm history, and various settings is easy. 2. Remote monitoring system [Optional] A communication unit is attached to the compressor, allowing operational information to be stored on a remote monitoring server using mobile phone lines. This enables understanding of operational status through daily condition monitoring and identification of issues in the surrounding environment, facilitating optimal operating methods and energy-saving improvements. ■ Check information on a computer or smartphone Various information and conditions of the compressor can be displayed and checked on a computer or smartphone screen at any time. 1. Display of abnormal history Accumulation of abnormalities and alarms displayed as a list. 2. Easy-to-understand status display Compressor information and conditions are displayed simply and clearly. 3. Graph display Daily operational status is displayed in graph form. 4. Operating time management Start time, end time, discharge temperature, etc., are displayed.

• Pneumatic Equipment

■ ACCS + Purge Unloader + Automatic Start/Stop ■ Achieves Class No. 1 air volume

1. Adoption of Touch Panel Control Panel (22E(D) to 75E(D)) A 5.7-inch full-color touch panel with excellent visibility is used. It allows for real-time monitoring of operating conditions and visual display of system diagrams, enabling confirmation of various situations. Additionally, checking and changing operation records, alarm history, and various settings is easy. 2. Remote Monitoring System [Optional] A communication unit is installed on the compressor, which accumulates operating information to a remote monitoring server using mobile phone lines. By monitoring daily conditions, it is possible to grasp the operating status and identify issues related to the surrounding environment, thereby reducing compressor downtime and considering optimal operating methods and energy-saving improvements. ■ Check information on a computer or smartphone You can display and check various information and conditions of the compressor on your computer or smartphone screen at any time. 1. Display of Abnormality History Accumulates abnormalities and alarms and displays them as a list. 2. Easy-to-Understand Status Display Displays compressor information and conditions in a simple and easy-to-understand manner. 3. Graph Display Displays daily operating conditions in graph form. 4. Operating Time Management Displays start time, end time, discharge temperature, etc.

• Pneumatic Equipment

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.