| Temperature Controller | Temperature Regulator |
Constant temperature system using temperature controller KLT-2.
This temperature controller is designed to stabilize the wavelength and power of a semiconductor laser using a Peltier device and thermistor.
Our temperature controller is a Peltier control device that maintains a specified temperature regardless of external factors by controlling the current flowing through the Peltier element based on the resistance changes obtained from a thermistor using PID control. When the temperature control unit is removed from the semiconductor laser drive system, fluctuations in optical power and wavelength occur. When heat is added to a bubble, its volume expands. Additionally, the resistance value of the measured substance changes when temperature is either increased or decreased. When temperature is reduced from a photodiode, the dark current decreases. In this way, the temperature controller demonstrates its effectiveness in controlling temperature-dependent physical properties that exist in the world. The feature of this device is that it allows anyone to easily achieve temperature control with compensated accuracy of 1/100°C to 1/10°C by using a thermistor (with linear correction circuit) or a platinum sensor for the temperature sensor and flowing PID (proportional, integral, derivative) control current to the Peltier or heater. Sufficient consideration must be given to the mass of the constant temperature plate, the capacity of the heat sink for heat dissipation, and the capacity of the Peltier used, depending on the load capacity of the substance being temperature-controlled.
Inquire About This Product
basic information
Below is an introduction to our temperature controllers. Please select the model as needed. Additionally, we accept custom orders for specifications other than those listed below. □MODEL No: KLT-2 Drive current: 6A, Drive voltage: 18V, Control temperature range: 0–60℃, Control accuracy: 1/100℃, Relative temperature: ±0.1℃, Applicable conditions: Uses Peltier and thermistor. □MODEL No: KLT-2PP Drive current: 6A, Drive voltage: 18V, Control temperature range: -20–100℃, Control accuracy: 1/100℃, Relative temperature: ±0.3℃, Applicable conditions: Uses Peltier and platinum resistance. □MODEL No: KLT-2R Drive current: 6A, Drive voltage: 18V, Control temperature range: -40–200℃, Control accuracy: 1/100℃, Relative temperature: ±0.5℃, Applicable conditions: Uses Peltier, platinum resistance, and chiller. □MODEL No: KLT-2HP Drive current: 3A, Drive voltage: 10V, Control temperature range: Room temperature to 100℃, Control accuracy: 1/10℃, Relative temperature: ±0.5℃, Applicable conditions: Uses heater and platinum resistance. □MODEL No: KLT-2HP Control temperature range: Room temperature to 200℃, Other specifications are equivalent to KLT-2HP.
Price information
340000
Price range
P3
Delivery Time
Applications/Examples of results
Usage: Our temperature controllers are widely used in industrial equipment as temperature control devices, in conjunction with various temperature sensors, Peltier drivers, heater drivers, etc. We manufacture and sell products such as vacuum chuck constant temperature plates, ultra-compact constant temperature baths, tabletop constant temperature baths, and temperature-controlled laser element mountings as system equipment that includes temperature controllers. Sales Achievements: Tokyo Institute of Technology, National Institute of Advanced Industrial Science and Technology, Osaka University, University of Tokyo, University of Electro-Communications, Tohoku University, Tokushima University, Keio University, Tsinghua University in China, RIKEN, NTT Research Institute, Optcom Co., Ltd., Mitutoyo Corporation, University of Colorado Boulder, Kinki University, Fukui University School of Medicine, Gunma University School of Medicine, Ocean University, Nagasaki University, Kobe University, Kyoto University, Nagoya University, Shizuoka University, University of Tsukuba, Kitami Institute of Technology, JAXA, Quantum Science and Technology Research Institute, etc., Furukawa Electric Co., Ltd., Sumitomo Electric Industries, Terumo, Fujifilm, SONY, Panasonic, Mitsubishi Electric, Granopt, Kyocera, Rohm, Fujitsu, NEC, Hitachi Construction Machinery, Tokyo Instrumentation, Tokimec, Mitsubishi Electric Wire, Hitachi Maxell, Toshiba Tec, SMM Precision, etc.
Detailed information
-
Max 60℃ Temperature Controller KLT-2 This device is the most basic type of temperature controller in the KLT series. The control temperature range is 0 to 60℃, and it boasts a control accuracy with a resolution and precision of ±1/100℃. This temperature controller was developed as a result of the pursuit of high precision and stability in the wavelength and power of semiconductor lasers, following advancements in optical communication. It uses a Peltier element for temperature control and employs a thermistor for temperature detection. The temperature control method utilizes P/I control.
-
MAX 100℃ Temperature Controller KLT-2PP This temperature controller is a standardized model with improved responsiveness, featuring a temperature control range of -20℃ to 100℃ and guaranteeing an accuracy of ±1/100℃. The specifications allow for temperature setting with a resolution of 0.01℃, and it uses a Peltier element for temperature control and a platinum sensor for temperature detection. The control method employs P/I control, and operations such as temperature setting and monitoring are centralized on the front panel, making it a user-friendly temperature controller.
-
MAX 200℃ Temperature Controller This device consists of a temperature control driving medium, a temperature detection sensor, and the controller body, and is a custom-made model that allows you to select a temperature setting range from -50 to 200℃. This device belongs to the KLT series and can set and control with a resolution of 0.1℃. The temperature control medium element is a Peltier device. Additionally, a platinum sensor is used for temperature detection. The control method for the Peltier device employs P/I control. Please use it as an internal temperature inspection equipment.
catalog（1）
Download All Catalogs
Company information
We undertake contract development and mass production of new products based on engineering technologies such as mechanical mechanisms, molds, electricity, and optics (lasers). The areas of contract development include the realization of research themes from industry, academia, and government, production equipment, medical and welfare devices, measuring instruments, electric vehicles, etc. We also realize various community comprehensive support projects for local governments. Our proposal allows you, regardless of the distance during your business trips, to use the free Skype system to communicate intentions in detail through live cameras (video and audio), enabling face-to-face discussions on-site to reach conclusions. Are you currently having meetings or administrative tasks with multiple companies? By consolidating vendors, your intentions can be directly conveyed to the manufacturing site, reducing the manufacturing burden (experimental preparation) that has previously fallen on you, allowing you to focus on your original research activities that add higher value. In the case of students, there may be many areas where they lack experience, such as element technologies, material selection, surface treatment methods, and drawing creation. However, without feeling ashamed, by sharing ideas from the conceptual stage, we leverage our years of support experience to provide advice and backup for realization while understanding your intentions, and we are committed to assisting you responsibly.
