Here are some important points to consider when selecting metal seals such as spring-energized C-rings! <Materials available upon request>

A high-performance seal manufacturer introduces important points for selecting metal seals such as spring-loaded C-rings.

A high-performance seal manufacturer of seal products such as spring-loaded C-rings, metal seals HELICOFLEXⓇ, and metal hollow O-rings introduces important points for making metal seals functional, as well as key considerations for designers. The selection of metal seals is crucially dependent on the design of the corresponding flanges. The materials of the flanges and bolts, the tightening load (minimum required bolt load during tightening), pressure, temperature, and the method of bolt fastening are all related to the occurrence of insufficient compression in metal seals. ★This document can be viewed immediately by clicking the download button. 【Contents (partial)】 ■ How to make metal seals functional? ■ Seal selection based on allowable leakage rate ■ Compression and recovery of metal seals ■ Bolt load and other factors *For more details, please download the PDF or feel free to contact us.

• Sealing

Excellent leakage tolerance and corrosion resistance! We provide products customized to the sealing characteristics that meet our customers' applications.

The "HELICOFLEX Seal" is a sSpring-energized metal seal developed in collaboration with the French Atomic Energy Commission (CEA). The remarkable performance of this product is the result of years of research and development, experiments, and practical applications in markets such as nuclear energy, aerospace, high vacuum, oil refining/chemicals, gas, and other general industries. With flexible design capabilities, we provide customized products tailored to the sealing characteristics that meet your specific applications. 【Features】 ■ Seal diameter φ4 to 8000mm ■ Pressure range from 10^-10 mbar to 3000 bar ■ Temperature range from -272℃ to 800℃ ■ Acceptable leakage rates that accommodate from foam liquid levels to ultra-high vacuum levels ■ Compatible with all flange standards and flange surfaces (PNEUROP, ASME, ISO, JIS, etc.) *For more details, please refer to the PDF document or feel free to contact us.

• Sealing

It is a metal seal with elasticity! Compatible with RF/FF, T&G, NW/KF, three-face contact type, ICF/conflat, irregular shapes, and rectangular shaped grooves!

The "Spring-energized metal C-Ring HELICOFLEX(R) Seal" demonstrates sealing performance through the plastic deformation of the outer casing and the elasticity of the spring. It is compatible with pressures ranging from 10^-10 mbar to 3000 bar and temperatures from -272℃ to 800℃. It has excellent adaptability to flange shapes and distortions. Materials: Aluminum, silver, copper, nickel, stainless steel, and others. 【Features】 ■ Seal diameter Φ4 to 8000 ■ Cross-section diameter 1.5 to 40 ■ Compatible with pressures from 10^-10 mbar to 3000 bar ■ Compatible with temperatures from -272℃ to 800℃ ■ Highly resistant to radioactivity *For more details, please refer to the PDF document or feel free to contact us.

• Sealing

We introduce C-rings with sections and thicknesses that take into account compressive loads.

The sealing concept of "C-FLEX TM" is the elastic deformation of a metal seal with a C-shaped cross-section. It is compensated by the internal pressure of the equipment to accommodate low design tightening pressure and uneven surfaces of the flange. It is utilized in a wide range of applications, including crude oil extraction, industrial turbines, valves, aerospace, automotive, and SOFC fuel cells (750°C for 40,000 hours). 【Features】 ■ Unique C-shaped cross-section structure ■ Cross-sectional diameter and thickness designed for low tightening pressure ■ Compatible with internal pressure, external pressure, and axial direction ■ Low design tightening pressure ■ Pressure range: from medium vacuum to 200 MPa (2000 bar) ■ Temperature range: -273 to 730°C (-46 to 1350°F) ■ The structure enhances sealing performance by providing auxiliary force from the operating pressure on the equipment side to the C-FLEX. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Sealing

Section diameter and wall thickness considering design tightening pressure! We offer basic shapes and high-pressure balance types.

"O-FLEX TM" is a metal O-ring with a cross-sectional diameter and wall thickness that takes into account the design tightening pressure (Y value). It can be manufactured for both internal and external pressure, and rectangular shapes are also available. The pressure range is from high vacuum to 500 bar (7,252 PSI), and the temperature range is from -273 to 650°C (-460 to 1200°F). 【Features】 ■ Cross-sectional diameter and wall thickness considering the design tightening pressure (Y value) ■ Can be manufactured for both internal and external pressure ■ Basic type and high-pressure balanced type ■ Rectangular shapes are also available *For more details, please refer to the PDF materials or feel free to contact us.

• Sealing

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.