We have added a product page for the bulk bag collection dust collector!

A large amount of cutting debris generated during the cutting of thick aluminum plates can be directly collected into a bulk bag. When used with a bulk bag transport cart, it greatly improves work efficiency.

This is a simple dust collection machine that collects cutting chips into a Furecon bag. The chips are gathered in the Furecon bag and can be removed from the main unit using a dedicated cart. It helps improve the factory environment in terms of labor-saving and environmental aspects.

• Plastic processing machines (cutting and rolling)
• Dust collector
• Cyclone dust collector

Capable of cutting plates up to 200 mm thick. This model has been enhanced for improved functionality, including operability, maintainability, and environmental considerations, to further improve work efficiency.

The URKG cutting machine is a cutting machine that has been developed based on our years of experience in cutting aluminum plates. ■ URKG Series (New Model) - A model that enhances the basic specifications of the URK series. - Maximum thickness expanded to t200mm, improving performance. - Reduced cutting time. Cutting time is shortened by 50% compared to conventional machines using dedicated saw blades. - Cutting widths available in 1000mm / 2000mm / 3100mm, with three models. - Adopted a double circular saw cover with a telescopic cover and self-propelled cover, achieving over 95% chip recovery. - High operability achieved with a large touch panel. - Standard equipped with a workpiece lifting device, improving handling of heavy materials. - Unique anti-pinch device developed to prevent workpiece clamping (anti-pinch device) for 2000/3100 models.

• Special Processing Machinery
• Plastic processing machines (cutting and rolling)
• Other processing machines

Cutting a plate material with a maximum thickness of 70mm and a width of 1000mm in one swift cut at high speed!

The "UCTS-K1000A model" is a dedicated circular saw machine that moves the table to perform high-speed cutting with a powerful motor. It achieves a clean cutting surface without burrs using a dedicated saw blade. ■ Cutting dimensions: Width 1000mm × Thickness 70mm ■ Blade diameter: 405mm 【Features】 ■ Cutting is performed by sliding the table and using the saw blade ■ The table slide is assisted by an electric motor, making cutting easy ■ Accurate cutting is possible by measuring dimensions with a magnetic scale (optional) ■ Capable of handling everything from aluminum sheet cutting to plastic sheet cutting with machine specification changes.

• Other machine tools
• Plastic processing machines (cutting and rolling)
• Other processing machines

Support for thick plates, labor-saving, high-speed running saw. Thick plates can be transported with minimal force. This improves work efficiency and contributes to labor-saving and cost reduction.

The "URKM Series" is a circular saw cutting machine that precisely cuts aluminum plates. In addition to its powerful performance and efficient dust collection, the cutting conditions minimize cutting heat, reducing overcutting and enhancing machining accuracy. It allows for the selection of the optimal saw blade for cutting thick aluminum plates, enabling a reduction in cutting time. Reference cutting speed for A5052 with a thickness of 70 mm: F = 2500 mm/min. With two cutting modes—single-position cutting (ABS) and single automatic feed (INC)—efficient cutting operations can be performed. Additionally, it adopts an easy-to-read and simple-to-operate LCD touch panel control system. 【Features】 - The box motion (blade descent followed by blade retraction) reduces the waiting time for operators as the clamp opens after the blade descends. - With workpiece floating ball bearings, a 1-ton aluminum plate can be moved freely in 360° with just 30 kgf of force. - The workpiece is secured with clamps on both sides of the blade, ensuring safe and stable cutting without vibrations. - The telescopic circular saw cover follows the saw blade, efficiently sucking up chips. - The back gauge achieves precise dimensional accuracy with measurements in 0.01 mm increments.

• Other machine tools
• Plastic processing machines (cutting and rolling)
• Other processing machines

Significantly reduced cutting time compared to conventional machines. This model has enhanced functionality, including operability, maintainability, and environmental considerations, and has been developed to further improve work efficiency.

The URK cutting machine is a product born from our years of experience in cutting aluminum plates. ■ URK Series - Maximum thickness: 100 mm - Cutting widths: 1000 mm / 2000 mm / 3100 mm (3 models) - Unique anti-pinch device (anti-pinch blade) for preventing workpiece clamping (models 2000/3100) - Equipped with a uniquely developed blade cover, allowing for safe operation without exposing the blade. - The chip scattering prevention cover efficiently collects large amounts of chips with a dust collector, providing a clean environment. ■ URKG Series (New Model) - A model that enhances the basic specifications of the URK series. - Maximum thickness expanded to t200 mm, improving performance. - Reduced cutting time. Cutting time shortened by 50% compared to conventional machines using dedicated chip saws. - Cutting widths: 1000 mm / 2000 mm / 3100 mm (3 models) - Achieved over 95% chip recovery with the optional Pinocchio cover for chip scattering prevention and self-propelled blade cover. - High operability achieved with a large touch panel. - Standard equipped with a workpiece lifting device, improving handling of heavy materials.

• Plastic processing machines (cutting and rolling)

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

At construction sites, temporary parking lots may be established for workers and construction-related vehicles. On unpaved ground, mud and ruts can easily occur due to rain, which may hinder vehicle access. Hyper CLT mats are civil engineering materials that utilize wood CLT. By laying them in temporary parking lots, a suitable environment for vehicle passage and parking can be created while protecting the ground. They can be laid only in the necessary areas, and after the construction is completed, they can be removed and repurposed for temporary roads or access routes. The 5×10 panels weigh approximately 230 kg, and the 5×20 panels weigh about 460 kg, making them lightweight and easy to install and remove even with small machinery, allowing for changes in parking space. Additionally, they offer benefits unique to wood, such as glare reduction, noise reduction, and CO2 fixation. They are registered as a technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A," and can be utilized for the development of temporary parking lots and innovative public works.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.