Marpos EV Virtual Showroom Now Open!

Achieve high-precision non-contact measurement in seconds <Test measurement of workpieces available (please inquire)>

OptoFlash achieves high-precision measurements by acquiring and analyzing optical images. It enables fast and accurate measurements in production environments of small parts where high precision is required, such as in automotive, general manufacturing, aerospace, and medical fields. It is particularly suitable for dimension verification of electric motor shafts, electronic connectors, hydraulic circuit components, screws, and more. <Main Features> 1. Ultra-fast - The 2D optical technology enables a reduction in cycle time. - The cycle time is remarkably fast, executing 100 static measurements in just 2 seconds. 2. High flexibility - Capable of measuring a wide variety of shapes, from bolts to small shafts. - Achieves static and dynamic measurements of outer diameter, length, roundness, cylindricity, coaxiality, taper, grooves, chamfers, R (shape), shaft runout, screw dimensions, etc., in just a few seconds. 3. Ease of use - The measurement screen is user-friendly while equipped with multi-level access features, allowing level settings according to the operator's tasks and permissions. - Open loading without doors enables robot compatibility, allowing for automation without the need for an operator. 4. Durability - The fixed position of the 2D sensor eliminates mechanical stress. Measurement performance remains consistently stable over millions of cycles. - The need for maintenance is also minimized.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices
• Optical Measuring Instruments

Supports on-site productivity with a superior balance of measurement performance, speed, and versatility.

OptoQuick captures and analyzes optical images to measure various workpieces such as cams, cranks, gears, and drive shafts with high precision and in a short time. <Main Features> 1. High Speed and High Precision - Achieves accurate and stable high-precision measurements in seconds using cutting-edge image processing technology. 2. High Flexibility - Capable of measuring various parts with a single unit, allowing for the production of different workpieces in the same manufacturing area. - Excellent operability, with measurement results that are easy to understand, enabling efficient and rapid work. 3. Multi-Sensor - In addition to optical sensors, it supports measurements of various shapes such as holes, shaft runout, cams, and half-strokes using three types of contact sensors. - Combining contact and non-contact technologies creates significant synergies. 4. Improved Workability - By installing it right next to the manufacturing machine, it reduces unnecessary time spent on moving and verifying parts. - Easily accommodates new parts by simply adding configuration files.

• Other measurement, recording and measuring instruments

We provide a comprehensive solution specialized in functional testing and EoL (End of Line) testing for various types of electric motors.

We handle "Test Systems for Electric Motors." To maintain the high quality of electric motors, which consist of rotors and stators, it is necessary to apply technical methods used in the production process for measurement and inspection. The product lineup from e.d.c. includes systems customized for inline and offline testing that enable various electrical tests during the development and manufacturing stages of electric motors and their components, allowing for the detection of insulation failures. 【Product Lineup】 ■ Stator testers for production lines (winding and hairpin) ■ Test benches for various types of rotors: permanent magnet, re-skewed, and direct winding ■ Automatic EoL motor testers with LOAD/NO LOAD testing ■ Motor load testing and lifespan simulation cycles for laboratories ■ Advanced winding and insulation quality analyzers for laboratories *For more details, please refer to the PDF materials or feel free to contact us.

• Other motors
• Other Auto Parts
• Testing Equipment and Devices

Improving product quality and reducing waste! The quality and process capability of molded products can be verified through printed reports.

"QUADRALINE.XY" is an inline management laser system for rolled/extruded products with a rectangular cross-section. It is based on a two-axis laser gauge installed on the machine, measuring the external dimensions of the product along two directions at 90°. This method allows for the measurement of both height and width along the axis of the rectangular cross-section of the product. Additionally, the "Quadraline.XY software" is preloaded within the Xactum gauge, and thanks to its modular structure, it can meet all operational requirements. 【Features】 ■ Non-contact measurement enabled by laser technology ■ 100% tolerance checks through online applications ■ Significant material savings: production within tolerances through control ■ Automatic control functions help reduce labor costs ■ Improved product quality and reduced waste *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Shorten cycle time! A versatile and easy-to-use optical interference measuring instrument designed for convenience.

The "NCG" is a thickness measurement device using optical interference technology. It calculates and measures the thickness of layers through the interference caused by the reflection of light waves at the joint surface of the workpiece. It is designed to manage the thickness of different materials such as glass, plastic, and silicon wafers. This product can be connected to various machines, allowing for high-precision and high-speed management of component thickness, and can be used in dry or wet environments within the specified limits of the specifications, either on the machine or inside the machine. 【Features】 ■ Guarantees processing accuracy within the desired tolerance ■ Reduces cycle time ■ Control for maintaining stable production under controlled conditions ■ Compensation for mechanical variations ■ History of measurement results *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Optical Measuring Instruments

The hyper CLT flooring has an appeal that is difficult to convey with just the numbers in the catalog. It is a lightweight wooden flooring made using CLT, with a 5×10 panel weighing about 230 kg. Because it is relatively lightweight, it is easy to install, remove, and relocate on-site, and its ease of handling becomes more apparent when actually used. Additionally, the heat reflection and radiant heat during summer, as well as the metallic sounds from vehicle traffic, are points where you can easily notice the differences compared to traditional steel plates. By trying it out in a few specific locations such as temporary roads, delivery routes, and heavy machinery work yards, the unique characteristics of wooden flooring become evident. Furthermore, the hyper CLT flooring is registered as a technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." It can also be an option when considering new technologies for civil engineering sites. Wooden flooring, NETIS, civil engineering, CLT. The hyper CLT flooring is a lightweight wooden flooring that has value that can only be understood through use.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

In projects directly managed by the Ministry of Land, Infrastructure, Transport and Tourism, the use of new technologies is generally required. Therefore, in future civil engineering sites, it is important not only to consider "whether to use new technologies," but also how to select and utilize technologies that are suitable for the site. One of those options is the "Hyper CLT Board," a wooden lightweight mat that utilizes CLT. It can be used as a wooden mat for temporary roads, access routes, and heavy machinery work yards, and the 5×10 board weighs approximately 230 kg, making it relatively lightweight. In addition to ease of installation, removal, and relocation, it features suppression of glare and metallic sounds, as well as environmental considerations through the use of wood. Furthermore, it can be incorporated into proposals for the utilization of new technologies as a **NETIS registered technology by the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** NETIS, new technologies, civil engineering, CLT. As public works change, the Hyper CLT Board offers a new option of wooden lightweight mats to the site.

Tokyo, October 16, 2026 - (JCN Newswire) - Global fintech company Bercor has officially announced today the launch of its next-generation financial technology platform brand "BeHive" and revealed plans for a roadshow targeting the Asian market, titled "BeHive Connect 2026 by Bercor." Scheduled for October 2026, this roadshow will showcase Bercor Group's next-generation financial infrastructure and technology deployment plans in key regions of Asia, sharing a vision for building interconnected financial platforms. The Bercor Group has completed its EU trademark applications (BERCOR word mark: No. 019417939, Bercor logo: No. 019418002) to enhance the protection of its brand assets, backed by its unique payment infrastructure technology. The "BeHive" being unveiled is a consumer-oriented user interface (UI) platform currently under development, aimed at achieving efficient linkage between digital assets and fiat currency infrastructure.

Hello! This is Japan Kernel System. Here in Kansai, the signs of autumn are deepening, and it has become a pleasant season with cool winds. In line with the fruitful autumn, we bring you news of achievements in evaluation and development. Please read Issue 55 of the Epsilon Newsletter. ─▼───────────────────────────────────── Table of Contents [1] Added Perovskite Simulation Function! [2] Efficiency Evaluation of Power Conditioners Using Test Facilities [3] Editor's Note ─▲───────────────────────────────────── You can find more on our company website.