Exhibiting at the JASIS WebExpo 2021-2022!

Compact yet high-performance, achieving efficient environmental testing through networking.

The bench-top size constant temperature and humidity chamber, a compact environmental testing device, offers genuine environmental testing performance despite its small size. It features a combination of temperature (humidity) ranges and capacities (22.5L and 64L), with a type that has a temperature change rate of 5.0℃/min, resulting in a total lineup of 12 models. The controller is equipped with a color touch panel, enhancing operability and visibility.

• Printed Circuit Board
• Sensors
• Dedicated IC

Added a new "tip heater type" with a temperature change rate of 100°C/min to streamline the temperature characteristic evaluation of semiconductors and electronic devices.

A chamberless system that sprays air adjusted to temperatures ranging from -40 to +180°C, streamlining testing processes. It can be utilized in combination with various measuring instruments and analysis devices for temperature characteristic testing, failure analysis, and quality testing of semiconductors and electronic devices. 【Features】 ■ Improved Testing Efficiency The advanced heater type has a temperature change rate of 100°C/min (air temperature) and reduces the time for temperature cycling and thermal shock testing by compactly enclosing the sample with an attachment at the nozzle tip. This significantly reduces power consumption. ■ Flexibility The advanced heater type allows the nozzle to be positioned exactly where needed using a horizontal and vertical multi-joint arm. The rear heater type employs a flexible hose, enabling the nozzle to follow the movement of the sample or evaluation device. ■ Testing without a Chamber or Door Using a dedicated attachment, it is possible to cool and heat the sample without any obstructions such as observation window glass or metal from a constant temperature chamber. This enables the evaluation of various in-vehicle sensors, including image sensors (cameras) and millimeter-wave radar, as well as combined evaluations with 3D deformation strain measurement systems and infrared thermography, and non-destructive internal observation of secondary batteries, semiconductors, and printed circuit boards in combination with X-ray transmission devices.

• Testing Equipment and Devices

Check driving conditions from remote offices or home! You can manage the surroundings of environmental testing devices all at once.

By simply connecting to the intranet, you can monitor the operational status of environmental testing equipment at a glance from your home using a web browser, and remote operation is also possible. This enables test management during telework. ■ From a distance, you can check the operating status of multiple testing devices and in-tank samples. * Note that a separate in-tank monitoring camera is required to check in-tank samples. * For more details, please refer to the PDF document or feel free to contact us.

• Process Control System
• CTI Support Center

To shorten the development lead time and improve reliability of the product.

"HALT/HASS" is an evaluation system designed to detect product weaknesses in the early stages of the product development/design process and to quickly eliminate potential defects within a short period. Originally conceived in the United States in the 1980s, it has been adopted in various industries, particularly in Europe and North America, for quality assessment in aircraft, automobiles, medical devices, and more. By applying "strong stress" to products, weaknesses can be detected quickly, and through repeated improvements and modifications, product quality can be enhanced, enabling front-loading in quality evaluation. 【Features】 ■ Realization of robust design ■ Optimization of design margins ■ Achievement of front-loading ■ Wide temperature range: -100°C to +250°C ■ Rapid temperature change: over 60°C/min ■ 6 degrees of freedom vibration *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Total support! You can conduct ideal stability tests that comply with ICH stability testing guidelines.

Our "Stability Testing Room, Stability Testing Equipment, and Low-Temperature Constant Humidity Chamber" enable ideal stability testing in compliance with ICH stability testing guidelines. Validation is necessary to ensure the quality of pharmaceuticals. At Espec, we provide total support, including validation, along with our stability testing equipment. 【Features】 ■ Guarantees "±1℃/±5%rh" - Also meets "±1℃/45%rh at 40℃/75%rh (CSH-HG, CWH) ■ Vacuum insulation adopted - Reduces the influence of external temperature (CSH-HG) ■ Area temperature and humidity control - Corrects and controls the temperature difference from the set value - Achieves high-precision temperature and humidity distribution within the testing room (CWH) *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We leverage our years of experience and achievements to provide comprehensive support for our customers' reliability testing.

At Espec, we have not only been involved in the sale of environmental testing equipment but have also conducted research on environmental testing and developed testing methods for many years. Leveraging our extensive experience and achievements, we undertake reliability testing for our customers, from the design of tests to evaluation and analysis, as well as improvement proposals based on evaluation results, either as individual processes or as a total service. Additionally, we have a new lineup of environmental testing equipment, allowing us to respond to various testing needs based on customer requirements. 【Features】 ■ Test design including surrounding systems (consulting) ■ Publicly recognized testing laboratory ■ Years of experience and achievements ■ Comprehensive support for customer reliability testing *For more details, please refer to the PDF materials or feel free to contact us.

• Other contract services

The test environment of IEC60068.2.66 created by temperature, humidity, and pressure conditions.

The high-acceleration life test device is equipped with functions centered around bias tests that apply a constant voltage or signal. A two-tier type that secures double the capacity in a single installation space is also available. It can accommodate simultaneous testing under different conditions and an increase in processing volume.

• Capacitor
• Other electronic parts
• Dedicated IC

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

[Speaker] Hajime Hiraki, CEO of Chemistry Cube Co., Ltd., Innovation Consultant [Key Lecture Content] Until now, in many companies, managers who operate and manage organizations and specialists in specific technical fields have been established as the career paths for engineers and researchers. However, as uncertainty increases, there is a growing demand for value creation capabilities that anticipate societal challenges and customer needs and generate innovation. In this context, the importance of a new career path, "Technical Leader," distinct from traditional managers and specialists, is on the rise. In this lecture, we will focus on the "Technical Leader," who plays a central role in value creation centered on technology, and explain their role, the required abilities, and the approach to their development, using case studies. [Lecture Items] 1. The Era of Technical Leaders 2. What is a Technical Leader? 3. Practicing Technical Leadership - Management Techniques for Technical Leaders 4. Development of Technical Leaders 5. Q&A / Business Card Exchange

[Lecture Topics] 1. Smart City Policies by the Cabinet Office Yusuke Nakamura, Planning Officer, Cabinet Office, Science and Technology Innovation Promotion Secretariat 1. Policy Positioning of Smart Cities 2. Smart City Policies of the Cabinet Office 3. Revision of SCRA 4. Q&A / Business Card Exchange 2. Digital Policies of the Ministry of Internal Affairs and Communications Promoting Community DX Tatsuhiko Saruta, Deputy Director (Smart City and Subsidy Projects), Digital Economy Promotion Office, Information and Communications Bureau, Ministry of Internal Affairs and Communications 1. Current Status and Challenges of Local Communities 2. Expected Roles of Digital Technology and Strategies for Problem Solving 3. Status of Initiatives in FY R7 by the Ministry of Internal Affairs and Communications 4. Future Initiatives 5. Q&A / Business Card Exchange 3. Initiatives for Promoting Smart Cities by the Ministry of Land, Infrastructure, Transport and Tourism Masahiro Kobayashi, Planning Specialist, Digital Information Utilization Promotion Office, International and Digital Policy Division, Urban Bureau, Ministry of Land, Infrastructure, Transport and Tourism 1. Initiatives to Promote the Spread of Smart Cities 2. Urban Development DX and Project PLATEAU 3. Q&A / Business Card Exchange

[Speaker] Toru Kumagai, Journalist from Germany [Lecture Topics] 1. The German government holds a summit meeting to support the automotive industry 2. Will the EU change the ban on new internal combustion engine vehicle sales by 2035? 3. The main players at the Munich Auto Show IAA Mobility are China and BEVs 4. The strategy of Chinese OEMs steadily expanding their foothold in Europe 5. Reasons for the recovery of new BEV registrations in Europe by 2025 6. Is the hollowing out of the German automotive industry progressing due to Trump tariffs? 7. Q&A

We will be exhibiting at "BioJapan 2025." We would like to invite you to visit our booth. All of our staff are sincerely looking forward to your visit. ■ Booth Number: D-69 ■ Exhibitor Website https://biojapan2025.jcdbizmatch.jp/Lookup/jp/Member/u0?ke=%E9%96%A2%E6%9D%B1%E5%8C%96%E5%AD%A6&np=2&ob=1&ub=1 ■ Exhibition Content: Manufacturing services for cell culture media and preparation solutions, reagents related to regenerative medicine (such as the ciKIC series), reagents related to cell assays (such as the ad-MED Vitrogel series), etc.