Primix will exhibit at the "International Secondary Battery Expo (Tokyo Big Sight)" in March.

Continuous manufacturing process and equipment for electrode slurry using Filmix® developed for dispersing electrode materials of lithium-ion batteries and fuel cells.

CDM stands for Continuous Dispersion Mixing, which is a continuous manufacturing process for electrode slurries using Filmix® developed for the dispersion applications of electrode materials in lithium-ion batteries and fuel cells. The nanoparticle design mixer (dispersion stirring device) Filmix® 56-L type is compatible with both batch and continuous processes. It can also be used by setting up a continuous line on a tabletop. ▼▼ Basic Procedure for Continuous Operation ▼▼ 1) Preliminary dispersion with a homodisperse or similar device 2) Transfer of the processing liquid using a pump 3) Dispersion with Filmix® ■ This single unit can be compactly used from research and development to small-scale production! ■ There are many successful scale-up cases from research machines to production machines! ◆◇━━━━━━━━━━ 　　Testing Now Available! ━━━━━━━━━━━◇◆ If you have materials that are problematic for dispersion or homogenization, please give it a try. We are currently offering two booklets related to battery manufacturing as a gift. 　◎ 'Battery Device Countermeasures Booklet'　　 　◎ 'Booklet on Fuel Cell MEA Manufacturing' * If you would like to request a test or booklets, please feel free to contact us.

• Mixer/agitator

[Video Available] Improve the quality and reduce costs of electrode material slurry! Numerous delivery achievements in the battery industry with the slurry manufacturing equipment Filmix® *Catalog available.

Filmix® is a mixer (dispersion stirring device) that enables sharp particle size distribution and micronization to nanometer sizes, which was difficult to achieve with conventional high-speed stirrers. It has a proven track record in the battery industry. ● Uniform Mixing The performance of lithium-ion battery electrode materials cannot be realized without uniform mixing. By using Filmix® to mix materials uniformly, a highly stable slurry can be produced. ● Accelerated Development Speed By achieving emulsification, dispersion, and nanometer-level micronization in seconds with Filmix®, development time can be significantly reduced. ● Testing Now Available! If you have materials that are challenging to disperse or homogenize, please give it a try! Additionally, we are currently offering two catalogs related to electrode material slurry production as a gift! ◎ "Continuous Production Technology CDM Process (Filmix® Catalog)" ◎ "Booklet on Fuel Cell MEA Manufacturing" *If you would like to request a test or catalogs, please feel free to contact us.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

Improving the quality of slurry and reducing manufacturing costs! Introducing continuous production technology for electrode material slurry using Filmix® (continuous processing in the kneading process).

Using the dispersing mixing device Filmix(R), active materials, conductive materials, solvents, and binders are uniformly dispersed in a short time. A slurry with high reproducibility of viscosity and excellent stability can be continuously produced. <Components of the CDM Process> ○ Pre-mixer ◎ Filmix(R) ○ Storage tank (conditioning tank) <Advantages of the CDM Process> ■ Produces high-quality slurry! ■ Reduces manufacturing time! ■ Cost reduction! (Compact factory, labor saving) ■ Easy to scale up!

• Secondary Cells/Batteries
• Lithium-ion battery
• Mixer/agitator

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.