Webinar: "The Road to ATEX - From Prototype to Final Certification"

Add-on module for explosion vents that can reduce hazardous areas.

TARGO-VENT limits the opening angle of explosion vents to protect people, vehicles, and buildings. While providing optimal protection against explosions, it allows for a reduction in hazardous areas and ensures a wider usable workspace. 【Benefits of Use】 ◆ Reduces the area required for explosion safety in front of the vent, leading to productive use of valuable work areas. ◆ The area needed for explosion venting is smaller than when using deflectors. ◆ Enables infrastructure protection at a low cost. ◆ Ensures safe routes for people and vehicle passage while achieving a reduction in the required explosion safety area. ◆ Modifications using TARGO-VENT enhance the safety of existing facilities. ◆ Using stainless copper eliminates maintenance needs and ensures a long lifespan.

• Other machine elements
• others

Frame-less explosion vent for dynamic vibrating machines such as vibrating screens.

【Lightweight and High Dissipation Efficiency】 The Q-Ball S type guarantees safe indoor explosion dissipation within the operating area. It effectively cools the interior of the Q-Ball S type, preventing the effects of flame propagation and explosion pressure. The Q-Ball S type can accommodate up to 265 bar*m/s (Kst value) and is a frameless explosion dissipation outlet specially developed and customized for plant components with high dynamic requirements for vibration and oscillation. With its specially designed lower structure and minimal output-to-weight ratio, the Q-Ball S type can be directly mounted onto vibration systems. By applying the newly developed spherical extinguishing efficiency, there are no costs incurred for modifications or changes. The Q-Ball S type guarantees maximum dissipation efficiency while minimizing the required dissipation area.

• Other machine elements
• others

Explosion venting port resistant to low to medium vacuum and pressure fluctuations.

The dome-shaped single-layer explosion vent type EDP is suitable for use in processes involving medium vacuum or overpressure (up to 70% of the minimum pressure (Pstat) when the explosion vent is open), as well as some pressure fluctuations. It is mainly suitable for air-filled devices, filters, cyclones, and containers that operate under strong vibrations. The standard burst pressure is 0.1 bar (22 °C). 【Mechanism】 As the pressure increases, the explosion vent will rupture at the designated rupture point at the specified pressure, releasing the pressure and flames from within the container or device to the outside.

• Other machine elements
• others

Reliable protection against gas explosions enables frameless vents without costly modifications such as creating openings in walls.

★ Reliable Protection Against Gas Explosions Are you looking for an economical solution to mitigate gas explosions without emissions and without complex additional equipment like catch baskets? That's exactly what Q-Rohr G can offer. With quick installation and minimal dimensions, it can adequately protect the system, peripheral equipment, and environment from the effects of gas explosions. You can quickly resume production even after an explosion. You only need to replace the explosion vent. Meanwhile, the Q-Rohr itself only requires refurbishment after three explosions. ▶ Mechanism Flame gases reaching up to 1,500°C are very efficiently cooled at the entrance of a special stainless steel mesh filter developed by REMBE. This reduces the amount of gas emitted and helps to quell the explosion.

• Other machine elements
• others

Economic shutdown of filters, dust collectors, and raw gas lines.

**Application** In the event of an explosion, the Q-Flap RX explosion isolation flap valve effectively protects plant components in almost all industrial sectors. Additionally, the Q-Flap RX is ideal for suction lines of filter dust collectors and intake lines of mills. Piping with a nominal diameter of DN400 is primarily used in decentralized extraction systems in the pharmaceutical and chemical industries, while piping with nominal diameters from DN450 to DN710 is used in centralized dust collectors in the grain and food industries. Piping with nominal diameters from DN800 to DN1250 is used in the wood and heavy industries. To meet the highly diverse demands of various industries, the Q-Flap RX product range offers three design versions. Products up to nominal diameter DN710 are equipped with inspection flaps, while products above that size feature a modular design. This allows for easy maintenance and servicing for any pipe size.

• Other machine elements
• others

With Q-Rohr, we provide the best possible explosion safety guarantee while using the optimal layout for your production facility.

Safety and operational efficiency can coexist. Q-Rohr enables explosion venting without flames or dust in a sealed indoor environment. There is no need for complex ducting and the associated rearrangement of production equipment for outdoor venting. With Q-Rohr, we provide the best possible explosion safety guarantee while utilizing the optimal layout for your production facility. Furthermore, Q-Rohr is also very advantageous in terms of running costs. By eliminating vent ducts, you can save not only on installation costs but also on maintenance and upkeep expenses. ▶ Applications Q-Rohr is ideal for indoor installations where there is a risk of dust or gas explosions. It offers a wide range of flexible installation options, so many new plants are directly equipped with Q-Rohr. Modifications are also easily possible. Q-Rohr can be used to protect filters, dryers, and cyclones, and is applicable for gases, hybrid mixtures, metal dust, molten dust, fibers, and more. ▶ Mechanism Flame gases reaching up to 1,500°C are cooled very efficiently within a specially developed stainless steel mesh filter inlet by REMBE. This reduces the amount of gas discharged and helps to quell explosions.

• Other machine elements
• others

Yamawa Manufacturing Co., Ltd. will exhibit at "JIMTOF 2026, the 33rd Japan International Machine Tool Fair," which will be held at Tokyo Big Sight from October 26 (Monday) to October 31 (Saturday), 2026. We will be showcasing two new products from our highly acclaimed ultimate professional tool "Z-PRO," optimized for machining! Don’t miss this opportunity to visit our booth. 【Highlights】 We will display two new products from the "Z-PRO" brand. We have prepared many short videos to solve tapping troubles! We will thoroughly explain examples of failures and successes in tapping. Live demonstrations using the precision tapping machine 'TTTsystem' will be available.

[Speaker] Masanori Hayashi Evangelist, NTT Docomo Business, Inc. Visiting Researcher, GLOCOM, International University [Key Lecture Content] The application areas of AI are expanding from generative AI to AI agents and physical AI, while the main battlefield of AI infrastructure is shifting from learning-centric to inference-centric. Against the backdrop of rapidly growing AI demand, investments and entries into AI data centers by various businesses are accelerating. However, new challenges are emerging, such as increasing power and cooling demands, responses to data sovereignty, and the utilization of GX strategy regional systems for data center aggregation. This lecture will overview the latest trends in the AI data center market and investment trends, as well as organize technological innovations such as GPUs, liquid cooling, and all-optical networks, along with policy and institutional trends and industrial challenges. Furthermore, it will envision the future of a decentralized AI infrastructure that connects AI factories, data centers, and the edge, and discuss new industrial foundations and future competitive axes through watt-bit collaboration.

[Speaker] Ren Taro Hayashi, Senior Manager, Environmental, Energy, and Resource Strategy Group, Research and Consulting Division, Japan Research Institute, Ltd. [Lecture Items] 1. Overview of Data Centers 2. Impact of Data Centers on the Power Industry 3. Policy Trends in Data Centers and Power (1) GX2040 Vision (2) Watt-Bit Collaborative Public-Private Discussion (3) GX Industry Location Working Group (4) Japan Growth Strategy 4. Future Approaches to Power Procurement for Data Center Development 5. Q&A / Business Card Exchange

This year, we will be holding the large exhibition "Wood and Living Expo" organized by Nice! Approximately 150 domestic housing and building material manufacturers will gather to showcase the latest equipment and noteworthy new products. Additionally, many specialized seminars will be held to learn about the latest industry trends and future outlooks! It will be a two-day event filled with business tips and seeds for new proposals. We sincerely look forward to your visit. ■ Dates: October 15, 2026 (Thursday) 10:00-17:00 October 16, 2026 (Friday) 10:00-16:00 ■ Venue: Pacifico Yokohama, Hall C&D ■ Organized by: Nice Co., Ltd., Wood and Housing Research Association, and the Trustworthy Renovation Promotion Association ■ Official website: https://woodlivingfair.jp/ ■ Pre-registration: https://www.tenjikai-uketsuke.com/form/wood-living-expo-2026/ *Pre-registration is required for attendance. When registering, please select "R&D Center" as the Nice department.

In November 2025, the revised "Good Manufacturing Practice (GMP) for Medical Devices" in China will be announced, with implementation scheduled for November 2026. Local experts will provide a clear explanation of the key points for compliance. < Seminar Topics > - Overview of China's new GMP - Differences from ISO 13485:2016 - New requirements that require particularly careful measures - Anticipated inspection styles