【Farad】◆ High Gain 63dB◆ NF 2.5dB◆ 0.5GHz- 6GHz ◆ Low Noise Amplifier◆ -55℃ to +85℃

Low-cost amplifier for 5G measurement

SuperApex Corporation, USA Frequency Range: 26GHz ~ 40GHz K Connector, DC Power +8V to +15V, 350mA Gain: 24dB P1dB Power: +23dBm Connector: K-Female *For more details, please refer to the PDF document or feel free to contact us.*

• Amplifier

Maximum rated input power +27dBm CW, NF 1.6dB, 3mm QFN 500KHz~3GHz, low noise amplifier

Frequency range: 500KHz~3GHz Gain: 26dB (typ) NF: 1.6dB@f=3GHz (typ) P-1dB power: +20dBm@+5V DC power supply: +3~+5V/70~130mA Package: 3x3mm QFN Maximum input power: +27dBm CW, 30s >30MHz For the front end of the receiver *For more details, please refer to the PDF document or feel free to contact us.*

• Amplifier

When wood is used at civil engineering sites, people often express surprise, asking, "Is this made of wood?" While many people associate "sheets" with steel plates, the sight of large wooden sheets lined up creates a strong impact at the site. Hyper CLT sheets are wooden lightweight sheets made from CLT (Cross Laminated Timber) that is laminated in a perpendicular direction. A 5×10 sheet weighs about 230 kg, making it relatively lightweight and suitable for use in temporary roads, access routes, heavy machinery work yards, and material storage areas. The natural color and texture of wood blend well with the landscapes of forests, rivers, parks, and residential areas, clearly conveying that the construction is environmentally friendly. The presence of wood can also serve as a catalyst for information dissemination in site tours and promotional photographs. Hyper CLT sheets are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology "TH-250021-A." Wooden sheets, NETIS, civil engineering, CLT, wooden lightweight sheets. The unexpected use of wood in civil engineering expands the impression of the site and the potential of new materials.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

The HDZ-0201 is a hydrogen leak detector designed for installation in equipment. It is used to measure the overall leakage from the entire inspected item (workpiece). - The atmospheric pressure chamber method involves covering the workpiece with a chamber, filling the inside of the workpiece with tracer gas, allowing the leaked gas to accumulate in the chamber, stirring the leaked gas, and forcing circulation to measure the gas concentration with a hydrogen detector. - The vacuum chamber method allows for high-sensitivity measurements by evacuating the chamber and then introducing atmospheric air into the chamber, directing the gas to the hydrogen detector. There are two methods available. It features a compact and lightweight design that is easy to integrate into equipment. Additionally, its concentration resolution capability is ultra-high sensitivity up to 0.1 ppm (depending on set conditions and environmental conditions). Detection principle: Semiconductor type Detection sensitivity: Equivalent to 1×10⁻⁶ Pa·m³/s (depending on inspection conditions and measurement environment) Usage: Equipment-integrated type (dedicated for installation in equipment) Resolution: 0.1 ppm Power supply voltage: DC 24 V External dimensions: W 93 × D 91 × H 97 mm

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.