◆New Product Information◆ Added product page for the vibration controller "RL-C21"!

Lightweight and compact design! A lineup of small inertial-type vibrators.

We handle the "Small Vibrator (Inertial Type)" manufactured by Dynalabs. This product features a lightweight and compact design that is portable enough to be held in hand. Additionally, it can be mounted at various angles and achieves operational performance at low frequencies. 【Features】 ■ Lightweight and compact design ■ Operational performance at ultra-low frequencies ■ Mounting at various angles ■ Equipped with low-friction bearing guide *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other analyses

The RL-C21 has a modular architecture feature and is a powerful multipurpose device that can be easily upgraded.

■Flexible Configuration Custom-made solutions are possible based on the user's testing requirements. ■System Expandability Up to 8 devices can be configured on a single network, with a maximum of 32 channel inputs and 8 channel outputs. ■High-Level Shaker Protection All calculations and safety checks are directly controlled by the DSP built into the controller. ■MEMS & MIMO Performance Up to 8 two-axis and three-axis shakers, as well as 6-axis shakers, can be controlled simultaneously. ■Damage Prevention Galvanic isolation of the input chain effectively protects the input chain from damage. ■Calibration Function (Optional) Calibration of shakers, transducers, and microphones can be performed with a single unit.

• Vibration Testing

Measure vibration and displacement using an interference method, and check the data in real-time on the monitor.

Vibromap is the latest vibration and displacement analysis device that combines the electronics speckle interferometry measurement method with a TV camera. In each mode, it is possible to monitor vibrations and displacements in real-time on the screen. Since the measurement data is displayed in real-time, it allows for conducting frequency sweeps, static deformation loads, etc., while viewing the screen. It can be applied to small electronic components like magnetic heads as well as vibration analysis of automotive engines.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices
• Optical microscope

An all-in-one model with a built-in amplifier and sine wave generator. It is compact and easy to handle, allowing vibration tests to start immediately.

We sell the compact, durable, and easy-to-handle "Small Vibration Generator" manufactured by DynaLabs. Starting with an all-in-one model that includes an amplifier and a sine wave generator, allowing vibration tests to begin immediately after installation, we also offer products for modal analysis and inertial types. You can choose products according to your testing requirements. 【Product Lineup (Excerpt)】 ◎ "Small Vibration Generator PM Series" ■ Model with built-in amplifier and sine wave generator (PM-20/100) ■ PM-250/440 high-output type, external amplifier (with built-in sine wave generator) ■ Equipped with terminals for external input signals, allowing arbitrary signal input from outside ■ Standard equipped with an adjustable base for conducting vibration tests at your desired angle ◎ "Inertial Vibration Generator IS Series" ■ Lightweight and compact for easy portability ■ Excellent performance in the low-frequency range ■ Through-hole structure allows for easy attachment to test specimens with bolts *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Vibration Testing
• Other inspection equipment and devices

All-in-one system for MEMS testing and R&D.

The TV holography vibration displacement analysis system "MEMSMap510" measures in-plane vibrations and out-of-plane vibrations. In the modeling and design of MEMS structures, the behavior of their fine structures differs significantly from that of larger structures, making analysis challenging. In dynamic devices, vibration modes can suddenly shift from one frequency to another due to the effects of heat, changes in air pressure, or boundary conditions. Therefore, real-time information across the entire surface regarding both static deformation and vibrations is necessary. The "MEMSMap510" will be a powerful tool for research and development of microstructures and product testing. It provides reliable data with user-friendly software. For more details, please download the catalog.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices
• Optical microscope

Flexible support for various angles with an adjustable base! A lineup of small vibrators for modal analysis.

We handle the "Small Vibrator (for Modal Analysis)" manufactured by DynaLabs. This product is lightweight, making it highly portable, and it is easy to align the modal analysis stick with the hole at the tip. The "DYN-MS-440" is capable of vibration with a maximum frequency of 5,000Hz, a maximum output of 440N, and a maximum displacement of 25mm, all while being lightweight. 【Features】 ■ Easy alignment of the modal analysis stick with the hole at the tip ■ Lightweight and highly portable ■ Flexible adjustment to various angles with an adjustable base ■ 25mm stroke and wide frequency range *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other analyses

Lightweight, portable, and highly durable! Easy to handle! Some models come with a built-in amplifier and sine wave generator! A variety of lineups available!

We handle the "Compact Vibration Tester (General Purpose Type)" manufactured by DynaLabs. This product is compact yet has high performance as a testing device, and it can flexibly accommodate various angles thanks to its adjustable base. The "PM-20" and "PM-100" come with built-in amplifiers and sine wave generators, and can be adjusted to frequencies ranging from 1Hz to 15,000Hz. 【Features】 ■ Lightweight, portable, and highly durable, easy to handle ■ Flexible adjustment to various angles with the adjustable base ■ Wide frequency range ■ PM-20 and PM-100 have built-in amplifiers and signal generators *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Vibration Testing
• Other analyses

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.