New Product: IP Long-Distance Transmitter "IP09 Series"

IP09CK for long-distance Ethernet transmission over coaxial cable!

The IP09CK is a coaxial cable long-distance transmitter that can extend Ethernet up to 1,000 meters, typically up to 100 meters. By combining it with its sister product "IP09," it allows for a mix of coaxial and LAN cables, enabling further extension. It also supports low power consumption with EEE (Energy-Efficient Ethernet). It has a built-in surge protector for safe use. - Long-distance Ethernet transmission with coaxial cables of 5C-2V or higher - Extension up to 500 meters at 100Mbps and up to 1,000 meters at 10Mbps (for 5C-FB) - Compatible with 10BASE-T/100BASE-TX/100BASE-T1 - Supports EEE (Energy-Efficient Ethernet) - Built-in surge protector

• Other security and surveillance systems
• LAN construction and wiring work
• others

The IP09K allows for long-distance transmission of up to 800 meters with a single LAN cable (without a relay)!

The IP09K is a product that enables long-distance Ethernet transmission with a single LAN cable. The IP09K is a set of two units of the IP09, which functions as both a transmitter and a receiver. It is primarily used for one-to-one connections, but it can also be used as a repeater, allowing for distance extension with each additional unit. (The IP09 is also available for individual sale.) - With a one-to-one connection, it can extend up to 500m at 100Mbps and up to 800m at 10Mbps. - Supports low power consumption with EEE. - Built-in surge protector (with a withstand voltage of 1.5kV).

• Other security and surveillance systems
• LAN construction and wiring work
• others

Repeater IP09 for extending 100M Ethernet up to 260m (130m on each input/output side)!

The IP09 is a repeater that extends 100M Ethernet up to 260m (130m on both input and output sides) and 10M Ethernet up to 500m (250m on both input and output sides). It can also be used as a transmitter by connecting one IP09 to another, with a transmission distance of up to 500m for 100M Ethernet and up to 800m for 10M Ethernet between two IP09 units. The distance can be extended with each additional unit. *The set of two IP09 units (with power adapter included) is model number: IP09K. - Supports 10BASE-T/100BASE-TX/100BASE-T1 - Auto MDI/MDI-X compatible - Supports full duplex and half duplex communication - Supports EEE (Energy-Efficient Ethernet) - Built-in surge protector (with withstand voltage: 1.5kV)

• Other security and surveillance systems
• LAN construction and wiring work
• others

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.