Safety evaluation service for electric disinfectors with germicidal lamps.

We will provide a clear explanation of the regulations and safety standards that manufacturers must adhere to when importing and selling laser-equipped products in the United States.

In the United States, there are safety regulations regarding radiation exposure for products equipped with lasers. Manufacturers must ensure compliance with safety standards and complete the necessary procedures with the authorities when importing and selling laser products in the U.S. This seminar will explain the safety standards required and the procedures to be followed with the authorities when launching products in the U.S. market.

• Contract measurement

What are the requirements for the photobiological safety of products equipped with LEDs? We answer questions like this!

This booklet answers questions regarding the safety of LED radiation in a Q&A format. What are the requirements for the photobiological safety of products equipped with LEDs? How is the potential hazard of LED radiation from products expressed? How are the risk groups for LED radiation determined? These topics are covered. [Excerpt of Contents] ■ What are the requirements for the photobiological safety of products equipped with LEDs? ■ How is the potential hazard of LED radiation from products expressed? ■ Can radiation from lamps other than LEDs also be evaluated for photobiological safety? ■ How are the risk groups for LED radiation determined? *For more details, please refer to the PDF document or feel free to contact us.

• LED Module

How is the class of a laser determined? We are answering questions like this!

This booklet answers questions about laser safety in a Q&A format. It includes topics such as what the safety requirements for laser products are, how the class of a laser is determined, and how to know if the laser radiation emitted from a product is hazardous. Additionally, the classification of lasers is explained clearly using tables. 【Contents (excerpt)】 ■ What are the safety requirements for laser products? ■ How is the potential hazard of lasers from products represented? ■ How is the class of a laser determined? ■ How can we know if the laser radiation emitted from a product is dangerous? *For more details, please refer to the PDF document or feel free to contact us.

• others

UL Verified Mark - You can promote the safety of light radiation.

Laser and LED technologies are applied in various fields such as information technology, healthcare, entertainment, and the automotive industry. With the increase in products, manufacturers are pressured to differentiate their products in the market. On the other hand, for consumers, the incorporation of lasers and LEDs into more familiar products has made safety assurance an important factor in product selection. In this era, UL's Verified Mark is the optimal program to appeal to buyers regarding the safety of laser/LED light emission levels in products. Why is verification necessary? The UL Verified Mark program for laser/LED products is a third-party verification service aimed at verifying the emission levels of lasers/LEDs at reliable testing laboratories and utilizing the results in your marketing activities. By using it alongside UL's well-recognized safety evaluation services in the United States, it alleviates concerns for users and retailers while promoting brand transparency in the market. Products that measure laser/LED emission levels are categorized into three groups under this unique UL program.

• Public Testing/Laboratory

Technology and achievements related to LED products.

■IEC 62471 Evaluation UL is accredited as a CB testing laboratory for the international standard IEC 62471 concerning the photobiological safety of LEDs and lamps. We offer the following services based on the requests of manufacturers. <IEC 62471 Risk Group Determination for LEDs / Lamps> - We measure the spectral irradiance and spectral radiance of LEDs / lamps to determine the risk group for various hazards. - Deliverable: IEC 62471 evaluation report (using IECEE Official Test Report Form) - Accurately understanding the risk group of the radiation that can be exposed from the installed LEDs / lamps and the product is the first step in ensuring the safety of products equipped with LEDs / lamps.

• Public Testing/Laboratory

Technology and achievements that support advanced laser products.

UL provides conformity assessment services for laser product safety requirements in accordance with IEC 60825 and the U.S. FDA (CDRH) based on years of diverse evaluation experience with laser products. This allows manufacturers to verify that their products meet laser-related safety requirements as they enter the global market and obtain the technical documentation to support this. We encourage you to consider utilizing UL's laser product safety evaluation services. ■ IEC 60825 Evaluation UL is accredited as a CB testing laboratory for the international standard on laser safety, IEC 60825-1/-2. <Services Offered> - Determination of laser class for laser products - Safety evaluation of laser products ■ Support for U.S. FDA CDRH Laser Product Report Preparation Manufacturers selling laser products in the U.S. market are obligated to comply with FDA requirements and submit a Laser Product Report (and other required reports) to CDRH under U.S. federal regulations. <Services Offered> - Verification of FDA requirement compliance for laser products and preparation of CDRH Laser Product Report.

• Public Testing/Laboratory

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.