We will be exhibiting at the "INCHEM TOKYO 2021" trade show!

We manage everything from system proposals, engineering, procurement, manufacturing, factory acceptance testing to on-site operations.

<Analysis Equipment> - Outside Analyzer House - 3-Sided Shelter - Inside Analyzer House - Sample Conditioning System (SCS) - Field Station - Pre-Sample Conditioning System

• Testing Equipment and Devices
• Other inspection equipment and devices
• Analytical Equipment and Devices

Fuji Kin's technological capabilities support the unknown high-pressure areas required for hydrogen stations.

This is a valve for hydrogen gas and liquid hydrogen. ■ Ultra-high pressure hydrogen gas compatible valve equipment A lineup of valve equipment for the near-future hydrogen society! - Control valves, shut-off valves, needle valves - Check valves, filters - Metal gasket fittings, welded fittings, cone & thread fittings ■ Ultra-high pressure liquid hydrogen gas compatible valve equipment This product is essential equipment for hydrogen stations. Based on accumulated technology, we have developed valve equipment that incorporates new technology to meet the needs for improving the filling capacity of hydrogen stations. <Features> Durability: 99.9 MPa Cryogenic compatibility: -253 to +50℃ 【Approximately 50 times compared to conventional】 High flow rate: Cv value 1 【Approximately 10 times compared to conventional】 Valve size: Overall height of the valve is about 50% less than conventional.

• Hydrogen battery
• valve
• Pipe Fittings

It is a valve with excellent "air tightness" and "maintainability."

A diaphragm valve that controls fluid by lifting the diaphragm at the drive part or pressing it against the valve seat, features excellent sealing properties due to the elasticity of the diaphragm. Additionally, it has no pockets in the fluid passage and is streamlined, allowing for easy maintenance by simply removing the bolts and nuts that secure the body and drive part to replace the diaphragm. This diaphragm valve is widely used in various fields requiring sanitary conditions, such as pharmaceuticals, food, and chemicals.

• valve

It is a control valve suitable for precise flow control in various research facilities and process lines.

"Minyucon" is a pneumatic actuated control valve manufactured by Fujikin, bringing together the full force of its genuine manufacturing capabilities. Its precision in control and reliability in operation make it suitable for precise flow control in various research experiments and process lines. The Cv value can accommodate a wide range from 0.0000015 to 5. With the adoption of a positioner, it achieves precise control with hysteresis below 1.5%. The inner valve is made of SUS316 with Stellite overlay, providing excellent wear resistance. For more details, please contact us or refer to the catalog.

• valve

<New V-Series> A 3-piece ball valve born from a new concept.

<Features> 1. 3-piece structure suitable for high flow rates 2. Can be opened and closed with a 1/4 turn of the handle 3. Connection types: V-Lok type, Rc, NPT male threads 4. Available in manual valve and automatic valve (single acting, double acting)

• valve

<New V-Series> A trunnion-type ball valve born from a new concept.

<Features> 1. Compact design that accommodates high flow rates. 2. Operable with low torque. 3. Flow patterns: 2-way type, 3-way type. 4. Can be panel-mounted.

• valve

<New V-Series> A plug valve born from a new concept.

<Features> 1. Simple and compact design. 2. Operable with low torque. 3. Full open and close operation with a 1/4 turn.

• valve

<New V-Series> A relief valve born from a new concept.

<Features> 1. Maximum operating pressure 41.3MPa 2. Can be set to the desired pressure using 8 types of springs. (Nominal diameter 6.35) 3. Can be set to the desired pressure using 3 types of springs. (Nominal diameter 12.7)

• valve

The <New V-Series> is a tube connector with excellent performance and quality.

<Features> The new V-Lok tube connector allows for connection simply by inserting the tube and tightening the nut, eliminating the need for special tools or open flames. Additionally, due to the unique interlocking action of the double ring, the ring effectively undergoes plastic deformation to compress the tube securely, resulting in very high pressure resistance.

• Pipe Fittings

This valve is ideal for use with high-purity fluids in high airtightness and high durability applications.

This is a so-called packless valve that uses a metal diaphragm for the external seal (a sealing method in the gland section that completely prevents fluid leakage by using a bellows or diaphragm instead of a gland packing or other methods). In addition to the high airtightness characteristic of conventional packless valves, it also offers high durability and is free of dead space, making it an ideal valve for use with high-purity fluids.

• valve

This is a flow control device that adopts a pressure control method for ultra-high purity applications.

A flow control system that enables high-precision flow control, which cannot be achieved with conventional mass flow controllers, by controlling pressure. 【Features】 ○ Simple and dead space-free structure ○ Excellent pressure fluctuation characteristics Since the output value does not fluctuate even when the upstream pressure varies, it can be installed on the upstream side. Additionally, it allows for the elimination of regulators from the gas system, achieving both cost reduction and miniaturization of the gas system. ○ Adoption of flow factor Compatible with various types of gases ○ Excellent accuracy ○ Equipped with flow self-diagnosis function ○ Quick response ○ Mount position free ○ Supports device network communication ● For other functions and details, please download the catalog.

• Flow Control

This is a flow control device that adopts a thermal flow sensor control method.

Achieved further total cost reduction and shortened lead time with a digital interface-equipped mass flow controller. 【Features】 ○ High precision Flow accuracy of ±1% ○ High-performance sensor Adoption of low-temperature flow sensors, achieving optimal structure for highly reactive gases and gases with low stability ○ High-reliability diaphragm valve with reduced gas contact area and prevention of particle generation Adoption of high-speed response piezo actuators Significant improvement in gas replacement characteristics due to dead space-free structure Minimal particle generation ○ Standard digital interface RS485 ○ RoHS compliant ● For other functions and details, please download the catalog.

• Flow Control

It will perform at its best in applications that require abrasion resistance, chemical resistance, corrosion resistance, and maintainability.

<Features> 1. Improved cost-effectiveness. 2. Reduced maintenance frequency. 3. Remarkable extension of valve lifespan. 4. Easy part replacement. 5. Ceramic parts covered and protected with stainless steel.

• valve

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

We would like to inform you that we will be exhibiting our products at the 25th Annual Meeting of the Japanese Society for Protein Science. If you plan to attend, please feel free to stop by. ❚ 25th Annual Meeting of the Japanese Society for Protein Science Date: June 18 (Tuesday) - June 20 (Thursday), 2025 Venue: Acurie Himeji Exhibition Booth: For details, please visit the official website of the Japanese Society for Protein Science. URL: https://aeplan.jp/pssj2025/ ❚ Products to be Exhibited - Transporter Measurement Device | SURFE2R N1 This device allows for label-free and real-time direct measurement of transporter currents without using fluorescent probes or radiolabeled ligands. - Artificial Lipid Bilayer Experimental Device | Orbit mini This device simplifies the challenging tasks of forming lipid membranes, reconstructing membrane proteins, and measuring single-channel currents in experiments using artificial lipid bilayers, all with just a micropipette. - Liposome Preparation Device | Vesicle Prep Pro This single device enables easy preparation of liposomes without hassle, accommodating various lipid conditions (such as DPhPC, DPPC, DOPC, etc.).

We will be exhibiting at the "Kyushu Printing Information Industry Exhibition 2026" held at the Fukuoka International Center. During the event, we will showcase various products. We invite all related parties to come together and visit us. 【Suppliers】 ・Laser-X

This year, Toyota Kikan will exhibit at the Toyota Business Fair. We will introduce products that are useful for heatstroke prevention and more. Our top recommendation is SPACECOOL. Please feel free to visit our booth! SPACECOOL is an "eco-friendly cooling solution" essential for the future of our planet's environment! Be sure to check it out. Also, take a look at the basic knowledge for heat prevention in factories moving forward.