Update: JIS Z 0232 Vibration Test Case Collection

The selection will be made with reference to the general provisions of JIS Z 0200 regarding test levels and vibration duration.

"JIS Z0232 (Vibration Testing Method)" is a testing method used to evaluate the vibration resistance of the contents or packaging of packaged goods that are subjected to vibrations during the distribution process. Our company conducts various vibration tests in accordance with different standards for packaged products, as well as sinusoidal resonance detection vibration tests to explore the resonance points of the products themselves, and durability tests to confirm product strength, all for diverse purposes. If you wish to conduct a test, please feel free to consult with us. [Vibration Conditions] ◇ Random Vibration Test - Acceleration RMS Value: 0.604Grms - Frequency: 2-200Hz ◇ Sinusoidal Sweep Vibration Test - Acceleration: 7m/s² - Frequency: 3-100Hz - Sweep Speed: 1/2oct/min

• Vibration Testing

Based on the content of ISO 4180, this is a testing method for evaluating the packaging of packaged goods against vibrations, drop impacts, and compression during the distribution process.

The document consists of two parts: the main body and the annexes. The main body is created based on ISO 4180, with technical content modified to reflect Japan's unique circumstances, while Annexes A and B are presented without changes to the content of ISO 4180: 2009. (Currently, ISO 4180: 2019 has been issued, so it is recommended to refer to the latest version for the application of Annex A unless there are special reasons.) ▼ For more details, please download the PDF materials. (Recommended) ▼ If you need immediate assistance, please contact us using the "Contact Us" section below.

• Impact Test

It is also possible to capture the behavior of the product and the deformation of the cushioning packaging in as little as 1/2000 of a second for visual confirmation through video.

"JIS Z 0202 (Drop Test Method)" is a testing method used to evaluate whether packaging goods and containers made of metal, wood, cardboard, paperboard, plastic, or combinations of these materials are appropriate. The testing methods include three types: "Vertical Free Fall Test" using a free fall testing machine, "Equivalent Drop Test" using an equivalent drop testing machine, and "Single Support Drop Test" using a crane. For test levels and conditions, refer to the general provisions of JIS Z 0200 and select the drop height based on the mass after packaging. If you wish to conduct a test, please feel free to consult us. 【Drop Test Methods】 ◇ Vertical Free Fall Test ◇ Equivalent Drop Test ◇ Single Support Drop Test ▼ For more details, please download the PDF document (recommended). ▼ For urgent inquiries, please contact us using the 'Contact Us' section below.

• Impact Test

The testing method applies an inclined surface test using an inclined impact testing machine.

"JIS Z 0205 (Horizontal Impact Test Method)" is a testing method used to evaluate whether packaging goods and containers made of metal, wood, cardboard, paperboard, plastic, or combinations of these materials are appropriate. The testing methods include horizontal surface tests, inclined surface tests, and pendulum tests, with our company applying the inclined surface test using an inclined impact testing machine. The test levels, impact speeds, and number of impacts are selected based on JIS Z 0200 General Rules for Testing Methods before conducting the impact tests. 【Impact Test Method】 ◇ Test Method: Inclined Impact Test ◇ Equipment Used: Inclined Impact Testing Machine ▼ For more details, please download the PDF document. (Recommended) ▼ Customers in a hurry, please contact us through the 'Contact Us' section below.

• Impact Test

We conduct over 300 transportation tests annually. We provide consistent support from the planning of the tests to the preparation of the test reports.

"JIS Z0212 (Compression Test Method)" is a testing method used to evaluate whether packaging goods and containers made of metal, wood, cardboard, paperboard, plastic, or a combination of these materials are appropriate or not. The testing methods primarily include "Method A," which conducts a compression test on packaging goods to investigate damage to the contents due to the compression load specified in JIS Z 0212, and "Method B," which performs a compression test on empty containers to determine the compression strength of the container itself. Additionally, there is a "Stacking Load Test" specified in the annex of JIS Z0212, and users can choose the testing method according to their testing objectives. ▼ For more details, please download the PDF document (recommended). ▼ Customers in a hurry, please contact us via the 'Contact Us' section below.

• Strength Testing Equipment

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.