Jet scrubber machine

Added to bookmarks
Bookmarks list

Bookmark has been removed
Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration

last updated：Feb 17, 2022

Official site

Future ultra-thin plate products can be accommodated! The nozzle unit position is designed at an oblique angle with two sets at the top and two sets at the bottom.

This product is a jet scrubber machine that applies a wide 12mm disk and a roller spacing of 25mm pitch. It is designed to enable the transfer and processing of ultra-thin sheet products with a minimum thickness of 0.06mm (core). It will be capable of handling ultra-thin sheet products in the future. 【Features】 ■ The nozzle unit positions are designed at an angle with 2 sets on the upper part and 2 sets on the lower part. ■ Uniform spraying is possible. ■ The drive unit is designed for easy maintenance and repair. ■ The spicoron is designed in a B-type two-row parallel system to achieve maximum recovery rate. ■ A cover method using PVC piping is applied instead of the existing cable tie method. ■ Easy maintenance. *For more details, please refer to the PDF materials or feel free to contact us.

Related Link - http://rat-corporation.com/

Inquire About This Product

basic information

【Zet Scrubber Management】 ■ Powder Replacement Cycle and Method - The frequency and method of replacement are not constant depending on the usage environment and time. In the case of 8Hr/D, check and replace after approximately one month of use. ■ Concentration Measurement - Use the measurement valve on the side of the pump to fill a beaker with the abrasive, allow it to settle, and then measure the concentration in proportion to the volume in the beaker. ■ Equipment Shutdown and Management - The abrasive is in a solid state embedded in the rollers when the equipment is stopped, but it dissolves immediately in water when cold water below approximately 35°C is supplied. *For more details, please refer to the PDF document or feel free to contact us.