Are you looking for high-quality stainless steel processing? Notification of product information update.

We can handle everything from small items to large ones! We accept high-difficulty stainless steel welding.

Stainless steel comes in martensitic, austenitic, ferritic, and duplex stainless steel (austenitic-ferritic) types, each with different characteristics, making welding difficult. Our company has a proven track record of welding various types of stainless steel, and we can accommodate a wide range of processing from palm-sized to large fabrication sizes. The thickness ranges from 0.5mm, with TIG welding capable of handling thicker materials up to 9mm, and for even thicker materials, we can propose multi-layer welding or semi-automatic welding as needed. [Features] ■ Proven track record of welding various types of stainless steel ■ Wide range of processing capabilities from palm-sized to large fabrication sizes ■ Proposals for multi-layer welding or semi-automatic welding as needed ■ Welding level compatible with nuclear products *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing

Width 4.8m × Depth 7.5m × Height 2.8m, capable of accommodating up to approximately 5 tons!

We would like to introduce the equipment of Shoei's "Shot Blast Work Area W4800xL7500xH2800." With dimensions of W4800×L7500×H2800, it can accommodate up to approximately 5 tons. The work area is equipped with two 4.8-ton cranes, providing good operability for tasks such as turning. There is also a painting booth within the same building, allowing for painting (natural drying) as well. 【Specifications】 ■ Material: Steel ■ Lot: 1 to 100 units ■ Precision: Others *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

The maximum diameter is a proven 600A! We handle everything from material procurement to can manufacturing, welding, finishing, and stress relieving.

We would like to introduce a case study of the "SUS304 Stainless Steel Piping Welding and Pressure Test" conducted by Shoei. We handle everything from material procurement, fabrication, welding, finishing, to stress relieving for piping. The maximum diameter we have achieved is 600A. Please feel free to contact us when you need our services. 【Specifications】 ■ Material: Steel, Aluminum, Stainless Steel ■ Lot: 1 to 100 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

A Rough Overview Company Introduction Movie

A professional video showcasing Shoei's craftsmanship. With powerful visuals of the manufacturing process and scenes filled with charm, this video is recommended for those who love craftsmanship.

• Contract manufacturing

Approximately 2800 x 2800!! In-house integrated production from drawing development to can manufacturing, welding, shot blasting, and painting.

We would like to introduce a case of "large fabricated airtight ducts" carried out by Shoei. The size is approximately 2800 x 2800 for large equipment ducts. We provided integrated production from material selection to fabrication welding, shot blasting, and painting. Please feel free to contact us when you need our services. 【Specifications】 ■ Material: Steel ■ Lot: 1 to 100 pieces ■ Precision: ±1cm or more (for large processing) *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

You can download the catalog of the can manufacturing company "Shoei" all at once.

Showei, a large can manufacturing company with a 20-ton crane. We produce everything in-house, from precision sheet metal to painting. Our manufacturing, supported by quality and management systems capable of handling nuclear products, will meet your expectations with "safety and satisfaction." We have compiled materials related to Showei and will present them to you. Please find them at the download link below.

• Contract manufacturing

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall