A reading session for the internal study group "Philosophy and Management" was held at TechnoTaiyo on Facebook in May 2021!

38 years of experience and achievements! Introducing examples of machining processes applied to aluminum, iron, lost wax, and more.

This document introduces examples of machining and tapping processing performed by Techno Taiyo. We handle additional processing of castings, die-castings, and lost-wax castings for parts of single-axis robots, medical devices, industrial equipment, and ship components, as well as machining from solid materials. We specialize in small items, square items, and irregular shapes, particularly those measuring 100x100x100 mm, and we can accommodate weights of up to 20 kg. 【Examples of cases (partial)】 ■Material: A5052 ■Size: t27x41x80 ■Lot: 20 pieces ■Surface treatment: Hard anodizing *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools

We will provide products and services that will satisfy you as a partner!

In "Precision Cutting Processing," we handle materials such as aluminum, stainless steel, iron, and brass, including "machining from solid materials." Additionally, we can provide a consistent service from mold production to completion, including "additional molded products (such as die casting)." To ensure product quality control and assurance, we have established an inspection room equipped with three-dimensional measuring instruments and various inspection devices and gauges. 【Features】 ■ Utilization of design and development know-how accumulated over many years ■ Support from the early stages of development ■ Rationalization for mass production ■ Numerous machining centers and NC lathes installed ■ Quality control and quality assurance For more details, please refer to our catalog or feel free to contact us.

• Processing Contract

If you are having trouble with the manufacturing and procurement of wire products! The minimum is φ1, and we currently have a track record of up to φ10.

At our group company, Vinatech (Vietnam), we specialize in the manufacturing of stainless steel wire products for kitchen and bathtub items at our own factory. In particular, 80% of our customers are from Japan, and we have a track record of supplying to major manufacturers. If you are having trouble with managing important dimensions after bending and welding, or with the appearance condition (burrs, post-welding finish), please feel free to consult us. 【Processing Achievements】 ■ Main wire diameter sizes: φ3 to φ6 ■ Minimum: φ1 ■ Maximum: φ10 (currently) *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing

Snap into place for easy measurement! A new design protractor that prioritizes ease of use.

The "Kachikachi Goniometer" is a new type of goniometer that allows for easy and accurate measurement with one hand by incorporating groove processing every 5 degrees and an incline on the side of the main axis. Previous measuring instruments often moved when looking at the scale, making measurements time-consuming. However, this product stops firmly at every 5 degrees, allowing for smooth measurements and reducing the burden on patients. Additionally, by using aluminum material, we have achieved over 50% weight reduction. It is easy to use with one hand and has excellent durability. Please try this goniometer that pursues ease of use like never before. 【Features】 ■ Stops firmly every 5 degrees ■ Easy to open and close with one hand ■ Improved operability with 50% weight reduction ■ Increased strength for outstanding durability ■ Simple design with easy-to-read scale *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Value provided by the structural design capabilities of mechanical mechanisms! A design that requires no power, ensuring safe and easy repairs and maintenance.

Our company provides research and development support with our unique structural design capabilities cultivated through labor-saving machinery. The benefits we offer include "labor-saving, functionality, safety, and convenience." Examples of our in-house design and manufacturing include a nut automatic riveting machine and a reciprocating motion durability testing device, among others (including in-house equipment). Our design eliminates the need for a power supply, enabling safe and easy repairs and maintenance. 【Examples of Products】 ■ Vibration-damping dampers for wooden houses ■ Oil dampers for wooden training machines ■ Oil dampers for training machines with load adjustment functions ■ Angle gauges for human joints ■ Boccia ramps ■ Anchors for tents ■ VR walking devices *For more details, please refer to the PDF materials or feel free to contact us.

• Other contract services

Consistent production and bulk contracting! Are you having trouble sourcing discontinued machines, equipment, and parts?

At Techno Taiyo Co., Ltd., we offer contract manufacturing of machines, tools, and parts. If you are having trouble because the machines, tools, or parts you have been able to procure are discontinued or the suppliers have gone out of business, please feel free to contact us. We are professionals in equipment design, parts processing, and equipment assembly. 【Features】 ■ If you have the actual item, we can take measurements and suggest materials, and we can manufacture the same item. ■ If you do not have the actual item, we can create drawings and manufacture based on rough sketches and after hearing about the intended use and necessary functions. ■ Production quantity: from a few pieces to several thousand (we select the most suitable manufacturing method according to the annual required quantity). ■ Consistent production from design to delivery, with a single contract. ■ No drawings? No problem! *For more details, please refer to the PDF materials or feel free to contact us.

• Mechanical Design
• Contract manufacturing

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.