We will be exhibiting at the JASIS 2022 exhibition from September 7 (Wednesday) to September 9 (Friday)!

"All-weather testing lab" that realizes the "dynamic weather environment" of sensing devices. We contribute to solving challenges in advanced technology with environmental creation technology.

The all-weather test lab showcased at the CAR ELECTRONICS Expo can replicate all weather conditions (temperature, humidity, snow, rain, sunlight, fog, wind) as well as dynamic weather environments (constantly changing weather conditions). It can create complex weather environments by adding temperature and light to weather conditions such as snowfall, rainfall, and fog, as well as transitions from sleet to snow and from rain to fog, thereby simulating actual weather environments. This contributes to solving challenges in cutting-edge technologies in mobility markets and next-generation communication markets, which are sensitive to changes in weather conditions, as well as addressing social issues in disaster prevention, crime prevention, and agricultural markets. [Modules for Environmental Factors, Evaluation Examples, and Product Introductions by Process] - Solar Radiation Module - Rainfall Module - Fog Module - Snowfall Module - Vehicle Wind Speed Module - Temperature and Humidity Module - Dynamic Weather Environment/Complex Weather Environment Testing - Inspection Equipment - Power Device Evaluation

• Environmental Test Equipment
• Technical Seminar
• others

Added a new "tip heater type" with a temperature change rate of 100°C/min to streamline the temperature characteristic evaluation of semiconductors and electronic devices.

A chamberless system that sprays air adjusted to temperatures ranging from -40 to +180°C, streamlining testing processes. It can be utilized in combination with various measuring instruments and analysis devices for temperature characteristic testing, failure analysis, and quality testing of semiconductors and electronic devices. 【Features】 ■ Improved Testing Efficiency The advanced heater type has a temperature change rate of 100°C/min (air temperature) and reduces the time for temperature cycling and thermal shock testing by compactly enclosing the sample with an attachment at the nozzle tip. This significantly reduces power consumption. ■ Flexibility The advanced heater type allows the nozzle to be positioned exactly where needed using a horizontal and vertical multi-joint arm. The rear heater type employs a flexible hose, enabling the nozzle to follow the movement of the sample or evaluation device. ■ Testing without a Chamber or Door Using a dedicated attachment, it is possible to cool and heat the sample without any obstructions such as observation window glass or metal from a constant temperature chamber. This enables the evaluation of various in-vehicle sensors, including image sensors (cameras) and millimeter-wave radar, as well as combined evaluations with 3D deformation strain measurement systems and infrared thermography, and non-destructive internal observation of secondary batteries, semiconductors, and printed circuit boards in combination with X-ray transmission devices.

• Testing Equipment and Devices

Compact yet high-performance, achieving efficient environmental testing through networking.

The bench-top size constant temperature and humidity chamber, a compact environmental testing device, offers genuine environmental testing performance despite its small size. It features a combination of temperature (humidity) ranges and capacities (22.5L and 64L), with a type that has a temperature change rate of 5.0℃/min, resulting in a total lineup of 12 models. The controller is equipped with a color touch panel, enhancing operability and visibility.

• Printed Circuit Board
• Sensors
• Dedicated IC

Check driving conditions from remote offices or home! You can manage the surroundings of environmental testing devices all at once.

By simply connecting to the intranet, you can monitor the operational status of environmental testing equipment at a glance from your home using a web browser, and remote operation is also possible. This enables test management during telework. ■ From a distance, you can check the operating status of multiple testing devices and in-tank samples. * Note that a separate in-tank monitoring camera is required to check in-tank samples. * For more details, please refer to the PDF document or feel free to contact us.

• Process Control System
• CTI Support Center

We leverage our years of experience and achievements to provide comprehensive support for our customers' reliability testing.

At Espec, we have not only been involved in the sale of environmental testing equipment but have also conducted research on environmental testing and developed testing methods for many years. Leveraging our extensive experience and achievements, we undertake reliability testing for our customers, from the design of tests to evaluation and analysis, as well as improvement proposals based on evaluation results, either as individual processes or as a total service. Additionally, we have a new lineup of environmental testing equipment, allowing us to respond to various testing needs based on customer requirements. 【Features】 ■ Test design including surrounding systems (consulting) ■ Publicly recognized testing laboratory ■ Years of experience and achievements ■ Comprehensive support for customer reliability testing *For more details, please refer to the PDF materials or feel free to contact us.

• Other contract services

For high-temperature testing and heat treatment/drying on the production line.

■Achieves significant space-saving By adopting a slim design with a vertical layout of various components, including the control panel and heater, on the upper part of the main unit, the installation area has been reduced by 20.6% (compared to our company’s standards of capacity/installation area). This enhances productivity on the manufacturing line and effectively utilizes research and development space. ■Door interior is made with integrated pressing The molding of the door interior is done with integrated pressing, eliminating heat loss from metal seams. ■Capable of processing large quantities at once By strengthening the load capacity of the floor and shelves, it has become possible to perform large-scale heat treatment at once. Additionally, the shelves are sliding type, making it easy to load and unload samples. ■Constant temperature atmosphere inside the unit even with damper fully open Equipped with a damper for ventilation operations. Due to significant improvements in heating performance, there are no temperature fluctuations inside the unit caused by the damper opening, maintaining a constant temperature at all times. (When the ambient temperature is +20°C)

• LED Module
• Vehicle body parts
• Electrical equipment parts

We will be exhibiting at the J AGRI (J Agri) / Agricultural Materials EXPO held at Gran Messe Kumamoto from May 22 (Wednesday) to May 24 (Friday), 2024. 【Booth Number】: B1-43 Outdoor Exhibition Area Japan's largest comprehensive exhibition for agriculture and livestock, Agricultural WEEK, will be renamed J AGRI starting in 2024. This is a place where you can actually see, touch, and compare products. At our booth, we will showcase our lightweight resin flooring boards "JULIGHT / SUPER JULIGHT / RAKURAKUBAN" along with new products. Starting with the agricultural-specific flooring board "RAKURAKUBAN," which can be easily laid in various scenes such as around greenhouses, agricultural work sites, temporary parking lots, for the movement of agricultural machinery and light trucks, and for protecting truck beds, there are various ways to use the lightweight resin flooring boards "JULIGHT / SUPER JULIGHT series." We offer a variety of sizes and protrusion shapes tailored to customer needs, and they are lightweight enough to be carried by hand, with excellent impact resistance, as well as superior water resistance, weather resistance, and durability, providing outstanding features not found in plywood or steel plates. We sincerely look forward to your visit.

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

[Speaker] Toshio Fujimura, Ph.D. (Engineering) Representative, Touson Automotive Strategy Research Institute Automotive and Environmental Technology Strategy Analyst Visiting Professor, Aichi Institute of Technology [Former Toyota Motor Corporation] [Lecture Topics] <Chapter 1> Urgent Issue: CO2 Reduction Cannot Wait! <Chapter 2> Achieving a 48% Reduction in CO2 by 2030 Compared to 2019 is Impossible Without Carbon Neutrality in Fuels as Well as Electricity <Chapter 3> Technical Challenges in Electrification <Chapter 4> Pathways to Achieve a 48% Reduction in CO2 Emissions from Owned Vehicles by 2030 <Chapter 5> The Intentions Behind Electrification Strategies of Various Governments (Mainly in Europe, the U.S., and China) <Chapter 6> Electrification Strategies of Major Global Automakers and Sales Trends in Different Regions: Which Manufacturers Will Survive by 2030? <Chapter 7> Conclusion

[Speaker] Masayuki Sawada, Director of Sawada Masayuki Engineering Office [Lecture Topics] 1. The battle in Ukraine is the first large-scale drone war in history. 2. The battle in Iran also sees drones shifting the paradigm of strategy and tactics. 3. Efforts by major European countries (producing drones in Ukraine and collaborating with Ukrainian drone manufacturers). 4. Efforts by the United States (providing intercept drones and other support to Ukraine). 5. Efforts by Taiwan (producing drones in collaboration with U.S. manufacturers that have combat experience in Ukraine). 6. Efforts by Japan's Ministry of Defense (establishing a multi-layered coastal defense system using drones [SHIELD]). 7. Efforts by Japan's Terra Drone Corporation (collaborating with Ukrainian drone manufacturers). 8. Q&A / Business card exchange.