ACE GLASS Price Revision Notice (2021)

Ideal for the polymerization and analysis of halogens through thermal decomposition under lime reaction! A high-pressure tube made of meat pressure glass, which excels in pressure resistance and heat resistance.

The ACE GLASS "Ace High-Pressure Tube" is a high-pressure tube made of thick-walled glass that excels in pressure resistance and heat resistance. 【Features】 8648 Ace High-Pressure Tube ◆ Made of thick-walled glass with excellent pressure resistance and heat resistance ◆ Pressure resistance is 150 psi (approximately 10.5 kg/cm²) at 25°C (reference pressure data) ◆ The plug is made entirely of PTFE and comes with a freeze-resistant FETFE O-ring as a double sealing material 8648M Ace High-Pressure Tube Mini-Nart Valve Type ◆ Equipped with a mini-nart valve that allows access with a syringe needle at the plug section ◆ By operating the green and red buttons on the valve, the valve can be opened and closed, allowing for the insertion and removal of samples ◆ Sampling can be done without exposing the sample to the atmosphere 8648B Ace High-Pressure Tube Plunger Valve Type ◆ The tube uses the same thick-walled glass with excellent pressure resistance and heat resistance as the 8648 ◆ The interior of the plug includes a bushing and plunger to allow purging within the tube ◆ The bottom of the plunger section is sealed, with a lateral hole on the side, allowing the internal tube to be opened and closed by moving the position of the plunger

• Glassware and containers

Ideal for storing highly volatile low-boiling point samples! The most basic high-pressure container.

The ACE GLASS "Ace High-Pressure Container (Safety Plug Bottle)" is the most basic high-pressure container set with a Teflon plug featuring an FETFE O-ring and a safety-coated bottle. We offer a variety of high-pressure containers. 【Features】 ◆ Pressure Resistance Made from high-quality thick glass. The internal pressure resistance is 100 psi (approximately 7 kg/cm²) even at low temperatures of -20°C. ◆ Sealing Performance With the sealing characteristics of internal threads and a Teflon O-ring providing double sealing, the container is securely sealed, maintaining high sealing performance. ◆ Inertness Made from high-quality thick glass and a completely inert FETFE adapter. ◆ Safety While made from thick glass that is resistant to breakage, to further enhance safety, the entire outer surface of the container is coated with a transparent film. In the event of breakage, the coating film absorbs glass shards and prevents the leakage of internal chemicals. ◆ Prevention of Peroxide Formation Before filling the sample, it is cleaned with inert gas, preventing the progression of peroxide formation as seen in metal containers. ◆ No Worries About Freezing Using an FETFE adapter with a Teflon O-ring eliminates concerns about freezing.

• Glassware and containers

The bottom of the vessel is tapered, allowing it to accommodate small-volume bubbling!

The "Ace Vacuum Trap" manufactured by ACE GLASS is a trap with an inner tube. We offer a variety of traps. 【Features】 8762 Mineral Oil Bubblers ◆ Trap with an inner tube of outer diameter 7mm ◆ The length of the inner tube can be adjusted by loosening the bushing screw ◆ The bottom of the vessel is tapered, allowing for small volume bubbling ◆ The bubbler consists of a vessel with a capacity of 40mL and a branch tube, an inner tube with an outer diameter of 7mm, and a #7 Ace threaded nylon bushing with a FETFE O-ring 8746 Vacuum Trap - Straight Type ◆ Composed of a test tube with a rounded bottom, 250mm in length, an inner tube with an outer diameter of 14mm, and a #15 Ace threaded nylon bushing with a FETFE O-ring 8747 Vacuum Trap - Serrated Type ◆ A type where the hose connection part of the 8746 is serrated (bamboo shoot-shaped) ◆ The serrated part comes with rings with a minimum outer diameter of 14mm and a maximum of 16mm

• Glassware and containers

For the storage of low boiling point substances and heating reactions of samples! Internal screw-type high-pressure vials.

Conventional vials with external threads made it difficult to prevent the evaporation of volatile substances during storage or when heating samples, making accurate sample preparation challenging. However, the Ace Mini Vial has overcome these difficulties. By attaching a #11 Ace thread to the screw section, even if the internal pressure increases, the internal threaded pressure-resistant plug provides solid protection and prevents the evaporation of volatiles, making it a high-pressure vial suitable for storing low-boiling substances and for heating reactions of samples. 【Features】 ◆ The internal threaded pressure-resistant plug provides solid protection even if the internal pressure increases, preventing the evaporation of volatiles. → By preventing the evaporation of volatiles during the storage of low-boiling substances or when heating samples, it clears the challenges of accurate sample preparation. ◆ Equipped with a #11 Ace thread on the screw section. ◆ A high-pressure vial suitable for storing low-boiling substances and for heating reactions of samples. ◆ An ideal vial for precise sample preparation.

• Glassware and containers

We offer a variety of connectors, adapters, and plugs from ACE Corporation! Teflon connectors and adapters for connecting multiple ACE threads.

The ACE GLASS "Ace Thread (Adapter and Connector)" is a Teflon connector, adapter, and plug equipped with FETFE O-rings. It connects and seals containers, bottles, or tubes that have Ace Threads. A variety of connectors, adapters, and plugs are available. 【Features】 5841 Coupling ◆ Connector for connecting multiple Ace Threads ◆ Teflon coupling with two FETFE O-rings 5843 Coupling (Reducing) ◆ Teflon coupling with two FETFE O-rings ◆ Adapter for connecting Ace Threads of different sizes 5846 Plug ◆ Plug for sealing containers, bottles, or tubes with Ace Threads ◆ Teflon plug with one FETFE O-ring 5844 Swedged Adapter ◆ Connector with NPT female threads cut in the middle of the adapter ◆ Compatible with Swedged tube connections ◆ Teflon adapter with one FETFE O-ring

• Plastic utensils and containers

ACE GLASS's patented product guarantees high sealing performance with an internal screw design!

【Features】 ◆ A patented product from ACE GLASS that guarantees high sealing performance with an internal screw type design. ◆ While the internal screw system itself forms a high seal, the use of O-rings further enhances the sealing capability. ◆ The Ace Thread Process Connector is made from thick Pyrex material. ◆ Connectors for processing containers and apparatus designed for high vacuum, high pressure, and high temperature applications (such as HPLC chromatography columns, vacuum manifolds, and high vacuum, high pressure, high temperature containers). ◆ A wide variety of Teflon joints and adapters are available for Ace Thread Connectors.

• Glassware and containers

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.