Achieve significant energy savings! Non-Freon energy-saving control panel cooler ENC-GR-eco series.

Energy-saving because it cools only as much as needed with inverter control!

The "ENC-GR-eco series" is an energy-saving, non-Freon control panel cooler that uses an inverter to control a compressor with a built-in DC motor. It does not operate at full capacity until the load rate reaches 100%, which reduces running costs, and because there are fewer temperature fluctuations inside the panel compared to ON/OFF control, it also reduces stress on electronic devices. 【Features】 ■ Up to 55% energy saving compared to conventional models (Eco) ■ All models support high-temperature environments up to 55°C ■ 200-240V free power supply ■ QR code for quick identification of model and manufacturing serial number *For more details, please refer to the PDF document or feel free to contact us.

• Control Panel Cooler

Eliminate maintenance for a long period! You can significantly reduce maintenance costs and man-hours!

The "GR-Pro" is a control panel cooler that not only eliminates the cost of refrigerants with its "non-Freon" design but also features new functions that further reduce the burden on customers. By adopting a finless condenser, there are no clogging points, which eliminates the need for filters and significantly reduces maintenance costs and labor. The risk of failure due to clogging is also minimized. Additionally, it can connect up to 32 units at once, allowing for temperature and error display as well as setting changes. 【Features】 ■ Low maintenance due to no clogging ■ Energy-saving (eco) and powerful cooling ■ High convenience with IoT compatibility ■ Lightweight, slim, and easy to install ■ User-friendly global specifications *For more details, please refer to the PDF materials or feel free to contact us.

• Control Panel Cooler

Contributing to the improvement of line operating rates and the reduction of unexpected repairs for control equipment! A simple explanation in 6 pages of manga.

【Case Study of Proposed Solutions】 ■Traditional Method - Using fan motors for cooling control panels ■Issues - High temperatures inside the control panels during summer cause malfunctions in control devices such as servo amplifiers and inverters - Consequently, the factory line stops ■Ideal Condition - The factory line does not stop due to malfunctions of control devices throughout the year ■Apisute's Proposal - Calculation of heat generation and investigation of current temperatures for each control panel - Installation of appropriate coolers for control panels based on heat generation ■Benefits - Stable temperatures inside control panels year-round, reducing malfunctions of control devices - Additionally, abnormal conditions of the control panel cooler are output externally. In case of emergencies, alerts will notify you *For more details, please refer to the related product catalog or feel free to contact us.

• Control Panel Cooler

Heat is a great enemy for electronic devices! To use them for a long time, it is necessary to keep the temperature low.

Introducing the relationship between the temperature inside the control panel and the lifespan and failure rate of electronic devices. Additionally, we will present the features of the control panel cooler 'ENC Series', which can solve this problem, while comparing it with traditional thermal countermeasures. 【Features】 ■ Internal circulation method that aids in "cooling, dust prevention, and dehumidification" ■ Cooling that is not affected by outside temperature ■ Reliable cooling up to the set temperature ■ Two mounting methods to choose from: side mount / ceiling mount *For more details, please refer to the PDF document or feel free to contact us.

• Control Panel Cooler

We exhibited a booth at the "4th Annual Meeting of the Japanese Society for Antibody Research" held at Omiya Sonic City from December 1 (Monday) to December 3 (Wednesday). Thank you very much to everyone who visited our booth during the event. Thanks to your support, we were able to successfully conclude the meeting. If you have any questions regarding the products you viewed, please feel free to reach out to us. We will respond to inquiries received during the event in due course. We appreciate your continued support of Higuchi Shokai. ▼Exhibited Products - Various assembly parts (bags, bottles, sampling, etc.) - Depth filters (post-culture filtration)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.