Manual Rainbow Mini Controller SP002E Type

basic information

2. Product Details Input/Output Voltage) Note: Since there is no transformer, the input voltage is output as is. - Input: DC 5V (compatible with 12V/24V wide voltage) - Output: DC 5V 30W (12V 72W / 24V 144W) max 6A (RGB * 2A each) Input/Output Wires) - Input Wire: 2P length 10cm 20# (0.5sq allowable current 7A) round wire / parallel wire - Output Wire: 3P length 10cm 20# (0.5sq allowable current 7A) round wire / parallel wire Terminals) Note: If the quantity is 1000 or more, custom terminals can be ordered. - Input Terminal: 5521 DC female, or none (: 2P parallel wire end 3mm stripped), or as requested - Output Terminal: SM 3P female (: wire to wire), or none (: 3P single wire one end 3mm stripped, wire to wire), or XH 3P female (: wire to board), or as requested Optional Parts Description): These are optional parts to be attached to the holographic tape side. 1. SM 3P male wire (soldered to the holographic tape side, for wire to wire 2.54mm) (Figure 8) 2. XH 3P male wire (soldered to the holographic tape side, for wire to board 2.54mm) (Figure 9)

Price information

Controller main unit (shipping costs separate, optional parts separate) Reference order production unit price - Quantity 10,000: 280 yen - Quantity 4,000: 290 yen - Quantity 1,000: 300 yen The following are reference tax-included unit prices when in stock - Quantity 100: 330 yen - Quantity 10: 360 yen - Quantity 1: 390 yen Representative display unit price: 390 yen Optional parts: 1. SM3P male connector (Figure 8) 2. XH3P male connector (Figure 9) Optional control methods: In addition to this manual type, there are also infrared remote control type, Bluetooth short-range wireless type, and custom fixed control type available.

Price range

P1

Delivery Time

P4

Applications/Examples of results

- Main purpose: Manual decorative flashing of RGB three-color LED lights - Main compatibility: Soft RGB LED tape light 5050 / Hard LED aluminum rod / Point light sources, etc. Details of compatible driving IC (Figure 2) Composition of this controller: 3-pin 3-key : Input line → This manual RGB mini controller board → Output line Explanation of the 3-pin pin (3-color line) (Figure 3) - White gnd: Common power/signal ground wire - Green do/din: Signal wire - Red vcc/5v/12v: Common power wire for RGB Explanation of the 3-key (Figure 4) - Ⓜ+: Mode + key) 76 modes forward - Ⓢ: Speed key) Speed switching circulation - Ⓜ-: Mode - key) 76 modes backward - Ⓜ+Ⓜ- simultaneous press: 76 modes automatic switching - Connection method with compatible devices: (Power adapter) → This manual RGB three-color mini controller → (RGB three-color LED tape light and other three-color LED lights) Wiring diagram (Figure 3) (Separately: IC-equipped RGB LED tape) → This manual RGB mini controller → (Separately: Power adapter 5V/12V/24V) - Completed product photo (Figure 5)

Detailed information

• 

  SP002E type

• 

  Adaptation-driven IC detailed part numbers (Figure 2) - Main: 5V built-in SK6812 WS2812B, 12V external WS2811 - Sub: SK6812-RGBW APA102 G8205 G8208 LPD6803 LPD8806 P943S P9411 P9412 P9413 P9414 SK9822 SM16703 TM1804 TX1812 TX1813 UCS1903 WS2801 WS2813 WS2815 WS2818, etc.

• 

  Explanation of the 3-pin (3-color wire) (Figure 3) - White gnd: Common ground for power/signal - Green do/din: Signal wire - Red vcc/5v/12v: Common power wire for RGB

• 

  (Description of the 3 keys) (See Figure 4) ・Ⓜ＋: Mode + Key) 76 Mode Forward ・Ⓢ: Speed Key) Speed Switching Cycle ・Ⓜ－: Mode - Key) 76 Mode Reverse ・Ⓜ＋Ⓜ－ Simultaneous Press:) 76 Mode Automatic Switching

• 

  Finished product photo (Figure 5)

• 

  (Figure 6) Adaptive Iridescent Tape Light - 1 5V Built-in IC Soft Iridescent LED Tape Light Example) SK6812/WS2812B-5050-60RGB Cutting Unit: 1SMD

• 

  (Figure 7) Adaptive Illusion Tape Light - 2 12V External IC Soft Illusion Running Horse LED Tape Light Example) WS2811-5050-60RGB Cut Unit: 3SMD

• 

  Optional Component Description - 1): This is an optional component that attaches to the side of the holographic tape. 1. SM3P Male Wire (soldered to the holographic tape side, for wire-to-wire connection, 2.54mm) (Figure 8) It is used when connecting the manual holographic controller (wire output SM3P Female) to the holographic tape (wire input terminal SM3P Male). An SM3P Male is required for the input terminal on the holographic tape side.

• 

  Optional parts description - 2): This is an optional part that attaches to the side of the rainbow tape. 2. xh3p male wire (soldered to the rainbow tape side, for 2.54mm board connection) (Figure 9) It is used to connect the rainbow controller (board output terminal xh3p female) to the rainbow tape (wire input terminal xh3p male). An xh3p male is required for the input terminal on the rainbow tape side.