Start of the homepage "Helpful Information" manga!

The "CPV" type has been introduced in the "CLIPIKA ACE" series of mold cleaning machines! In addition to the cleaning power of the "CPIII" series, it also supports diversity!

The CPV model has been newly introduced to the CLIPIKA ACE series of mold cleaning machines! Building on the proven cleaning power and performance of the CPIII series, it offers: ●Automatic lifting and lowering of the cleaning basket ●A flip-up type plus electrode ●And other new functions designed to meet diverse needs With these enhanced features, the physical burden during mold maintenance is significantly reduced. This enables mold maintenance that is accessible to people of all ages and genders. For everyone aiming to automate and improve the efficiency of mold cleaning: CLIPIKA ACE overturns the conventional belief that “mold maintenance requires skilled techniques” and “it is time-consuming and difficult.” 【Features of the CLIPIKA ACE Mold Cleaning Machine】 ●Automatically cleans molds placed in a dedicated basket ●Cleans multiple mold components simultaneously ●Cleaning solution penetrates every corner of the mold, thoroughly removing contaminants ●Does not damage the mold ●Uses no organic solvents

• Other cleaning machines
• Ultrasonic Cleaner

Cleaning of die-cast molds and large mold temperature control and cooling pipes is now possible with SkatS!

The mold temperature control piping cleaning machine "Scattos" has significantly increased the cleaning liquid capacity to 60L, in addition to the functions of the conventional "Water Reamer." It is now capable of cleaning the temperature control piping of die-cast molds and large molds, as well as accommodating manifolds and below hoppers. Furthermore, the synergistic effect with the specially formulated cleaning liquid (Scattos WR-1), which has enhanced penetration power, maximizes cleaning effectiveness. Please utilize it to help alleviate labor shortages. 【Features】 - Compatible with large molds, die-cast molds, manifolds, and below hoppers - Built-in flow meter to quantify cleaning effectiveness - Pump power increased threefold (compared to WR-11-ADIII) - Automatic control of pump power output according to piping diameter - Simultaneously removes rust and automatically forms a rust prevention coating - Enhanced cleaning power through hybrid cleaning

• Other physicochemical equipment
• Other cleaning machines
• Other surface treatment equipment

A welding machine that does not emit ultraviolet rays or fumes, eliminating the need for protective face shields and masks. It also prevents warping and distortion caused by heat!

Just when you're in a hurry, the mold suddenly breaks. You want to use it right away... The mold repair welding machine "Morhei" does not produce ultraviolet rays or fumes, allowing for mold repairs to be done with the naked eye without the need for protective face shields or masks. It welds at a temperature that won't cause burns even if touched with fingertips, enabling continuous power supply. Since it can build up material in a "surface" rather than just a "point," it can weld quickly without sparking. Another feature is that it is difficult to miss the target because the electrode is applied directly to the welding area. It prevents shrinkage and distortion caused by heat, and there is no thermal discoloration after welding. 【Features】 〇 Uses a paste-like welding material that fuses with the base material with minimal heat 〇 Capable of continuous welding from thick to thin linear buildup 〇 Compact design for portability 〇 No preheating or post-heating treatment required

• Plastic Mould
• Other molds
• Welding Machine

In areas such as construction sites and mountainous regions after rain, the ground can become muddy, causing vehicle and heavy machinery tires to sink. If the tracks become deep, it can lead to decreased work efficiency and changes in the flow of movement on site. Hyper CLT mats are lightweight wooden mats that utilize CLT. By laying them down on temporary roads, access routes, heavy machinery work yards, and material storage areas, they can reduce the area where vehicles make direct contact with the ground, serving as a measure to mitigate the disturbance of weak ground. The 5×10 mats weigh approximately 230 kg, making them relatively lightweight, and depending on site conditions, they can be easily installed, removed, or relocated using small machinery. It is also possible to consider replacing them in necessary locations according to the progress of construction and the condition of the ground. However, wooden mats alone do not completely reinforce the ground. It is important to check the ground's bearing capacity, settlement, slope, drainage, and vehicle weight, and to use them in combination with crushed stone, ground improvement, and fixing methods. Hyper CLT mats are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology "TH-250021-A." With wooden mats, NETIS, civil engineering, CLT, and lightweight wooden mats as new options, stable work pathways can be created on sites with weak ground.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*